D-Link DWL-3200AP - AirPremier - Wireless Access... User manual

2
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Table of Contents
Table of Contents
Table of Contents.................................................................. 2
Package Contents ................................................................ 3
Introduction........................................................................... 4
Features and Benefits .......................................................... 6
Wireless Basics .................................................................... 7
Three Operational Modes................................................... 10
Getting Started ................................................................... 11
Using the Configuration Menu ............................................ 13
AP Manager II..................................................................... 58
Networking Basics.............................................................. 59
Troubleshooting .................................................................. 75
Technical Specifications ..................................................... 81
Contacting Technical Support............................................. 84
Warranty ............................................................................ 85
Registration ....................................................................... 87

3
DWL-3200AP User’s Manual
D-Link Systems, Inc.
D-Link AirPremierTM DWL-3200AP
Managed Wireless Access Point
Power over Ethernet base unit
Power Adapter-DC 48V, 0.4A
Power Cord
Manual and Warranty on CD
Install Guide
Ethernet Cable
Package Contents
Minimum System Requirements
Note: Using a power supply with a different voltage than the one included with the
DWL-3200AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Computers with Windows®, Macintosh®, or Linux-based operating systems with
an installed Ethernet Adapter
Internet Explorer version 7.0 or Mozilla Firefox version 3.0 and above
Package Contents
Mounting Plate

4
DWL-3200AP User’s Manual
D-Link Systems, Inc.
At up to fifteen times the speed of previous wireless devices (maximum wireless signal rate of up
to 108Mbps* in Super G mode), you can work faster and more efficiently, increasing productivity.
With the DWL-3200AP, bandwidth-intensive applications like graphics or multimedia will benefit
significantly because large files are able to move across the network quickly.
The DWL-3200AP is capable of operating in one of 3 different wireless networking modes; access
point, WDS (Wireless Distribution System) with AP, or WDS mode.
Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet).
With PoE, the DWL-3200AP shares power and data over the CAT5 cable, making the setup of
your network less expensive and more convenient.
An ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices
or other workplaces, trade shows and special events, the DWL-3200AP provides data transfers
at up to 108Mbps in Super G mode when used with other D-Link AirPremier products. (The
802.11g standard is backwards compatible with 802.11b devices.)
Introduction
Introduction
*”Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead
lower actual data throughout rate.”
WPA is offered in two flavors: Enterprise (used for corporations) and Personal (used for home
users).
WPA-Personal and WPA2-Personal is directed at home users who do not have the server based
equipment required for user authentication.The method of authentication is similar to WEP because
you define a “Pre-Shared Key” on the wireless router/AP. Once the pre-shared key is confirmed
and satisfied on both the client and access point, then access is granted.The encryption method
used is referred to as the Temporal Key Integrity Protocol (TKIP), which offers per-packet dynamic
hashing. It also includes an integrity checking feature which ensures that the packets were not
tampered with during wireless transmission. WPA2-Personal is far superior to WPA-Personal,
because the encryption of data is upgraded with the Advanced Encryption Standard (AES).

5
DWL-3200AP User’s Manual
D-Link Systems, Inc.
WPA-Enterprise and WPA2-Enterprise is ideal for businesses that have existing security
infrastructures in place. Management and security implementation can now be centralized on
a server participating on the network. Utilizing 802.1x with a RADIUS (Remote Authentication
Dial-in User Service) server, a network administrator can define a list of authorized users who
can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise or
WPA2-Enterprise configured, the new client will be challenged with a username and password. If
the new client is authorized by the administration, and enters the correct username and password,
then access is granted. In a scenario where an employee leaves the company, the network
administrator can remove the employee from the authorized list and not have to worry about
the network being compromised by a former employee. WPA2-Enterprise is far superior to
WPA-Enterprise, because the encryption of data is upgraded with the Advanced Encryption
Standard (AES).
802.1x: Authentication which is a first line of defense against intrusion. In the authentication
process, the Authentication Server verifies the identity of the client attempting to connect to the
network. Unfamiliar clients would be denied access.
EAP (Extensible Authentication Protocol) is available through the Windows®XP operating
system.You will need to use the same type of EAP protocol on all devices in your network when
using the 802.1x feature.
Introduction

6
DWL-3200AP User’s Manual
D-Link Systems, Inc.
3 Different Operation modes - Capable of operating in one of three different
operation modes to meet your wireless networking requirements: Access Point;
WDS with AP, or WDS.
Easy Installation with PoE (Power over Ethernet).
Faster wireless networking with the 802.11g standard to provide a maximum
wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to
108Mbps* in Super G mode).
Compatible with the 802.11b standard to provide a wireless data rate of up to
11Mbps - that means you can migrate your system to the 802.11g standard on
your own schedule without sacrificing connectivity.
Better security withWPA - The DWL-3200AP can securely connect wireless clients
on the network using WPA (Wi-Fi Protected Access) providing a much higher level
of security for your data and communications than has previously been available.
AP Manager II Management Software - Makes network configuration quick
and simple and will allow you to manage multiple access points from a single
computer.
SNMP for Management - The DWL-3200AP is not just fast but it also supports
SNMP v.3 for a better network management. Superior wireless AP Manager II
software is bundled with the DWL-3200AP for network configuration and firmware
upgrade. Systems administrators can also setup the DWL-3200AP easily with
the Web-based configuration. A D-Link D-View module will be downloadable for
network administration and real-time network traffic monitoring with D-Link D-View
software.
Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).
Operates in the 2.4GHz frequency range.
Web-based interface for managing and configuring.
Features and Benefits
Features and Benefits
*”Maximum wireless signal rate derived from IEEE Standard 802.11a and 802.11g specifications. Actual data throughput will
vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead lower actual data throughout rate.”

7
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible
high-speed wireless connectivity within your home, business or public access wireless networks.
D-Link wireless products will allow you access to the data you want, when and where you want
it. You will be able to enjoy the freedom that wireless networking brings.
A Wireless Local Area Network (WLAN) is a computer network that transmits and receives
data with radio signals instead of wires. WLANs are used increasingly in both home and office
environments, and public areas such as airports, coffee shops and universities. Innovative ways to
utilize WLAN technology are helping people to work and communicate more efficiently. Increased
mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial
for many users.
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location within the
operating range of the WLAN. Management decisions based on real-time information can
significantly improve worker efficiency.
Low Implementation Costs - WLANs are easy to set up, manage, change and relocate. Networks
that frequently change can benefit from WLANs ease of implementation. WLANs can operate in
locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy and can
eliminate the need to pull cable through walls and ceilings.Wireless technology allows the network
to go where wires cannot go - even outside the home or office.
Inexpensive Solution - Wireless network devices are as competitively priced as conventional
Ethernet network devices. The DWL-3200AP saves money by providing multi-functionality,
configurable in one of four different modes.
Scalability - WLANs can be configured in a variety of ways to meet the needs of specific
applications and installations. Configurations are easily changed and range from Peer-to-Peer
networks suitable for a small number of users to larger Infrastructure networks to accommodate
hundreds or thousands of users, depending on the number of wireless devices deployed.
Wireless users can use the same applications they use on a wired network.Wireless adapter cards
used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
Wireless Basics

8
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Standards-based Technology
The DWL-3200AP Managed Wireless Access Point utilizes the 802.11b and the 802.11g
standards.
The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the maximum
wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to 108Mbps* in Super
G mode) within the 2.4GHz band, utilizing OFDM technology.
This means that in most environments, within the specified range of this device, you will be able
to transfer large files quickly or even watch a movie in MPEG format over your network without
noticeable delays. This technology works by transmitting high-speed digital data over a radio
wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by
splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously
at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in
signal transmissions.
The D-Link DWL-3200AP will automatically sense the best possible connection speed to ensure
the greatest speed and range possible.
802.11g offers the most advanced network security features available today, including WPA and
WPA2.
Wireless Basics
*”Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead
lower actual data throughout rate.”

9
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Wireless Basics
The D-Link AirPremier DWL-3200AP lets you access your network, using a wireless connection,
from virtually anywhere within its operating range. Keep in mind, however, that the number,
thickness and location of walls, ceilings, or other objects that the wireless signals must pass
through, may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business.The key to maximizing wireless
range is to follow these basic guidelines:
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or
appliances that generate RF noise.
4
Keep the number of walls and ceilings between the DWL-3200AP and other network
devices to a minimum - each wall or ceiling can reduce your DWL-3200AP’s range
from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or
ceilings is minimized.
1
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a
2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the
signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
2
Building materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or open
doorways and not other materials.
3
Installation Considerations

10
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Three Operational Modes
Three Operational Modes

11
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Getting Started
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to a Router.
(See the printed Install Guide included with your router.)
If you are connecting a desktop computer to your network, install the D-Link
WDA-2320 wireless PCI adapter into an available PCI slot on your desktop
computer.
(See the printed Install Guide included with the network adapter.)
Install the drivers for the D-Link WNA-2330 wireless Cardbus adapter into a laptop
computer.
(See the printed Install Guide included with the WNA-2330.)
Connect the DWL-3200AP to the PoE base unit.
(See the printed Install Guide included with the DWL-3200AP.)
Connect the Ethernet Broadband Router to the PoE base unit.
(See the printed Install Guide included with the DWL-3200AP.)
2
3
4
5
6
7
You will need broadband Internet access.
1
Getting Started

12
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Getting Started
Connecting PoE (Power over Ethernet)
Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DWL-3200AP and the other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch, using a straight through cable, or to a PC, using a
crossover cable.
Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
Step 1
Step 2
Step 3

13
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Using the Configuration Menu
To configure the DWL-3200AP, use a computer which is connected to the DWL-3200AP with an
Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this
function, go to Control Panel > Internet Options > Connections > LAN Settings and
uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator™).
Type the IP address and http port of the DWL-3200AP in the address field (http://192.168.0.50)
and press Enter. Make sure that the IP addresses of the DWL-3200AP and your computer
are in the same subnet.
After the connection is established, you will see the user identification window as shown.
Note: If you have changed the default IP address assigned to the DWL-3200AP, make sure to
enter the correct IP address.

 



Type admin in the User Name field
Leave the Password field blank
Click OK
Note: If you have changed the password, make sure to enter the correct password.

14
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
After successfully logging into the DWL-3200AP the following screen appears:
When making changes on most of the configuration screens in this section, use the Apply button
at the bottom of each screen to save your configuration changes.
Click to apply configuration changes.

15
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Home > Basic Settings > Wireless
Access Point is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.The
SSID can be up to 32 characters and is case-sensitive.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Auto Channel Scan is set by default. All devices on the network
must share the same channel.To change the channel, uncheck Auto
Channel Scan. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Mode:
SSID:
SSID Broadcast:
Channel:
Wireless Band: IEEE 802.11g

16
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Auto Channel
Scan:
Authentication:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Open System
Shared Key
Open System/Shared Key
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise,WPA2-Enterprise,WPA-Auto-Enterprise
to secure your network with the inclusion of a RADIUS server.
Select WPA-Personal, WPA2-Personal, WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS server required).
Using the Configuration Menu
Valid Key:
First through
Fourth keys:
Encryption: Select Disabled or Enabled. (Disabled is selected here).
Key Type*:
Key Size:
Input up to four keys for encryption. You will select one of these
keys in the valid key field.
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
*ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.

17
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Home > Basic Settings > Wireless > WPA-Enterprise,
WPA2-Enterprise, & WPA-Auto-Enterprise
Using the Configuration Menu
Access Point is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.The
SSID can be up to 32 characters and is case-sensitive.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Auto Channel Scan is set by default. All devices on the network
must share the same channel.To change the channel, uncheck Auto
Channel Scan. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Mode:
SSID:
SSID Broadcast:
Channel:
Wireless Band: IEEE 802.11g

18
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Auto Channel
Scan:
Authentication:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Open System
Shared Key
Open System/Shared Key
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that
share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise,WPA2-Enterprise,WPA-Auto-Enterprise
to secure your network with the inclusion of a RADIUS server.
Select WPA-Personal, WPA2-Personal, WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS server required).
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
*ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Select the interval durin he group key will be valid. 1800 is
the recommended value. A lower interval may reduce transfer data
rate.
Cipher Type:
Group Key Update
Interval:
When you select WPA-Enterprise, WPA2-Enterprise
or WPA-Auto-Enterprise , you must select AES, AUTO,
or TKIP from the pull-down menu.
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
Accounting Mode: Select if you want to use a different server for accounting.
Accounting Server: Enter the IP address of the Accounting server.
Accounting Port: Enter the Accounting port.

19
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Home > Basic Settings > Wireless > WPA-Personal, WPA2-Personal,
& WPA-Auto-Personal
Using the Configuration Menu
Access Point is selected from the pull-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.The
SSID can be up to 32 characters and is case-sensitive.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Auto Channel Scan is set by default. All devices on the network
must share the same channel.To change the channel, uncheck Auto
Channel Scan. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Mode:
SSID:
SSID Broadcast:
Channel:
Wireless Band: IEEE 802.11g

20
DWL-3200AP User’s Manual
D-Link Systems, Inc.
Auto Channel
Scan:
Authentication:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Open System
Shared Key
Open System/Shared Key
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that
share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise,WPA2-Enterprise,WPA-Auto-Enterprise
to secure your network with the inclusion of a RADIUS server.
Select WPA-Personal, WPA2-Personal, WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS server required).
Cipher Type:
Group Key Update
Interval:
Select the interval during which the group key will be valid.The default
value of 1800 is recommended.
When you select WPA-Personal, please select AUTO, AES, orTKIP
from the pull down menu.
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the
corresponding field.