D-Link DCS-8620LH User manual

DCS-8620LH
User Manual
2K QHD Outdoor Wi-Fi Camera
Hardware: A1
Manual Version: 1.01
03/25/2022

iD-Link DCS-8620LH User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes. Information in this document may become obsolete as our services
and websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Manual Overview
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks
of their respective companies.
Copyright © 2021, 2022 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from
D-Link Corporation, Inc.
Manual Revisions
Revision Date Description
1.01 03/25/2022 Initial release

iiD-Link DCS-8620LH User Manual
Table of Contents
Table of Contents
Product Overview..............................................................1
Package Contents.........................................................................1
Introduction ................................................................................... 2
System Requirements.................................................................2
Hardware Overview.....................................................................3
Front .......................................................................................... 3
Bottom...................................................................................... 4
LED Behavior ..........................................................................5
Installation.........................................................................6
Safety ................................................................................................6
Before You Begin...........................................................................6
Wireless Installation Considerations...................................... 7
mydlink App Camera Setup...................................................... 8
Device Placement.......................................................................10
Mounting the Camera...............................................................11
Pole Mount............................................................................11
Wall/ Ceiling Mount ...........................................................12
Using the mydlink App....................................................14
Controlling Your Device ...........................................................14
Device Settings............................................................................15
Troubleshooting..............................................................17
Technical Specications..................................................18
Regulatory Information ..................................................20

1D-Link DCS-8620LH User Manual
Section 1 - Product Overview
Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a dierent voltage rating than the one included with your product will cause damage and void
the warranty for this product.
2K QHD Outdoor Wi-Fi Camera
Mounting Screws Quick Installation Guide
Power Adapter
Cable Ties

2D-Link DCS-8620LH User Manual
Section 1 - Product Overview
Introduction
The DCS-8620LH is equipped with IP65 protection for outdoor usage and IR night vision for day and night surveillance.
Compliant with ONVIF prole S and T, the DCS-8620LH is capable of capturing images at up to 25 frames per second in
Quad HD resolution along with the support for H.264 and H.265 codecs. The AI-capable person detection noties you only
when humans appear in the camera view, signicantly reducing false detection. For ease of management, the wireless
802.11ac and Bluetooth 5.0 connectivity allow you to access the live view and congure the camera through your mobile
device. It also allows you to receive alert notications of motion, sound, vehicle, and glass break sound detection with the
mydlink app.
System Requirements
Network Requirements
• 802.11n/ac wireless network
• An Internet connection
• A router connected to your broadband modem
mydlink™ App Requirements
• iPhone®, iPad®, Android™ smartphone or tablet (please refer to the
mobile app's store page to check whether your device is compatible)
• Email account (for mydlink™ service registration)

3D-Link DCS-8620LH User Manual
Section 1 - Product Overview
Hardware Overview
Front
Status LED Refer to LED Behavior on page 5for more information.
Microphone Picks up sound near your camera.
Light Sensor The IR-Cut removable lter switches between color and infrared according to the
lighting conditions monitored by the sensor.
Camera Lens Records video of the surrounding area.
Built-In Microphone
Status LED
Light Sensor
2K QHD 1440p Resolution
Lens with 127° FOV

4D-Link DCS-8620LH User Manual
Section 1 - Product Overview
Bottom
Speaker Transmits sound for the two-way audio feature.
microSD Card Slot microSD card slot, supports up to 256 GB.
Reset Button Hold the recessed button down until the Status LED turns red to reset the camera to
factory default settings.
Speaker
microSD Card Slot Reset Button

5D-Link DCS-8620LH User Manual
Section 1 - Product Overview
LED Behavior
Status LED
Connected to Wi-Fi and mydlink.
Powering on.
Ready for conguration.
Upgrading rmware - do not power o.
Timeout for setup - please power cycle the device.
Status LED

6D-Link DCS-8620LH User Manual
Section 2 - Installation
Please read all of the safety and operating instructions before using device:
• Do not open the device or attempt to repair it.
• Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it
from the power outlet and use a damp towel to gently wipe it down.
Before You Begin
Plan the location of your camera:
• Verify that your camera is electrically rated to operate with the power available in your location.
• Connect the camera's power adapter into an electrical outlet that is not controlled by a wall switch. This will help avoid
accidentally turning o power to the device.
• Be sure to plug the device into a properly grounded electrical outlet in order to help prevent against electrical shock.
• Make sure that the device is rmly mounted.
Installation
Safety

7D-Link DCS-8620LH User Manual
Section 2 - Installation
Wireless Installation Considerations
The DCS-8620LH 2K QHD Outdoor Wi-Fi Camera lets you view video footage from virtually anywhere within the operating
range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that
the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these
basic guidelines:
1. Keep the number of walls and ceilings between the camera and wireless access point to a minimum - each wall or ceiling
can reduce your camera’s range from 1 to 30 meters (3 to 90 feet). Position your devices so that the number of walls or
ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 0.5 meters (1.5 feet) thick, at a 45-degree angle
appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it looks over 14 meters (42 feet) thick! Position devices so
that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try
to position access points, wireless routers, and cameras so that the signal passes through drywall or open doorways.
Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and
concrete will degrade your wireless signal.
4. Keep your product away at least 1 to 2 meters (3 to 6 feet) from electrical devices or appliances that generate RF noise.

8D-Link DCS-8620LH User Manual
Section 2 - Installation
mydlink App Camera Setup
Launch the mydlink app and create a new account or sign in to your
existing account.
Note: If you are asked about allowing the app to access your location or to send
notications, select Allow. Make sure location services and Bluetooth are turned
on in your phone’s settings.
2/
Download the mydlink app from the App Store (iOS) or Google Play
(Android) by scanning the QR code.
Note: Ensure that your device is wirelessly connected to the same network as the
DCS-8620LH.
1/

9D-Link DCS-8620LH User Manual
Section 2 - Installation
Power on the device and wait for the Status LED to ash orange.
Note: Make sure that your mobile device’s Bluetooth is on.
3/
Place your device next to your mobile device. A prompt will appear -
tap Add Device, then follow the app instructions.
4/
DCS-8620LH

10D-Link DCS-8620LH User Manual
Section 2 - Installation
Device Placement
To get the most out of your camera’s view and features, please take the following placement guidelines into consideration.
Height: Place the camera 2 to 2.5 meters (6.5 to 8 feet) from the ground. Higher or lower installation points will greatly
decrease person detection accuracy.
Person Detection: Person Detection works best when the subject is between 2 to 7 meters (6.5 to 23 feet) away from the
camera.
2 - 2.5m
(6.5 - 8ft.)
Ideal Viewing Distance: 2 - 7 m (6.5 - 23ft.)
2m (6.5ft.)

11D-Link DCS-8620LH User Manual
Section 2 - Installation
Place the mounting bracket against the pole where you want it to
be positioned.
Mounting the Camera
Pole Mount
1/
Wrap the cable ties around the pole and thread them through the
holes on the mounting bracket. Face the rough side of the cable ties
to the pole to avoid slippage.
2/
Twist the camera clockwise onto the mounting bracket until it securely
locks into place.
3/
RESET

RESET

RESET


12D-Link DCS-8620LH User Manual
Section 2 - Installation
Place the mounting bracket against the wall where you want the device
to be positioned. Use a pencil to make two marks where the holes are
located.
Note: The mounting bracket is attached to the bottom of the device.
Turn the mounting bracket counterclockwise to detach it.
Use a 6 mm drill bit to drill two 26 mm deep holes over the pencil marks.
1/
2/
3/
Wall/ Ceiling Mount
The device can be mounted on a wall or on the ceiling.
RESET

RESET

Hammer in the plastic wall anchors to support the screws.
RESET


13D-Link DCS-8620LH User Manual
Section 2 - Installation
Twist the camera clockwise onto the mounting bracket until it securely
locks into place.
4/
5/
Align the mounting bracket’s holes over the plastic anchors. Drive the screws
into the anchors to secure the mounting bracket.
RESET

For outdoor installations: This device is designed to be installed under eaves or similarly covered locations, and does not support inverted
installation. Please ensure that the device is installed with the rubber plug pointed downwards towards the ground, and that it is not installed in
an area where it will experience continuous water exposure.

14D-Link DCS-8620LH User Manual
Section 3 - mydlink
Using the mydlink App
Controlling Your Device
After setting up your DCS-8620LH 2K QHD Outdoor Wi-Fi Camera with a
mydlink account in the mydlink app, you will be able to remotely access your
camera through the app. After signing into your mydlink account, you will
see a screen similar to the one on the right.
To access the device control options, tap to watch the live view, then tap
again to access the control page. The following controls are available:
Audio Tap to disable audio. Tap to enable
audio.
Snapshot Tap to take a snapshot of the video
stream.
Recording Tap to enable video stream recording.
Two Way Talk Tap to send your voice to the camera's
built-in speaker.
Siren
Tap to turn the siren on and o. The siren
will turn o automatically after the timeout
period has been reached.
Video Resolution Tap to use 1440p resolution video. Tap
720P to use 720p resolution video.
Note: Screenshots are representative only. The mydlink app is constantly being updated
and so may appear dierent.
DCS-8620LH-C8A0
DCS-8620LH-C8A0
DCS-8620LH

15D-Link DCS-8620LH User Manual
Section 3 - mydlink
Device Settings
To access the Device Settings page:
1. Tap .
2. Tap Device Settings.
3. Tap the device you want to access its settings.
The device page contains several options for you to congure your camera.
DCS-8635LH-2AE9
DCS-8620LH

16D-Link DCS-8620LH User Manual
Section 3 - mydlink
1 Device Name Tap to change the device’s name.
2 Privacy Mode Tap to enable. Privacy mode will disable the camera feed.
3 Motion and Person Detection Tap to set the Motion and Person Detection sensitivity settings.
4 Vehicle Detection Sends notications when vehicles are detected (within 50 feet of the camera view).
5Siren Timeout Set the auto-off timer for the siren. This setting will apply to manual operation and
Automations.
6 Storage Tap to change the video clips storage location from the microSD card to the cloud. You can
also subscribe to mydlink Cloud from here and view your current subscription plan.
7 Camera Microphone Tap to enable or disable picking up sound near your camera in live view and recordings.
8Color Night Vision
Tap to change night vision detection to On, O or Auto. Color Night Vision is enabled by
default and allows you to see color images while viewing the live feed in low
light scenarios.
9 Anti-Flicker Reduces icker in the video. Tap 50 Hz or 60 Hz depending on the frequency of your lights.
10 Status LED Disabling this to turn o LED indicators.
11 Designated Contact Tap to add, remove, or edit designated contacts for quick phone call upon receiving a
notication.
12 Wi-Fi
Tap to change the wireless network this device will use to connect to the Internet.
Note: The network must be the same as all your other mydlink devices that you wish to use
the same account for.
13 Time Zone Select the time zone to calibrate your device to.
14 Firmware This displays the installed version of the rmware on your device. Tap to enter the update
settings. You can choose the most suitable time for automatic updates.
15 ONVIF Tap to enable ONVIF to allow ONVIF-compatible devices to manage the camera.
16 MAC ID A unique physical address for identifying your device.
17 Restart Device Tap this button to restart the device
18 Remove Device Tap this button to disconnect this device from your mydlink account.
3
1
2
4
5
6
7
8
9
10
11
17
18
16
15
12
13
14
1
3

17D-Link DCS-8620LH User Manual
Section 4 - Troubleshooting
Troubleshooting
What do I do if my device is not working properly?
Reset the device and reinstall it. To reset your device, use a paper clip to press and hold the recessed Reset button until the
LED turns solid red.
During installation, ensure that:
• your router is connected to the Internet and has Wi-Fi enabled
• your mobile device has Bluetooth enabled
• your mydlink device is in range of your Wi-Fi network
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the
following websites:
Alexa: dlink.com/en/alexa
The Google Assistant: dlink.com/en/google-assistant
Why is my microSD card not working/not supported?
The microSD card must be formatted with the correct le system (FAT32) before it can be used with this product. This can be
done in the mydlink app by selecting the Format function in the storage menu under the Device Settings.
What is my username and password for setting up my device with an ONVIF system?
To connect your device to an ONVIF system, enter“admin”as the username and use the PIN code of your mydlink device as
the password. You can nd the PIN code on your device’s label.