D-Link DCS-4622 User manual

This document will guide you through the
basic installation process for your new
D-Link Network Camera.
DCS-4622
Documentation also available on
CD and via the D-Link Website
Quick Installation Guide
Vigilance 360° Full HD PoE Network Camera
Quick Installation Guide
Installationsanleitung
Guide d’installation
Guía de instalación
Guida di Installazione
Краткое руководство по установке
Guia de Instalação Rápida
快速安裝指南
Petunjuk Pemasangan Cepat

D-Link DCS-4622 Quick Installation Guide 1
ENGLISH
Quick Installation Guide
This installation guide provides basic instructions for installing the DCS-4622.
For additional information about how to use the camera, please see the User
Manual which is available on the CD included in this package or from the
D-Link support website.
Package Contents
DCS-4622 Vigilance 360° Full HD PoE Network Camera
Mounting Kit
Manual and Software on CD-ROM
Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Safety Notice:
Installation and servicing should be done by certified technicians so as to
conform to all local codes and prevent voiding your warranty.

D-Link DCS-4622 Quick Installation Guide
2
ENGLISH
Hardware Overview
12
13
14
9
4
5
3
6 7
8
10
2
11
1

D-Link DCS-4622 Quick Installation Guide 3
ENGLISH
1Speaker
(on back) Onboard speaker for 2-way communication.
2IR LEDs
(behind cover) Provide illumination for low-light environments.
3 Camera Lens Fixed lens to record video of the surrounding area.
4 Light Sensor
The light sensor measures the lighting conditions
and switches between color and infrared
accordingly.
5Power/Status
LED
Red: Camera is on, but not connected to the network
Green: Camera is on and is connected to the network
Flashing Green: Camera is currently streaming video
6 Microphone Records audio from the surrounding area.
7microSD Card
Slot
You can insert a microSD card to save snapshots
and video to it.
8Camera
Mount
Remove the camera from the camera mount by turning
the camera counter-clockwise. Lock the camera in the
camera mount by turning the camera clockwise.
9
Tilt
Adjustment
Screw
Can be loosened to adjust camera angle, or
removed when separating the camera cover from
the mounting plate.
10 Mounting
Plate
Use the holes on the mounting plate to mount the
camera to a ceiling or wall.
11 Cable
Channels
The camera cable can be passed through the cable
channels or the center of the camera mount when
mounting it.
12 Power
Connector
Connects to an optional 12 V / 1.5 A power adapter
(not included).
13 Ethernet Jack RJ-45 connector for Ethernet to connect the camera
to your network.
14 Reset Button Press and hold for 10 seconds to reset camera back
to the factory default settings.

D-Link DCS-4622 Quick Installation Guide
4
ENGLISH
Conguring the Camera
Insert the DCS-4622 CD into your computer's CD-ROM drive to begin the
installation. If Autorun is disabled, or if the D-Link Launcher fails to start
automatically, click the Start button and type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and press Enter.
Click on the D-Link Setup Wizard SE icon that
was created in your Windows Start menu (Start >
D-Link > Setup Wizard SE).
The Setup Wizard will appear and display the
MAC address and IP address of your camera(s).
If you have a DHCP server on your network, a
valid IP Address will be displayed. Otherwise, the
network camera's default static IP 192.168.0.20 will
be displayed. Select your camera, then click the
Wizard button to continue.
Click Setup Wizard and follow the instructions to
install the Setup Wizard.
Enter the Admin ID and password. When logging in
for the first time, the default Admin ID is admin with
the password left blank.
Click the checkboxes if you wish to change the
admin ID and password for the camera, and enter
the new ID and password you wish to use.
Click Next to continue.
Select DHCP if your camera obtains an IP address
automatically from a DHCP server such as a router.
Select Static IP if you want to manually enter the IP
settings for the camera.
Click Next to continue.

D-Link DCS-4622 Quick Installation Guide 5
ENGLISH
Viewing Your Camera via Web Browser
Click on the D-Link Setup Wizard SE icon that
was created in your Windows Start menu (Start >
D-Link > Setup Wizard SE).
Select the camera and click Link to access the web
configuration.
The Setup Wizard will automatically open your web
browser to the IP address of the camera.
Enter admin as the default username and leave the
password blank. Click OK to continue.
Take a moment to confirm your settings and click
Restart.
This section displays your camera’s live video. You
can select your video profile and view or operate
the camera. For additional information about web
configuration, please refer to the user manual,
which is available on the D-Link website.

D-Link DCS-4622 Quick Installation Guide
6
ENGLISH
Mounting Instructions
It is highly recommended that you configure and test your camera before
mounting it.
Connect the power and Ethernet cables, or just the
Ethernet cable if you are using a PoE connection.
Place the mounting plate where you want to
position the camera and use a pencil to mark the
two mounting holes.
If you wish to run the camera cables through
the wall or ceiling, mark the center hole as well.
Use a screwdriver to unscrew the tilt adjustment
screw. Pull the mounting plate away from the
camera mount.
Use a 6 mm drill bit to make the required holes
approximately 25 mm deep, then insert the wall
anchors into the holes. Use the screws provided to
attach the mounting bracket to the wall.
If you wish to run the camera cables through
the wall or ceiling, drill the center hole for the
camera cables to pass through.

D-Link DCS-4622 Quick Installation Guide 7
ENGLISH
Additional Information
Additional help and product information is available
online at http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty
information for your region.
Attach the camera mount to the mounting plate.
If you are running the camera cables out the
side of the camera, guide the camera cables
through the cable channel on the camera mount.
Adjust the angle of the camera, then screw
in the tilt adjustment screw until it is snug.
If you wish to insert a microSD card, remove
the camera from the camera mount by turning the
camera counter-clockwise and lifting it away from
the camera mount.
Insert the microSD card with the contacts facing
you.
Reattach the camera to the camera mount and turn
it clockwise to lock it in place.
If you wish to run the camera cables through
the wall or ceiling, pull the cables through the
hole.

D-Link DCS-4622 Quick Installation Guide
8
8
DEUTSCH
Installationsanleitung
Diese Installationsanleitung bietet Ihnen grundlegende Anleitungen zur
Installation der DCS-4622. Zusätzliche Informationen zur Verwendung der
Kamera finden Sie im Benutzerhandbuch, das Ihnen auf der CD, die diesem
Paket beiliegt, oder über die D-Link Support-Website zur Verfügung steht.
Packungsinhalt
DCS-4622 Vigilance 360° Full HD PoE Network Camera
Montageset
CD-ROM mit Software und Handbuch
Installationsanleitung
Sollte einer der oben aufgeführten Artikel fehlen, so wenden Sie sich bitte an
Ihren Fachhändler.
Sicherheitshinweis:
Installation und Wartungsarbeiten sollten nur von zertifizierten Technikern
vorgenommen werden, zu jeder Zeit allen örtlich geltenden Richtlinien und
Anforderungen entsprechen sowie verhindern, dass Ihr Garantieanspruch
erlischt.