Cypress Semiconductor CY3655-EXT enCoRe II User manual

CY3655-EXT enCoRe™ II DEVELOPMENT KIT
QUICK START GUIDE
Unpack the CY3655-EXT enCoRe II DVK
contents.
Insert 40-pin DIP foot on to the application board.
Align the enCoRe II pod over the DIP foot.
To connect button S1 to P0.2 place a jumper
on J11. To connect button S2 to P0.3 place a
jumper on J16. To power the application
board by VBUS place a jumper at J5.
Go to Control Panel > Mouse > Pointer
Options; uncheck “Enhance Pointer Precision”
option. Open a drawing application such as
Paint.
Connect B side of the USB A/B cable to the
CY3655-EXT enCoRe II Application board and
the A side to the PC. The DrawUSB example
enumerates on the PC as a USB Mouse HID
device in Device Manager.
Press the S1 button on the board; the cursor
moves in the shape of letters U, S, B. Press the
S2 button to toggle the left mouse button.
1
2
3
4
5
6

© 2011-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered
trademarks referenced herein are the properties of their respective owners. DOC#: 001-70338 REV. *A
http://www.cypress.com/go/CY3655-EXT
For the latest information about this kit, visit
CY3655-EXT enCoRe™ II DEVELOPMENT KIT
QUICK START GUIDE
CY3655-EXT Application Board Details
40-Pin DIP
Socket
ISSP Header24-Pin DIP Socket
Analyzer
Headers
Prototyping
Area
LEDs
Buttons
USB B Connector
PS/2 Port