D-Link DI-804 User manual

DI-804
Broadband Router
Quick Install GuideQuick Install Guide
11 Connecting the DI-804 Broadband RouterConnecting the DI-804 Broadband Router
to your networkto your network
When you have completed the steps in this installation guide, your connected
network may look someting like this:
DI-804..03.08.01
First,
Plug in the power supply as shown.
The Power LED will turn on
to indicate proper operation.
Internet
Cable/DSL
Modem
DFE-530TX+
Analog Modem
DI-804
DFE-670TXD
LAN ports WAN port

11
22
Connecting the DI-804 Broadband RouterConnecting the DI-804 Broadband Router
to your networkto your network continuedcontinued
Installing the DI-804 using the SetupInstalling the DI-804 using the Setup
WizardWizard
Checking the IP Address of the computer being
used to configure the DI-804 Broadband Router
Next, connect the WAN port to the
Cable/DSL modem. The WAN LED
will indicate connection.
Finally, connect the computer to one
of the LAN ports on the DI-804.
Go to Start>Run
Type in “WINIPCFG”.
The IP address of the computer must
be between 192.168.0.2 and
192.168.0.254 in order to configure
the router.
Note: If you are manually assigning a
static IP, please refer to Appendix A.
Click on the “Release All” and then
on the “Renew All” button to obtain
an IP address from the broadband
router between 192.168.0.100. and
192.168.0.199.

22 Installing the DI-804 using the SetupInstalling the DI-804 using the Setup
WizardWizard continuedcontinued
Open the web browser, and type
192.168.0.1 into the URL address box.
Note: Please disable any proxy server
setting for the web browser.
Click on “Start the Setup Wizard”
at the bottom of the Main Menu.
When the login screen appears, type
“admin” in the User Name box, and
leave the Password field blank.
Click OK.
At this window, select the local time
zone.
Click Next, to continue.

22 Installing the DI-804 using the SetupInstalling the DI-804 using the Setup
WizardWizard continuedcontinued
DSL users:
If you are using a PPPoE client to
connect to your DSL provider,
then place a checkmark on the first
box, and enter the user name and
password in the appropriate box.
Cable modem users:
If you are using a cable modem,
then place a checkmark on the sec-
ond box and enter the host and
domain name given by your cable
provider.
Click Next.
By default, the WAN port is set to
automatically obtain an IP address
from the ISP.
To assign a static IP for the WAN
port, remove the checkmark and
enter the settings.
Click Next.
The default IP address of the LAN
port is set to 192.168.0.1.
Click Next to accept the default set-
tings.

22
Installing the DI-804 using the SetupInstalling the DI-804 using the Setup
WizardWizard continuedcontinued
If you are using a backup dial-up
modem with the broadband router,
place a checkmark in the box and
enter the settings for the dial-up
connection.
Click Next.
At this window,
Click “Save and Restart,” to fin-
ish the Setup Wizard.
After the DI-804 has restarted, the
installation is complete!

33 Checking the connection to the InternetChecking the connection to the Internet
To check the connection, open
the web browser and go to your
favorite website.
If you are unable to browse,
please do the following:
1. Refer to Appendix B to
check your connection to the
wireless router.
2. Use “Help” on the Main
Menu.
3. Refer to the troubleshooting
section in the user’s manual.

If the network adapter is unable to obtain an
IP address automatically from the Broadband
Router,
then go to START>SETTINGS>CONTROL
PANEL>NETWORK
then highlight “TCP/IP” and
Click on “Properties.”
Select the “Gateway” tab and enter the
Gateway IP Address of 192.168.0.1
Next, select the “IP Address” tab, and
Click on “Specify an IP Address.”
Assigning a Static IP Address
AA

Use “Ping” to check your network
connections.
Go to START>RUN
Type “command” in the box.
Click OK.
Type “ping 192.168.0.1”, which is
the IP address of the LAN port of the
Broadband Router.
Hit the “Enter” key.
A successful connection will show
four replies, as shown at left.
Checking Your Network Connections
BBAPPENDIXAPPENDIX