Cypress CSLUX-1080p User manual

CSLUX-1080p
SCART to HDMI 1.3
SD to Full HD
Scaler Box
Operation Manual
CSLUX-1080p

Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.

Revision History
Version No Date Summary of Change
V1 20090424 Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
SCART to HDMI Scaler Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage SCART to HDMI Scaler Box.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage SCART to HDMI Scaler Box.

Table of Contents
1
1
1
1
1
2
2
2
3
3
4
1. Introduction…………………………………………………........……….
2. Application…………………………………………………................….
3. Contents……………………………………………….........................…
4. System Require…………………………………….…………........…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions…………………………………….
6.1 Front Panel ...................................................................................
6.2 Rear Panel ………………………………………….........….....….…
7. Connection and Installation…………………………….........……..…
8. Output Resolution Chart……………….………………...........………..
9. Specications……………………………………………...........………..

1. Introduction
This scaler Box is designed to display your analog video/R.G.B images on the
HDTV with better viewing resolutions. It can upscale any SCART'S input sources
to HDMI output with wide-range resolutions. Further, this device also can
transfer sounds for user to enjoy both HD images and sounds consistently.
2. Application
 Convert video to HDMI 1.3 at 1080P for HDMI LCD TV / LCD monitor
 To improve video quality to HDMI resolution
3. Contents
 CSLUX-1080P Scaler Box
 5VDC Power Supply Adaptor
 Operation Manual
4. System Require
Input source device, SCART cable HDMI cable and output displayer.
5. Features
 HDMI 1.3 support deep color 12 bit, HDCP 1.1, DVI 1.0 compliance
 Scales up SCART to HDTV 1080p format
 Automatic lipsync (audio delay) ensures audio video synchronization
 Input video systems NTSC/PAL
 Support 8/10/12 bit deep color on HDMI output up to 6M long
 DVI compatible by using HDMI to DVI adaptor
 HQE (High Quality Image enhancer) function
 Digital Noise Reduction – Minimises picture noise, reproducing images
true to the original
 Block Noise Reduction – Effectively minimizes all MPEG noise, Improving
the digital quality of HDTV broadcasts in particular, where block noise
happens most
 MPEG Noise Reduction – Reduce mosquito noise for MPEG video
images without losing detail
 3D (frame based) motion adaptive noise reduction
 Advanced 3D motion adaptive de-interlace
 Automatic 2:2/3:2 film mode detection
 Automatic resolution selection and individual resolution selection button
 HDMI output with RGB color space design
1

6. Operation Controls and Functions
6.1 Front Panel
①POWER selection button - Press the button once to power on the unit,
press again to power off. This device has last memory’s function and will
record your last input selection.
②AUTO selection button - Press the button to set the device in Auto mode
and the device will auto detected HDMI display’s EDID resolution native
then the resolution indicator LED will illuminate.
③MANUAL selection button - Press “MANUAL”button to select resolution of
the HDMI output from 576P to 1080P.
6.2 Rear Panel
①HDMI OUTPUT – Connect to LCD TV/monitor with HDMI cable.
Note: This scaler does not have overscan function however, it may be
adjusted by TV.
②SCART INPUT – Connect from source with SCART cable.
③DC 5V – Plug the 5V DC power adaptor into the unit and connect the
adaptor to AC wall outlet.
1 2 3
CSLUX-1080P
SCART to HDMI Scaler
POWER AUTO 576P
1080I
720P
1080PMANUAL
1 2 3
OUTPUT INPUT
DC 5V
SCARTHDMI
2

7. Connection and Installation
8. Output Resolution Chart
LCD TV /
HD MONITOR
Scaler Box
DVD /
Video player
RESOLUTION
576P
720P
1080I
1080P
720 X 576
1280 X 720
1920 X 1080
1920 X1080
50HZ
60HZ / 50Hz
60HZ / 50Hz
60HZ / 50Hz
OUPUT
INPUT 576P 720P 1080I 1080P
NTSC XO
(60Hz)
O
(60Hz)
O
(60Hz)
PAL OO
(50Hz)
O
(50Hz)
O
(50Hz)
3

9. Specications
Input port SCART
Output port HDMI
Output resolution 576p, 720p, 1080i, 1080p@ 50/60
Input signal levels Video:1Vp-p, (75Ω)
RGB: 0.7 Vp-p(75Ω)
Audio L/R: 0.5Vrms
Video System NTSC, PAL
Audio Sampling Rate 48KHz
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL
certified)
Dimensions (mm) 151 x 125 x 30
Weight (g) 340g
Chassis Material Aluminum
Silk Skin Color Black
Operating Temperature From 0ºC~ 40Cº
Power Consumption 6W(max)
4