D-Link DPE-101GI User manual

This document will guide you through the basic installation
process for your new D-Link PoE Injector.
DPE-101GI
Quick Installation Guide
1-Port Gigabit PoE Injector
Documentation also available on
CD and via the D-Link Website

2D-Link DPE-101GI Quick Install Guide
Package Contents
• DPE-101GI Gigabit PoE Injector
• Power Cord
• Power Adapter
If any of these items are missing from your packaging, contact your reseller.
Warning: Please check the maximun power consumption of your PoE
device before connecting to DPE-101GI. Devices that require more than 16
watts may cause damage to the DPE-101GI.
This Adapter provides both data and power to Ethernet-enabled devices
using a single Ethernet cable, eliminating the need to place those devices
near power outlets.
The DPE-101GI simplifies your installation of Ethernet-enabled devices,
such as an Internet camera or wireless access points, by allowing you to
place it beyond the range of standard power outlets. You can now mount
these devices to a ceiling or outside without placing them near a power
supply.
Introduction

3
D-Link DPE-101GI Quick Install Guide
Installation
PoE Access Point
PoE Device
PoE IP Camera
OR
Computer
Data in
Power +
data out
Router
OR
Switch
Step 2: Connect an Ethernet cable into the Data In port on the DPE-101GI
and the other end into an Ethernet device.
Step 3: Connect an Ethernet cable into the Power + Data Out port on the
DPE-101GI and the other end into a powered (PoE) device.
Step 4: Installation is complete.
Step 1: Connect the Power Adapter to the power receptor on the
DPE-101GI. Connect the Power Cord to the Power Adapter and
then plug the power cord to a power outlet or surge protector.
Power Cord Power Adapter

D-Link DPE-101GI Quick Install Guide
Troubleshooting
1. My PoE device will not power on or the connection is unstable even though power is being
supplied to the DPE-101GI.
• DPE-101GI supports up to 19.2 watts to a powered device, however, the quality and length
of the Ethernet cable may impact the reception of the PoE power. Generally speaking, with
standard CAT5e cable, the DPE-101GI can provide 16 watts for distances up to 100 meters.
• DPE-101GI supplies power via pins 4, 5, 7, 8. Some legacy cables have only 4 pins 1, 2, 3, 6
that cannot deliver PoE power.
• Some PoE devices have multiple LAN ports, and not all LAN ports support PoE function.
Please ensure that the device is connected to the correct port.
2. My PoE device does not have a gigabit PoE port. Can the DPE-101GI supply power to my
device?
• Yes, both the Data Port and P+Data Port on the DPE-101GI comply with the IEEE802.3/
3u/3ab standards and support 10/100/1000 auto-speed negotiation.
Technical Support
Having trouble installing your new product? D-Link’s website contains the latest user documentation
and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical
Support through our website or by phone.
United States
Telephone: [phone]
Internet: http://support.dlink.com
Canada
Telephone: [phone]
Internet: http://support.dlink.ca
Copyright ©2011 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation
or its subsidiaries. Other trademarks are the property of their respective owners. Product specications, size and
shape are subject to change without notice, and actual product appearance may dier from that depicted on
the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.0
September 16, 2011
6DPE101GIQ01G