Czur M3000 Pro User manual

USER MANUAL (M3000 Pro)

FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
The symbol indicates DC voltage.
RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic
equipment ( WEEE ). This means that this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

1.1 Product Summary .........................................................................................1
1.2 Product Dimensions .....................................................................................2
1.3 Installation Guide ..........................................................................................2
1.4 Product Appearance .....................................................................................3
1.5 Product Specifications ..................................................................................5
1.6 Packaging and Accessories .........................................................................6
2.1 Scanning Preparation ...................................................................................6
2.2 Work Mode ...................................................................................................7
2.2.1 Computer Mode (USB-PC) ...................................................................7
2.2.2 Visual Presenter Mode (USB-PC) ........................................................9
3.1 PC Mode (USB) Problems ............................................................................9
4.1 After Sales Services and Guarantee ...........................................................11
4.2 Contact Information ....................................................................................12
Chapter I Introduction
Chapter II Operation Guidelines
Chapter III Frequently Asked Questions and Troubleshooting
Chapter IV Terms of Service
Contents

1
Chapter I Introduction
1.1 Product Summary
The M3000 Pro is a professional book scanner that is perfect for companies,
industries and professionals, which can be used to quickly scan documents, books,
magazines, files, scrolls, forms, invoices, certificates and business cards.
M3000 Pro is furnished with a central processing unit capable of a million instructions
per second (MIPS CPU), high definition sensors, laser alignment systems, and other
advanced configurations to provide users with crystal clear and brilliantly colored
image(s) and scannings. The scanner supports two work modes the Computer mode
(USB-PC) and Visual Presenter mode (USB-PC), offering both high-end, professional
scanner and visual presenter functions. PC applications, optical character recognition
(OCR) software, and high speed computing are combined to give the definitive high
speed scanning and HD presentation experience.
The M3000 Pro is not only great for scanning flat, single sheets of paper (Flat Single
Page mode), but is also an excellent tool for scanning pages from publications such
as books or magazines (Facing Page mode) and provide you with digital files. M3000
Pro comes with smart image processing algorithms for auto-cropping and tilt
corrections that further enhances scanning results. Transforming curved pages from a
book into finely scanned and corrected images has never been easier when
supported with Flattening Curve, smart paging and finger removal features. These
advantages make M3000 Pro the ground-breaking smart scanner, providing users
with an intelligent and energy-saving scanner solution perfect for any office.

1.2 Product Dimensions
2
Unit: MM
1.3 Installation Guide
Step 1:
Step 2:
Step 3:
Take out the equipment according to the instructions shown in Figure 1, and
align the lamp and camera to the slot provided at the side of the base.
Per Figure 2, tilt the lamp and camera base slightly forward to insert the catch into
the slot, and then press the lamp and camera base down to snap into place.
Lift the device base to tighten the screw at the base.
Figure 1 Figure 2
CZUR TECH CO., LTD.
502.00
422.35
517.00

3
1.4 Product Appearance
Hand button Foot pedal Book cover baffle
Scanner
Connection portsLCD
1
2
3
4
5
6
7
8
9
10
14
11
12
13
155
16
17
23
24
22
21
20
19
18
Side lights touch buttonSide lights port
28 29
Top casing 27
25
26

Descriptions:
1. Laser light
2. Vertical bar
3. Light control button, switching the light between intensity 1, intensity 2, and off.
4. Scan button
5. V-shaped book rest
6. Book rest slider
7. Book rest support
8. Top casing
9. Microphone (MIC)
10. Document base
11. Video / audio recording indicator light
Blinking green light: Video / audio recording in progress.
Green light off: Video / audio recording has been stopped.
12. Scanner indicator light
Red light on: Scanning. Do not flip the page.
Red light off: Image scanned. User may flip the page.
13. Power indicator light. White.
14. Liquid crystal display (LCD)
Computer (USB) mode
• Represents Computer mode (USB-PC)
• X/Y represents images awaiting upload / number of uploaded images (to the PC)
15. High definition CMOS camera
16. 17. LED light. Supports scanning in dimly lit or dark environments.
18. RESET button. For program installation and development purposes.
19. USB Type A port. Connected to a hand button or foot pedal that serves the
same function as the scan button.
20. USB Type B port. Can be connected to the PC.
21. DC port. Connected to an adapter (9V / 2A)
22. Power switch.
23.24 Hand button light; Hand button
NOTE: Red light on: Scanning. Do not flip the page.
Red light off: Image scanned. User may flip the page.
25. 26. Foot pedal cover; Foot pedal base. Place your heel on the floor and gently
tap the pedal with your feet (this method is recommended when scanning books
since it allows you to use both hands for holding and flipping the pages).
27. Book cover baffle. Used to hide book covers to prevent affecting image algorithms.
28. Side lights port
29. Side lights touch button
4
CZUR TECH CO., LTD.

5
Pixel
Resolution
Scanning speed
Format
Video format
Image format
Export format
Processor
DDR
Laser-assisted
LCD screen
Microphone
Side lights
Book rest
Power configurations
Flattening Curve
Smart paging
Smart tilt corrections and auto-cropping
Fingerprints removal from images
Page flip detection and auto-scan
Optical character recognition (OCR)
Software development kit (SDK)
Operating systems supported
20M
5248*3936
≈1.2s
≤A3
MJPG
JPG
PDF/TIFF/WORD/EXCEL/Searchable PDF
32 MIPS CPU
1Gbit
3 laser rays
√
√
√
V-shaped book rest
Input: 100-240V, 50/60Hz;
Output: 9V / 2A
2nd generation laser-assisted distortion
correction
√
√
Available
(with finger cots provided with device)
Available
(detected by PC software)
√
√
XP/Win7/Win8/Win10, 32bit/64bit;
macOS 10.11 and above
Basic
characteristics
Configuration
parameters
Specific
functions
1.5 Product Specifications
Type Model M3000 Pro

1.
2.
3.
6
Chapter II Operation Guidelines
2.1 Scanning Preparation
Plug in the M3000 Pro power adapter and switch ON the device by pressing the
power switch at the rear of the base.
Connect the hand button or foot pedal to the port furnished at the base of M3000
Pro.
When using the Flat Single Page
mode, the V-shaped book rest will
not be required and can be folded up.
The document can be placed in the
center of the black pad.
Item
Upper portion
Base portion
USB cable
Adapter
Side lights
Hand button
Foot pedal
Specialized finger cots
CD-ROM
User manual
Screws
Screw driver
No.
1
2
3
4
5
6
7
8
9
10
11
12
Specification
Upper portion of the device, including the arm and head
Lower portion of the device, including the base
USB interface,1.5M
Input: 100-240V AC; 50/60Hz. 0.6A. Output: 9V / 2A
Magnetic connector
USB interface, 1.2M
USB interface, 2.0M
Left hand, Right hand
CD-R, D = 120 mm
Color printed, 126*178 mm
ф3*8 mm, black
Cross head, chromium-vanadium steel, magnetic
Qty (pcs)
1
1
1
1
1
1
1
2
1
1
6
1
1.6 Packaging and Accessories
CZUR TECH CO., LTD.

5.
4.
7
Check the LCD on the head portion to see if the black area of the V-shaped book
rest covers the entire screen and ensure that the desk surface or random edges are
not included within the scan. You may extend or retract the left and right sides of the
V-shaped book rest to make adjustments. Make sure this step is carried out properly
because it is essential for the smart algorithms. Improper adjustments may lead to
errors in image processing. Prior to adjusting, place a book on the black area. The
equipment will automatically hide areas that appear abnormal.
When using the Facing Pages mode for scanning
curved pages (of books or publications), the
V-shaped book rest can be used. The book rest
can be extended to the left or right according to the
thickness of the book. The book can then be
placed at the center of the book rest.
Special reminders
·
·
·
·
·
·
Avoid scanning documents in places near windows or environments with strong
lighting. Excessively bright ambient lighting will affect the brightness of the M3000
Pro laser lines and negatively affect scanning results.
When scanning books, the 3 laser lines of the scanner must be on the curved
pages. Failure to do so will negatively affect scanning results.
Please wear the specialized finger cots when holding down the pages during the
scanning process to ensure that the finger removal function works properly.
Failure to wear the finger cots would affect the finger removal algorithm.
Do not move the document or flip pages during the scanning / image collection
process to prevent affecting the scanning results. Do not move the document or
flip the pages when the red scanner indicator light is ON as image scanning is in
progress. Once image scanning is complete, the red indicator light will switch
OFF and you may move the document or flip the pages at that time.
Switch on the M3000 Pro supplemental light to remove the shadow of the
scanner’s head portion.
When scanning magazines, coated paper, and other reflective materials, switch
the side lights ON and switch the main lights OFF for best effects.

8
·
·
·
Visit the official website (http://www.czur.com ) and click on the Support tab, select the
appropriate scanner model and download the CZUR Scanner software and install it
on the computer. Windows users may also directly install the software from the
CD-ROM. Windows will also detect the software version and initiate updates when
required. MacOS users should download the software from the official website.
Make sure that M3000 Pro is prepared for scanning. Connect the scanner to the
computer using the USB cable provided.
Open the CZUR Scanner software and select the Scanner function. Click on Scan
on the upper left corner to enter the scan interface. From the right side, select the
color mode and paper processing modes and click on the icon to begin scanning.
Make sure the correct paper processing mode is selected. Incorrect paper processing
modes will negatively affect the scanning results.
For more details on software functions, visit the Support tab（http://www.czur.com →
Support）, select the appropriate model number, and click on the CZUR Scanner
video instruction to open and read it.
2.2.1 Computer Mode (USB-PC)
Plug in power adapter, and connect device with computer via USB cable. Then connect
computer to projector.
2.2.2 Visual Presenter Mode (USB-PC)
2.2 Work Mode
CZUR TECH CO., LTD.

9
Chapter III Frequently Asked Questions and Troubleshooting
·
Possible faulty power connection. Make sure the power supply actually has power, the
adapter is properly connected, and the power switch is turned to On.
Sticky on/off switch. Turn the on/off switch on and off a few times.
·
·
·
– The software cannot be installed.
The software will only work on a Windows XP,7, 8, or 10 System and some macOS
system. Or you may have entered the wrong scanner SN. Check the scanner SN
underneath the base. Note that there is no number 1 (one) in the SN.
Anti-virus software may be interfering. Lower your anti-virus or firewall’ s security level
or disengage it while installing the CZUR software. Then reengage it.
Faulty software download. Download the software again & make sure it completely
downloads before trying to install it.
·
– When first using the software, nothing shows in the preview frame, and I am unable to
scan.
– SN errors.
The scanner’ s SN is underneath the base. Note that there is no number 1 (one) in
the SN.
·
– Unable to turn the scanner on. The LCD screen and power indicator light are dark.
3.1 PC Mode (USB) Problems

10
CZUR TECH CO., LTD.
·
– The scanned image exhibits distorted or warped images or stretched texts.
·Check the LCD on the head portion to see if the black area of the V-shaped book rest
covers the entire screen and ensure that the desk surface or random edges are not
included within the scan.
The Scan Medium may not exceed the Preview Area. The Scan Medium refers to
documents, books, files, forms, invoices, personal identification, and business cards.
Check if the Preview Area includes items other than the Scan Medium. These items will
interfere with the algorithm and affect scanning results. Examples of these items
include the hand button, USB cable, cell phones, pens, and other stationery.
·
– Scanned images are distorted, the font is twisted, or there are other distortions.
What you want to scan may be too big. It must fit within the boundaries of the matte
black pad.
There might be interfering items in the preview area. Make sure none of the following
are there: your hand, the Hand Button’ s cord, your mobile phone, a pen, etc. Only the
document to be scanned should be in the scanning preview area to allow the
algorithms to work properly.
·
·
Make sure all USB connections are firm, especially between the scanner and the PC.
Make sure the PC’ s “Device Manager” recognize the scanner. If you see a yellow
exclamation mark with an “Unknown Device” indication, right click it to update the drive
or disable and then re-enable device, and then retry the software.
Enter "device manager" , then disable the other "scanner" "camera" driver.
Try restarting the PC or using a different one.
·
·
·
·

11
Chapter IV Terms of Service
4.1 After Sales Services and Guarantee
Dear user, thank you for using the smart scanner manufactured by our company. To
protect your legal rights, please peruse and comply with the following standards and
reminders.
·
·
·
·
·
·
All after sales policy of this product shall be subject to the laws and regulations of the
country of sales.
The scope of warranty covers the M3000 Pro device, the adapter, the hand button,
and the foot pedal. Consumables and external appearances are not covered by the
warranty.
When sending in the product for repairs, please contact us or our local agent.
We apologize for not issuing notices for subsequent upgrades or version updates of
the product. This Company reserves the right of final decision on the interpretation of
the above articles.
·
·
This product may only be used in areas where surrounding temperature is less than
40 oC.
Failures or damages caused by incorrect installation or using the product in
environments that exceed the specified work conditions (for examples, in places that
are too hot or too humid).
Damages caused by using components not from this Company or when the user
attempts to replace components by himself / herself.
Damages caused by natural disasters, accidents, or human factors.
Warranty scope exceptions

12
·
·
·
·
4.2 Contact Information
Get technical support and information by following ways.
CZUR TECH CO., LTD.
Website: http://www.czur.com/
E-mail: [e-mail]
Skype: [e-mail]
Room 1701, Oriental Science and Technology Building, No.16, Keyuan Road, Nanshan
District, Shenzhen, China.
Room 911, Building A, Chuangye Mansion, 32th Huoju Road, High-tech District, Dalian, China.
Damages caused by inappropriate storage (including damages caused by rats or
liquid infiltration).
Failures or damages caused by unauthorized repairs, modifications, or abuse carried
out by the user.
Damages caused by repairs carried out by unauthorized repair centers.
Other errors and failures caused by software installation or software settings, or
problems and failures caused by computer viruses.
CZUR TECH CO., LTD.

CZUR TECH CO., LTD.
Website: http://www.czur.com
E-mail: [e-mail]
Skype: [e-mail]
Room 1701, Oriental Science and Technology Building, No.16, Keyuan
Road, Nanshan District, Shenzhen, China.