Czur StarryHub Instruction manual

Thank you for choosing StarryHub, the all-in-one business
conferencing system.
Since this is a new product style in video conferencing indus-
try, we recommend you to go over this instruction before
activating the StarryHub. So you can understand how Starry-
Hub works and enjoy the video meeting experience.
StarryHub Quick User Guide

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for
Waste electrical and electronic equipment ( WEEE ). This means that this
product must be handled pursuant to European directive 2012/19/EU in
order to be recycled or dismantled to minimize its impact on the envi-
ronment.

StarryHub Main Unit
Rear
Front
1
Projector Lens Auto-focus Camera
USB3.0
USB3.0 USB2.0 DC IN
LAN HDMI
HDMI
USB2.0 DC IN
LAN
Camera LED IndicatorCamera

Upper Side
Right
Elevation Bracket, 4°/8° Two-level Adjustment
Power Power LED Indicator
Charging Dock Mic. Array

Power On/Off
2
· Power on
Connect the power source, the power indicator will turn
red.
Then press the power button (for 1 second) until the indi-
cator blinks in blue color.
When the power indicator turns blue (not blinking) and the
screen lights up, StarryHub is ready for use.
* How to activate StarryHub
After installing the StarryHub unit, power on, you can
follow the steps shown on the projection screen to either
register a new StarryHub account or log-in with an existing
account.
This 6-digit StarryHub account number is also used as the
ID of the meetings it launches.
You can also invite this account number to join video meet-
ings launched by other StarryHub accounts.

· Standby
When powered on, press the power button or put the
TouchBoard back to the charging dock to enter Standby
Mode.
Note: If initial setting of the StarryHub is not finished yet,
StarryHub will not enter Standby mode by pressing power
button or putting back TouchBoard to the charging dock.
· Wake up
In Standby Mode, press the power button or pick up the
TouchBoard from the charging position to wake up Starry-
Hub.
If the TouchBoard is not in charging position when in
Standby Mode, move or pick up the TouchBoard will also
wake up the StarryHub.
* It's recommended to keep StarryHub in Standby Mode in
order to receive video meeting invitations.
Only shut down and remove power source if you are not
going to use StarryHub in a long time.
· Power off
When StarryHub is powered on, long-press the power
button for 3 seconds. There will be a pop-up window on
the screen so you can either shut down or reboot with
TouchBoard or WriteBoard (StarryHub accessories).
Or you can long-press the power button for 10 seconds to
shut down directly.

TouchBoard
Front
Back
Charging pinTouchBoard Power on/off
Buzzer
Touch Panel
/ Keyboard V- V+ Signal Source
Back
LED Indicator
Focus Home
on
Off
Touch Panel / Key Board

How to Use the TouchBoard
3
·Pair the TouchBoard with the StarryHub
* TouchBoard and the StarryHub are paired by factory default.
If you need pair them again, please do as follow steps:
Main unit power on TouchBoard power on
❶
❷
Power on StarryHub and the TouchBoard.
on
Off
TouchBoard acts as a wireless controller to the StarryHub.
You can operate StarryHub with the TouchBoard easily.
Before using the TouchBoard, please turn the power button
(on the back of the TouchBoard) to ON status.
Put the TouchBoard back to charging dock (on the top of
StarryHub) after each use.
Long press on the upper left corner for 3 seconds
until the LED indicator blinks in blue color.
on
Off

Tap on Touch/Board to switch input method (touch
panel or keyboard).
· Touch Panel / Keyboard
Tap on V- V+ to adjust volume of the StarryHub.
· Volume adjustment
Paired!
❸Put the TouchBoard back to the charging dock, wait for
10 seconds until the icons on the first row of the Touch-
Board light up. Pairing is completed.

Tap on to focus the projector lens automatically. Long
press to use manual focus.
· Auto-focus
· Switch signal source
Tap on to switch between Starry OS main system,
HDMl, and wireless screen projection signal sources.
· Home
Tap on and back to home page, long press for APP
selector.

In Touch mode , regular operations such as
“Slide”, “Click/Touch with 1 finger”, “Slide with 2
fingers” and “Zoom in & out with 2 fingers” are sup-
ported.
Slide with ONE finger or Double click with ONE finger and
slide :To move object.
Tab with two fingers Call out more options = right-click on
computer mouse.
Slide vertically with three fingers: To switch between APPs.
Slide left/right with three fingers Switch applications.
· Finger touch
Click
One finger slide Slide with two fingers Tab/Press with one finger
· Back
Tap to get back to previous page or previous operation.

In Board mode , keyboard will light up so you can use
the TouchBoard as an input method.
"Low Battery" alert appears with the upper left indicator
light keeps flashing red when Touchboard battery under
20%. Please put the TouchBoard back to the charging dock
(the 3 pins on the top of StarryHub) to recharge.
*Tab Shift + Space bar at the same time to switch key-
board input language.
*[Fn], [OPT], [CMD] can work on Windows and MacOS, but
are NOT available on StarryOS.
* Check the label on the back side of the TouchBoard to see
more finger touch operations.
· Low Battery Status
· Keyboard
Two fingers open/close
Slide left/right with three fingers Slide with ONE finger or Double
click with ONE finger and slide
Tab with two fingers Slide vertically
with three fingers
2

· CZUR Cloud & Cloud File
· CZUR APP
· Scan QR code to download CZUR APP
· StarryMeeting
· Download and Install StarryMeeting application on
your computer.
More Features and Operations
4
StarryHub is designed for office room, with features for local
meeting/presentation, online video meeting, meeting
recording, big screen projection and so much more.
We also offer CZUR Cloud service, supplementary applica-
tions and additional gadgets to make sure you can enjoy the
video meeting experience from different type of terminals.
You would need to register a CZUR account in order to use
CZUR Cloud or these applications.
Use your CZUR account to log in www.czur.cc on a com-
puter.
You can upload or manage Cloud files and sync to Starry-
Hub.
Install CZUR APP from APP store on your mobile phone,
add StarryMeeting Module in the APP.
After log in, you can join video meetings launched by Star-
ryHub from CZUR APP on your phone.
After log in, you can join video meetings launched by Star-
ryHub from StarryMeeting on your computer.

· Wireless Screen Casting
Reminder
5
You can cast screen to StarryHub from various types of
terminals by different types of operations.
-Apple devices: Airplay or Screen Mirroring.
-Android or Windows phones or tablets: Miracast (some of
the models do not support).
-CZUR APP (smart phones): wireless screen casting func-
tion.
-StarryMeeting (computer): wireless screen casting func-
tion.
-ClickDrop: Wireless Screen Casting Gateway (CZUR
gadget).
·Do not remove the power supply when StarryHub is still
on.
Always power off StarryHub before removing power
supply.
·Do not look directly at the camera lens or point the lens
towards human eye when the lens is powered on, to avoid
damage to the eyes caused by strong light.
·Do not obstruct or block the air inlet or outlet of the Starry-
Hub, to avoid affecting the cooling process, which may
cause damage to the electronic components.
·Do not use cloth or paper to wipe all the lenses to avoid
damage to the lenses.
You can use an air blower to remove dust on the lens sur-
face.
Do not touch the lenses regularly.
·Do not use detergent to clean the equipment to avoid cor-
rosion.
·Keep the StarryHub and its accessories out of the reach of
children.
·Please make sure to use the StarryHub in a dry and venti-
lated environment.

1.All warranty terms and after-sales service are following the
local laws and regulations in the territories of the CZUR
authorized sellers.
If there's no specified laws or regulations in this territory,
standard warranty is 12-month from the date of purchase
for all hardware, excluding nature expiration, artificial
damage, unusual breaks and terms listed below in
non-warranty coverage.
2.Non-warranty coverage:
1)Standard working environment temperature should be
within the range of 0~40 degrees Celsius,
2)Failure or damage caused by incorrect installation or use
in non-specified working conditions (excessive tempera-
ture, excessive humidity, etc.),
3)Damage caused by non-official parts or parts replaced by
users without instruction or confirmation from CZUR
support team,
4)Damage caused by disasters, accidents or human fac-
tors,
5)Failure or damage caused by unauthorized disassembly,
repair, modification, or abuse,
6)Damage caused by repairs performed by any none CZUR
authorized parties.
·Do not store the StarryHub and its accessories under
extreme temperature because extreme temperature will
shorten the life of electronic parts.
·Do not put the StarryHub or its accessories into any drying
machines or heating devices.
After-sale Service And Warranty
6
Thank you for choosing StarryHub and supporting CZUR.
Please go over below so you can understand how
after-sales service works and what the warranty terms are.

· CZUR all rights reserved.
Contact Information
7
Reach CZUR team via one of the following ways for sup-
port or share your comments.
Company Name: CZUR TECH CO., LIMITED
Website: www.czur.com
Sales Office: RM722, Block B, Podium of Building No. 12,
Shenzhen Bay Eco-Technology Park, No. 10 Gaoxin South
RD., Nanshan District, Shenzhen, 518063, China.
Office line: 0086-755-23974826
E-mail address: [email protected]
Software Center: Room1001,10th Floor, Block A, No.32A
Huoju Road, High-tech Industrial Zone, Dalian City, Liaoning
Province, China
Factory Address: 6th Floor, Building E, Huihong Industrial
Park,No. 170 Jinxiaotanghuancun Road, Fenggang Town,
Dongguang city, Guangdong province, 523690, China.
The terms HDMI and HDMI High-Definition Multimedia Inter-
face, and the HDMI Logo are trademarks or registered trade-
marks of HDMI Licensing LLC in the United States and other
countries.