Cypress CP-283HD User manual

Dual HDMI to HD
Component
Converter
CP-283HD
Operation Manual
Introduction
Cypress CP-283HD is an HDMI to component (YCbCr/YPbPr) converter with audio
output. It allows you to switch between 2 HDMI sources and convert it to component
and analog audio (L/R) or digital audio (Co-axial) output at the same time.
It supports high definition up to 1080p, and output resolution follows input.
Features
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports a wide range of resolutions: 480i/480p/576i/576p/720p/1080i/
1080p@50/60Hz.
3. Supports digital audio output through Co-axial cable, or analog audio output
through L/R audio cable.
4. IR remote control.
5. HDCP compliant - when input is HDCP encrypted (protected) the component
out will be turned off.
Operation Controls and Functions
Front Panel
1. POWER:
Press the "POWER" button to turn on/off power of the unit.
2. INPUT Select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source and
the LED will illuminate to indicate which input source is selected.
3. Remote control sensor.
4. COAXIAL OUT:
Connect the coaxial audio output port to the input port of your audio
equipment such as amplifier using coaxial cable.
5. HDMI 2 IN:
Connect the HDMI 2 IN port to the output port of your HDMI source equipment
such as DVD Player or Set-top-box.
Rear Panel
1. HDMI 1 IN:
Connect the HDMI 1 IN port to the output port of your HDMI source equipment
such as DVD Player or Set-top-box.
2. AUDIO OUT:
Connect the L/R audio output port to the input port of your display or audio
equipment such as amplifier using L/R audio 3.5 mm cable.
3. YPbPr/YCbCr Output:
Connect the YPbPr/YCbCr output (3 RCA) ports to the video input ports of
your display equipment such as HDTV.
4. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall
outlet.
Remote Control
1. Power:
Press the button to turn on/off the unit.
2. HDMI 1 IN input select:
Press the button to select HDMI 1 input source.
3. HDMI 2 IN input select:
Press the button to select HDMI 2 input source.
4. Void buttons (No function.)
Specifications
* Input: 2 x HDMI female ports
* Output:
Video: High definition component YPbPr/YCbCr on 3 RCA connectors
Audio: Digital audio on CO-AX or analog audio on R/L
* Power: 5V DC power supply
* Dimensions: 102(W) x 90(D) x 25(H)mm
* Weight: 220g
HDMI 1
IN
AUDIO
OUT Pr/Cr Pb/Cb Y
DC 5V
1 2 3 4
1 2
1
42
3
1 2 3 4 5
POWER
HDMI 1 HDMI 2
HDMI 2
ININPUT
COAXIAL
OUT
CP-283HD 2X HDMI to HD
Introduction

Introduction
Cypress CP-283HD is an HDMI to component (YCbCr/YPbPr) converter with audio
output. It allows you to switch between 2 HDMI sources and convert it to component
and analog audio (L/R) or digital audio (Co-axial) output at the same time.
It supports high definition up to 1080p, and output resolution follows input.
Features
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports a wide range of resolutions: 480i/480p/576i/576p/720p/1080i/
1080p@50/60Hz.
3. Supports digital audio output through Co-axial cable, or analog audio output
through L/R audio cable.
4. IR remote control.
5. HDCP compliant - when input is HDCP encrypted (protected) the component
out will be turned off.
Operation Controls and Functions
Front Panel
1. POWER:
Press the "POWER" button to turn on/off power of the unit.
2. INPUT Select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source and
the LED will illuminate to indicate which input source is selected.
3. Remote control sensor.
4. COAXIAL OUT:
Connect the coaxial audio output port to the input port of your audio
equipment such as amplifier using coaxial cable.
5. HDMI 2 IN:
Connect the HDMI 2 IN port to the output port of your HDMI source equipment
such as DVD Player or Set-top-box.
1
1 2 3 4 5
POWER
HDMI 1 HDMI 2
HDMI 2
ININPUT
COAXIAL
OUT
CP-283HD 2X HDMI to HD

Rear Panel
1. HDMI 1 IN:
Connect the HDMI 1 IN port to the output port of your HDMI source equipment
such as DVD Player or Set-top-box.
2. AUDIO OUT:
Connect the L/R audio output port to the input port of your display or audio
equipment such as amplifier using L/R audio 3.5 mm cable.
3. YPbPr/YCbCr Output:
Connect the YPbPr/YCbCr output (3 RCA) ports to the video input ports of
your display equipment such as HDTV.
4. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC wall
outlet.
Remote Control
1. Power:
Press the button to turn on/off the unit.
2. HDMI 1 IN input select:
Press the button to select HDMI 1 input source.
3. HDMI 2 IN input select:
Press the button to select HDMI 2 input source.
4. Void buttons (No function.)
Specifications
* Input: 2 x HDMI female ports
* Output:
Video: High definition component YPbPr/YCbCr on 3 RCA connectors
Audio: Digital audio on CO-AX or analog audio on R/L
* Power: 5V DC power supply
* Dimensions: 102(W) x 90(D) x 25(H)mm
* Weight: 220g
HDMI 1
IN
AUDIO
OUT Pr/Cr Pb/Cb Y
DC 5V
1 2 3 4
2
1
42
3

Connection and Installation
3
HDTV
Co-ax
Cable
HDMI
HDMI
HDMI
HDMI
HDMI
Cable
HDMI
Cable
DVD
Amplifier
STB
L/R
Cable 3RCA to
3RCA Cable
CP-283HD