Cypress Semiconductor CY3215-DK User manual

CY3215-DK IN-CIRCUIT EMULATOR DEVELOPMENT KIT
QUICK START GUIDE
Install Software
1. Install PSoC Designer from the CD-ROM
or download the latest version from
http://www.cypress.com/psoc.
Use MiniEval to Evaluate
1. Attach the Flex cable and Pod to the
ICE-Cube.
2. Plug the 28-pin feet to the Pod and
connect MiniEval board via the ZIF
socket.
3. Create a project in PSoC Designer and
start debugging.
Use MiniEval to Program
1. Attach the backward compatibility
adapter to the ICE-Cube in the place
of Flex-Pod.
2. Connect the RJ45 end of the ISSP
cable into the adapter.
Use MiniEval to Program
3. Connect the 5-pin connector of the ISSP
cable to the MiniEval.
4. Program the parts using PSoC
Programmer.
1
2
3
4

© 2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks
referenced herein are the properties of their respective owners. DOC#: 001-64232 REV. *A
www.cypress.com/go/CY3215-DK
For the latest information about this kit visit
CY3215-DK IN-CIRCUIT EMULATOR DEVELOPMENT KIT
QUICK START GUIDE
CY3215-DK Kit Contents
ICE Base Unit ISSP Cable
USB 2.0 Cable
CY3250 Flex Cable
29000-28
PDIP Kit 12-V 1-A Adapter
MiniEval Board
Blue Cat 5e Cable
Backward Compatibility
Adapter
ZIF Socket
2 Units of 28-Pin
DIP Samples
(CY8C29466-24PXI)