D-Link DSL-G2452GR-5G User manual

Quick Installation Guide
DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band VDSL2 Rou er
wi h ADSL2+/3G/LTE/Gigabi E herne WAN Suppor ,
2 FXS Por s and USB Por

DSL-G2452GR Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DSL-G2452GR
•Power adapter DC 12V/1.5A
•RJ-11 telephone ca le
•Ethernet ca le
•Splitter
•“Quick Installation Guide” ( rochure).
If any of the items are missing, please contact your reseller.
The “User Manual” and “Quick Installation Guide” documents are availa le
on D-Link we site (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2

DSL-G2452GR Quick Installation Guide
Default Settings
Do ain na e of device dlinkrouter.local.
IP address of device 192.168.1.1
Userna e (login) admin
Password admin
Na e of wireless network
(SSID)
2.4GHz DSL-G2452GR
5GHz DSL-G2452GR-5G
Network key (PSK password)
see WPS PIN on the arcode
la el on the ack panel of
the device
!
Router DSL-G2452GR with default settings cannot connect to the
Internet. To get started, please set your own password for access to the
we - ased interface and change the WLAN name (SSID); then, if
needed, configure other settings recommended y your ISP.
3

DSL-G2452GR Quick Installation Guide
System Requirements and Equipment
•An Android or iPhone mo ile device (smartphone or ta let) or a computer
with any operating system that supports a we rowser.
•A PC we rowser to access the we - ased interface:
◦Apple Safari 8 and later
◦Google Chrome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, , g, n, or ac Wi-Fi adapter to create a wireless network.
•Analog phone.
•A USB modem (when it is necessary to connect to the Internet via mo ile
operators' networks).1
!
Your USB modem should e equipped with an active SIM card of your
operator.
Some operators require su scri ers to activate their USB modems prior
to using them. Please, refer to connection guidelines provided y your
operator when concluding the agreement or placed on its we site.
For some models of USB modems, it is required to disa le the PIN
code check on the SIM card prior to connecting the USB modem to the
router.
1 Contact your operator to get information on the service coverage and fees.
4

DSL-G2452GR Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet ca le etween any of LAN ports located on the ack
panel of the router and the Ethernet port of your PC.
2. To connect via USB modem: connect your USB modem to the USB port2
located on the right side panel of the router.
!In some cases you will need to re oot the router after connection of the
USB modem.
3. To connect the device to a DSL line: connect a phone ca le etween the
DSL port of the router and the MODEM port of the splitter. Connect your
phone to the PHONE port of the splitter. Then connect another phone
ca le etween a phone jack and the L NE port of the splitter.
4. To connect the device to an Ethernet line: connect an Ethernet ca le
etween the WAN port of the router and the Ethernet line.
5. Connect another phone ca le etween an FXS port of the router and the
phone.
6. Connect the power cord to the power connector port on the ack panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
7. Turn on the router y pressing the power utton on its right side panel.
Then make sure that your PC is configured to o tain an IP address
automatically (as DHCP client).
2 It is recommended to use a USB extension ca le to connect a USB modem to the
router.
5

DSL-G2452GR Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. Click the Start utton and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking ta , select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties utton.
6

DSL-G2452GR Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio uttons are
selected. Click the OK utton.
7. Click the OK utton in the connection properties window.
7

DSL-G2452GR Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 10)
1. Click the Start utton and proceed to the Settings window.
2. Select the Network & Internet section.
3. In the Change your network settings section, select the Change
adapter options line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking ta , select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties utton.
8

DSL-G2452GR Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio uttons are
selected. Click the OK utton.
7. Click the Close utton in the connection properties window.
9

DSL-G2452GR Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect via USB modem: connect your USB modem to the USB port3
located on the right side panel of the router.
!In some cases you will need to re oot the router after connection of the
USB modem.
2. To connect the device to a DSL line: connect a phone ca le etween the
DSL port of the router and the MODEM port of the splitter. Connect your
phone to the PHONE port of the splitter. Then connect another phone
ca le etween a phone jack and the L NE port of the splitter.
3. To connect the device to an Ethernet line: connect an Ethernet ca le
etween the WAN port of the router and the Ethernet line.
4. Connect another phone ca le etween an FXS port of the router and the
phone.
5. Connect the power cord to the power connector port on the ack panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
6. Turn on the router y pressing the power utton on its right side panel.
7. Make sure that the Wi-Fi adapter of your PC is on. As a rule, modern
note ooks with uilt-in wireless NICs are equipped with a utton or
switch that turns on/off the wireless adapter (refer to your PC documents).
If your PC is equipped with a plugga le wireless NIC, install the software
provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to o tain an IP address
automatically (as DHCP client).
3 It is recommended to use a USB extension ca le to connect a USB modem to the
router.
10

DSL-G2452GR Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 7)
1. Click the Start utton and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then select
the Properties line in the menu displayed.
5. In the Wireless Network Connection Properties window, on the
Networking ta , select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties utton.
11

DSL-G2452GR Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio uttons are
selected. Click the OK utton.
7. Click the OK utton in the connection properties window.
8. To open the list of availa le wireless networks, select the icon of the
wireless network connection and click the Connect To utton or left-
click the network icon in the notification area located on the right side of
the task ar.
12

DSL-G2452GR Quick Installation Guide
9. In the opened window, in the list of availa le wireless networks, select the
wireless network DSL-G2452GR (for operating in the 2.4GHz and) or
DSL-G2452GR-5G (for operating in the 5GHz and) and click the
Connect utton.
10. In the opened window, enter the network key (see WPS PIN on the
arcode la el on the ack panel of the device) in the Security key field
and click the OK utton.
11. Wait for a out 20-30 seconds. After the connection is esta lished, the
network icon will e displayed as the signal level scale.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
13

DSL-G2452GR Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 10)
1. Click the Start utton and proceed to the Settings window.
2. Select the Network & Internet section.
3. In the Change your network settings section, select the Change
adapter options line.
4. In the opened window, right-click the relevant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then select
the Properties line in the menu displayed.
5. In the Wireless Network Connection Properties window, on the
Networking ta , select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties utton.
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio uttons are
selected. Click the OK utton.
7. Click the Close utton in the connection properties window.
14

DSL-G2452GR Quick Installation Guide
8. To open the list of availa le wireless networks, select the icon of the
wireless network connection and click the Connect To utton or left-
click the network icon in the notification area located on the right side of
the task ar.
9. In the opened window, in the list of availa le wireless networks, select the
wireless network DSL-G2452GR (for operating in the 2.4GHz and) or
DSL-G2452GR-5G (for operating in the 5GHz and) and click the
Connect utton.
10. In the opened window, enter the network key (see WPS PIN on the
arcode la el on the ack panel of the device) in the Security key field
and click the Next utton.
11. Allow or for id your PC to e discovera le y other devices on this
network (Yes / No).
15

DSL-G2452GR Quick Installation Guide
12. Wait for a out 20-30 seconds. After the connection is esta lished, the
network icon will e displayed as a dot with curved lines indicating the
signal level.
!
If you perform initial configuration of the router via Wi-Fi connection,
note that immediately after changing the wireless default settings of the
router you will need to reconfigure the wireless connection using the
newly specified settings.
16

DSL-G2452GR Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based nterface
Start a we rowser. In the address ar of the we rowser, enter the domain
name of the router ( y default, dlinkrouter.local) with a dot at the end
and press the Enter key. Also you can enter the IP address of the device ( y
default, 192.168.1.1).
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
the we - ased interface of the router, make sure that you have properly
connected the router to your computer.
If the device has not een configured previously or the default settings have
een restored, after access to the we - ased interface the Initial Configuration
Wizard opens (see the Initial Confi uration Wizard section, page 21).
17

DSL-G2452GR Quick Installation Guide
If you configured the device previously, after access to the we - ased interface
the login page opens. Enter the username (admin) in the Userna e field
and the password you specified in the Password field, then click the LOGIN
utton.
In order not to log out, move the Stay signed in switch to the right. After
closing the we rowser or re ooting the device, you need to enter the
username and the password again.
If you enter a wrong password several times, the we - ased interface will e
locked for a while. Please wait for one minute and reenter the password you
specified.
18

DSL-G2452GR Quick Installation Guide
The Su ary page displays general information on the router and its
software.
19

DSL-G2452GR Quick Installation Guide
The Ho e page displays links to the most frequently used pages with device's
settings.
The we - ased interface of the router is multilingual. You can select the
needed language upon the initial configuration of the we - ased interface of
the router or in the Syste / Configuration section of the menu.
Other settings of the router are availa le in the menu in the left part of the
page. Go to the relevant section and select the needed page or run the wizard
in the Initial Configuration section.
20