D-Link R15 User manual

• R15 || AX1500 Smart Router
• Power Adapter
• Ethernet Cable
• Quick Installation Guide
Quick Installation Guide
R15
AX1500 Smart Router
Plug the router into a power source. Wait for the Power LED to turn solid white.
1 /
Download the EAGLE PRO AI app and launch it.
2 /
Tap Install New Device. Scan the Setup code. Follow the on-screen instructions to
complete the setup.
3 /
You’re all good to go! Connect devices to your network using the Wi-Fi Name(SSID) and
Wi-Fi Password that you created during the setup process. Enjoy the Internet!
This is a backup of your device’s Setup
Code. Please keep it as future reference
for your device.
Setup Code
Installation
What's in the Box
EAGLE PRO AI

2021/07/01_90x130 v1.01(US) 4GIDIRX15DLUS2XX
Why can’t I access the web-based conguration utility?
Verify that http://WXYZ.devicesetup.net/ has been correctly entered into
the browser (WXYZ represents the last 4 characters of the MAC address). The
Wi-Fi Name(SSID), Wi-Fi Password, and device password are printed on the
Quick Installation Guide and on the device label.
Why can’t I access the Internet?
Power cycle your router and check your Internet access again. If you still can
not connect to the Internet, contact your Internet service provider.
What do I do if I forgot my device password or my Wi-Fi Password?
If you forgot your password, you must reset your router. This process will change
all your settings back to the factory defaults.
How do I restore the router to its factory default settings?
Locate the reset button. With the router powered on, use a paper clip to hold
the button down until the LED turns solid red. Release the button and the
router will go through its reboot process.
This D-Link product includes software code developed by third parties, including software
code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License
(“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access
to the GPL code and LGPL code used in this product, are available to view the full GPL Code
Statement at:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY
and is subject to the copyrights of one or more authors. For details, see the GPL code and
the LGPL code for this product and the terms of the GPL and LGPL.
Written Oer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software, D-Link will
provide upon written request via email and/or traditional paper mail the applicable GPL and
LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as
allowed under the GPL and LGPL.
Please direct all inquiries to:
Snail Mail: Email:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
14420 Myford Road, Suite 100
Irvine, CA 92606
GPL[email protected]
GPL Code Statement
FAQ
FCC Warning Technical Support
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) The device may not cause harmful interface, and
(2) this device must accept any interface received, including interface that may
cause undesired operation.
Having trouble installing your new product? D-Link’s website
contains the latest user documentation and software updates
for D-Link products. Customers can contact D-Link Technical
Support through our website by choosing the relevant region.
United States
Website: http://support.dlink.com
Telephone: [phone]
Canada
Website: http://support.dlink.ca
Telephone: [phone]