D-Link MyDlink DCS-8515LH User manual

1

2

3

4
OR

5

6
Where a microSD card can be inserted in order to save video recordings.
Note: Please use the mydlink app to tilt the camera up to reveal the slot.

Minimum Requirements
To install this product, you will need:
• An 802.11 g/n wireless router
• An Internet connection
• The latest version of the mydlink app from the App Store or Google Play.
Please refer to the app's store page to check whether your device is
compatible.
• An e-mail account (required to register for mydlink service)

Camera Mounting Instructions
Step 1:
Place the mount at the desired location, assuring
that location of the power cord thread is also at the
desired location. Use a pencil to mark the holes.
Step 2:
Using a 6 mm drill bit, drill two 25 mm deep holes
over the pencil marks. For a plaster, drywall, or
concrete wall, insert the plastic anchors to support
the screws rst.
Step 4:
Align the bottom of the camera to the threads on the
mount. Assure that the camera is securely snapped
into place.
Step 3:
Place the mount over the holes that are in the wall.
Make sure to align the mount holes with the holes
in the wall. Use the supplied screws to attach the
mount to the surface of the wall.
1
2
3
4

Camera LED Information
DCS-8515LH
Status LED
System booting / Factory resetting
Data is being transferred
Bluetooth enabled
Wireless connected
Firmware updating
BLE pairing / Ready for setup