Cypress CP-1262HE User manual

CP-1262HE
HDMI to PC/Component
Converter with
Audio Box
Operation Manual
CP-1262HE

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology.
All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
 To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
VS1 20101201 Add HDCP Description
VR2 20110721 Bi-level Synchronisation

Table of Contents
1
1
2
2
2
3
4
5
6
1. Introduction ……………………..……………………...…........….…….
2. Features …………………………………………......……........…...……
3. Operation Controls and Functions ……………...……..............……
3.1 Front Panel ..............................................................................
3.2 Rear Panel .…………………………………..…….......…...….…
4. Connection and Installation ….………………….........…..…..…......
5. HDMI Connector Pin Assignment ...................…..........…..…....…...
6. Specications ………………………………...……..........………....….
7. Acronyms …......................................................................................

1. Introduction
This converter box converts digital HDMI to Analog PC or SD/HD output. It
enables to connect the HDMI sources to the analog PC monitor, Projector or
TV. Its high bandwidth capability supports a wide range of PC and HDTV
resolutions.
2. Features

Supports HDMI input and Analog PC or SD/HD output.

Supports output selection between YPbPr and RGB.

Supports input/output resolution as below:
PC: 640x480= VGA59 , VGA60, VGA72, VGA75, VGA85
800x600= SVGA56, SVGA60, SVGA72, SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864= MAC70, MAC75, MAC85
1280x800= WXGA60
1280x1024= SXGA60, SXGA75, SXGA85,
1440x900= WXGA60
1600x1200= UXGA60
1680x1050=WSXGA+60
1920x1200= WUXGA60(pixel-rate=154MHz)
HD: 480I60, 576I50, 480P60, 576P50, 720P60, 720P50, 1080I60, 1080I50,
1080P60, 1080P50
Note:
①󳌤As component output at 720p/1080i/1080p needs Tri-level
synchronisation in order to allow the image to be display properly.
This device supports only bi-level synchronisation and therefore,
when output component timing at 720p/1080i/1080p some display
may shift to the left side of the screen. This is due to the incorrect
start counting point.
󳌤󳌤󳌤②󳌤
If HDMI source includes HDCP(High-bandwidth Digital Content
Protection), output display is not supports HDCP decryption and
no image will display.

Built in EDID.

HDMI 1.3, HDCP 1.1 and DVI compliant.
Note: This product does not process HDCP input. When receiving content
that has HDCP encyuption there will be no video output.
1

3. Operation Controls and Functions
3.1 Front Panel
DC 5V
RGB
YPbPr
OUTPUT HDMI INPUT
① ② ③
①󳌤󳌤YPbPr/RGB switch: Set the switch to RGB when your HDMI source
equipment is PC graphic card or other digital RGB source signal. Use HD-
15 to HD-15 VGA cable to connect between the unit's RGB out and the
RGB input of your PC monitor, or projector. Set the switch to YPbPr when
your HDMI source equipment is DVD player, set-top-box or other High
definition digital video source. Use a VGA to 3 RCA adaptor cable to
connect the unit's YPbPr out to the YPbPr input connector of your HDTV.
Note: When YPbPr output from HD-15 D-Sub the H-pin and V-pin will
remain the signal at the same time.
②󳌤󳌤HDMI input: Connect the HDMI input port to the HDMI output port of your
source equipment such as DVD player or set-top-box.
③Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
3.2 Rear Panel
L/RPC/YPbPr
OUTPUT
① ②
①󳌤󳌤HD-15 D-Sub output: Connect the output port to the PC/YPbPr input of
analog PC monitor, Projector or TV.
②󳌤󳌤L/R: Stereo audio output via 3.5mm phone jack.
2

4. Connection and Installation
HDMI out
DVD or, Set-Top-Box
DVD or, Set-Top-Box
HDMI
HDMI
DVI out
DVI to HDMI adaptor
VGA cable
3.5mm to 2 RCA
audio cable
LCD Monitor/TV Projector
or
HDMI cable
Connection 1(RGB out)
Connection 2 (YPbPr out)
HDMI cable
Audio
D-Sub to 3 RCA cable
YPbPr cable
3
LCD TV
3

5. HDMI Connector Pin Assignment
1
2
19
18
Pin# Function Assignment Pin# Function Assignment
1 TMDS Data2+ 2 TMDS Data2 Shield
3 TMDS Data2- 4 TMDS Data1+
5 TMDS Data1 Shield 6 TMDS Data1-
7 TMDS Data0+ 8 TMDS Data0 Shield
9 TMDS Data0- 10 TMDS Clock+
11 TMDS Clock Shield 12 TMDS Clock-
13 CEC 14 Reserved (N.C. on device)
15 SCL 16 SDA
17 DDC/CEC Ground 18 +5V Power
19 Hot Plug Detect
Output Format
1
67
11 12131415
2345
10 98
B. Analog VGA output pin C. Analog VGA output pin assignment
assignment when output switch when output switch set to YPbPr.
set to RGB.
Part No. Pin No. Description (PC out)
DB15HD
1 RED
2 GREN
3 BLUE
4 GND
5 GND (DDC-RETURN)
6 GND-RED
7 GND-GREEN
8 GND-BLUE
9 N.C
10 GND-SYNC
11 GND
12 DDC-DATA
13 H-SYNC
14 V-SYNC
15 DDC-CLOCK
Part No. Pin No. Description (HD out)
DB15HD
1 Pr
2 Y
3 Pb
4 GND
5 GND (DDC-RETURN)
6 GND-Pr
7 GND-Y
8 GND-Pb
9 N.C
10 GND-SYNC
11 GND
12 DDC-DATA
13 H-SYNC
14 V-SYNC
15 DDC-CLOCK
4

6. Specications
Operation Frequency Up to 225MHz
Input Port 1 x HDMI
Output Ports 1 x HD-15 D-Sub (RGBHV or YPbPr)
1 x Analog L/R 3.5mm phone jack
Output Signal RGB: 0.7Vp-p 75ohm
H/V: 3 to 5 Vp-p
Or Y: 1 Vp-p 75ohm
PB/Pr: 0.7 Vp-p 75ohm
Input/Output Resolution PC: 640x480= VGA59 , VGA60, VGA72, VGA75,
VGA85
800x600= SVGA56, SVGA60, SVGA72,
SVGA75, SVGA85
1024x768= XGA60, XGA70, XGA75, XGA85
1152x864= MAC70, MAC75, MAC85
1280x800= WXGA60
1280x1024= SXGA60, SXGA75, SXGA85,
1440x900= WSXGA60
1600x1200= UXGA60
1680x1050= WSXGA+60
1920x1200= WUXGA60(pixel-rate=154MHz)
HD: 480I60, 576I50, 480P60, 576P50, 720P60,
720P50, 1080I60, 1080I50, 1080P60, 1080P50
HDMI Audio In PCM2
HDMI In Color Space RGB, YUV
Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 76(W) x 30(D) x 92(H)
Weight(g) 172
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0°C ~ 40°C
Power Consumption 2.5W (max)
5

Acronyms A
Acronym Complete Term
6

20080818 MPM-CP1262HE
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.