D-Link Rangebooster N 650 Access Point DAP-1353 User manual

2D-Link DAP-1353 User Manual
Table of Contents
Product Overview ........................................................ 4
Package Contents ...................................................4
System Requirements .............................................4
Introduction ..............................................................5
Features ..................................................................7
Wireless Basics ........................................................... 8
Standards-Based Technology .................................9
Wireless Installation Considerations ...................... 10
Five Operational Modes ............................................ 11
Getting Started ...........................................................12
Conguration ............................................................. 14
Home > Basic Settings .......................................... 16
Wireless ..........................................................16
Access Point mode ...................................... 16
WDS with AP mode .....................................18
WDS mode ...................................................20
AP Repeater mode ....................................... 22
Wireless Client mode ...................................23
Open System/Shared Key authentication .... 24
WPA-Personal authentication ...................... 25
WPA-Enterprise authentication .................... 26
LAN ................................................................. 27
Home > Advanced Settings ................................... 28
Performance .................................................... 28
Multi-SSID ........................................................30
VLAN ...............................................................32
VLAN List .....................................................32
Port List ........................................................33
Add/Edit VLAN .............................................34
PVID Setting .................................................35
Intrusion ........................................................... 36
Schedule .......................................................... 37
QoS ..................................................................38
AP Array ..........................................................40
ARP Spoong Prevention ................................ 43
DHCP Server .................................................. 44
Dynamic Pool Settings ................................. 44
Static Pool Setting ........................................46
Current IP Mapping List ............................... 48
Filters ............................................................... 49
Wireless MAC ACL ...................................... 49
WLAN Partition .............................................50
Home > Status ......................................................51
Device Information ........................................... 51
Client Information .............................................52
WDS Information .............................................53
Stats .................................................................54
Table of Contents

3D-Link DAP-1353 User Manual
Table of Contents
Ethernet ........................................................54
WLAN ...........................................................55
Log ................................................................... 56
View Log ......................................................56
Log Settings .................................................57
Maintenance ......................................................... 58
Administrator Settings ......................................58
Limit Administrator ....................................... 59
System Name Settings .................................60
Login Settings ..............................................61
Console Settings .......................................... 62
SNMP Settings .............................................63
Firmware and SSL Certication Upload ................64
Conguration File ..................................................65
Time and Date ....................................................... 66
System ............................................................. 67
System Settings ........................................... 67
Help ....................................................................... 68
Troubleshooting ........................................................ 69
Networking Basics .................................................... 71
Check your IP address .......................................... 71
Statically Assign an IP address ............................. 72
Technical Specications........................................... 74

4D-Link DAP-1353 User Manual
Section 1 - Product Overview
• D-Link DAP-1353 Range Booster N 650 Access Point
• Power Adapter
• CAT5 Ethernet Cable
• CD-ROM with User Manual
• Quick Install Guide
• 3 Detachable Antennas
System Requirements
• Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet
Adapter
• Internet Explorer Version 7.0 or Firefox 3.0 and Above (for conguration)
Product Overview
Package Contents
Note: Using a power supply with a different voltage rating than the one included
with the DAP-1353 will cause damage and void the warranty for this product.

5D-Link DAP-1353 User Manual
Section 1 - Product Overview
Introduction
The DAP-1353 802.11n 2.4GHZ AP increases productivity by allowing you to work faster and more efciently. With the
DAP-1353, bandwidth-intensive applications like graphics or multimedia will benet signicantly because large les
are now able to move across the network quickly.
The DAP-1353 is capable of operating in one of four different wireless networking modes; access point, WDS (Wireless
Distribution System) with AP, WDS, AP Repeater or Wireless Client mode.
An ideal solution for quickly creating and extending a wireless local area network (WLAN) in ofces or other workplaces,
trade shows, and special events, the DAP-1353 providing data transfer rates up to 300Mbps. (The 802.11n standard is
backwards compatible with 802.11g, and 802.11b devices.)
WPA/WPA2 is offered in two avors: Enterprise (used for corporations) and Personal (used for home users).
WPA-Personal and WPA2-Personal are directed towards home users who do not have the server-based equipment
required for user authentication. The method of authentication is similar to WEP because you dene a “Pre-Shared
Key” on the wireless router/AP. Once the pre-shared key is conrmed and satised at both the client and access point,
access is then granted. The encryption method used is referred to as the Temporal Key Integrity Protocol (TKIP), which
offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were
not tampered with during wireless transmission.
WPA-Enterprise and WPA2-Enterprise are ideal for businesses that already have existing security infrastructures
established. Management and security implementation can now be centralized on a server participating on the network.
Utilizing 802.1x with a RADIUS (Remote Authentication Dial-in User Service) server, a network administrator can
dene a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with
WPA-Enterprise congured, the new client will be requested to enter a username with a password. If the new client
is authorized by the administration, and enters the correct username and password, then access is then granted. In
the case where an employee leaves the company, the network administrator is able to remove the previous employee
from the authorized list to avoid compromising the network.

6D-Link DAP-1353 User Manual
Section 1 - Product Overview
EAP (Extensible Authentication Protocol) is available through the Windows® XP operating system. You will need to
use the same type of EAP protocol on all devices in your network when using the 802.1x feature.
*Maximum wireless signal rate derived from IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions
and environmental factors, including volume of network trafc, building materials and construction, and network overhead can lower actual
data throughout rate.

7D-Link DAP-1353 User Manual
Section 1 - Product Overview
• Four different operation modes - Capable of operating in one of four different operation modes to meet your
wireless networking needs: Access Point, WDS with AP, WDS, AP Repeater or Wireless Client.
• Faster wireless networking with the 802.11n standard to provide a maximum wireless signal rate of up to 300
Mbps*.
• Compatible with the 802.11b standard to provide a wireless data rate of up to 11 Mbps, allowing you to migrate
your system to the 802.11n and 802.11g standards on your own schedule without sacricing connectivity.
• Better security with WPA - The DAP-1353 can securely connect wireless clients on the network using WPA (Wi-Fi
Protected Access) to provide a much higher level of security for your data and communications than its previous
versions.
• AP Manager II management software - The real-time display of the network's topology and AP’s information
makes network conguration and management quick and simple.
• SNMP for management - The DAP-1353 is not just fast, but also supports SNMP v.3 for better network
management. Superior wireless AP manager software is bundled with the DAP-1353 for network conguration
and rmware upgrade. Systems administrators can also set up the DAP-1353 easily with the Web-based
conguration. A D-Link D-View 6.0 module will be downloadable for network administration and real-time network
trafc monitoring with D-Link D-View 6.0 software.
• Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).
• Supports one 10/100/1000M Ethernet port.
• Operates in the 2.4~2.5 GHz frequency ranges.
• Web-based interface for managing and conguring.
*Maximum wireless signal rate derived from IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions and environmental factors,
including volume of network trafc, building materials and construction, and network overhead can lower actual data throughout rate.
Features

8D-Link DAP-1353 User Manual
Section 2 - Installation
Wireless Basics
D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to
use within your home, business or public access wireless networks. D-Link wireless products provides you with access
to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to
you.
WLAN use is not only increasing in both home and ofce environments, but in public areas as well, such as airports,
coffee shops and universities. Innovative ways to utilize WLAN technology are allowing people to work and communicate
more efciently. Increased mobility and the absence of cabling and other types of xed infrastructure have proven to
be benecial to many users.
Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards,
allowing wireless users to use the same applications as those used on a wired network.
People use WLAN technology for many different purposes:
Mobility - productivity increases when people can have access to data in any location within the operating range of their
WLAN. Management decisions based on real-time information can signicantly improve the efciency of a worker.
Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently
change can benet from WLAN's ease of implementation. WLANs can operate in locations where installation of wiring
may be impractical.
Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system can be
fast and easy during installation, especially since it can eliminate the need to pull cable through walls and ceilings.
Wireless technology provides more versatility by extending the network beyond the home or ofce.
Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network devices.
The DAP-1353 saves money by providing users with multi-functionality congurable in four different modes.
Scalability - Congurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number
of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number
of wireless devices deployed.

9D-Link DAP-1353 User Manual
Section 2 - Installation
Standards-Based Technology
The DAP-1353 Wireless Access Point utilizes the 802.11b, 802.11g, and 802.11n standards.
The IEEE 802.11n standard is an extension of the 802.11b, and 802.1g standards that came before it. It increases the
maximum wireless signal rate up to 300 Mbps* within 2.4 GHz bands, utilizing OFDM technology.
This means that in most environments - within the specied range of this device - you will be able to transfer large les
quickly, or even watch a movie in MPEG format over your network without noticeable delays. This technology works
by transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing)
technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then simultaneously
transmitted at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal
transmissions.
The D-Link DAP-1353 will automatically sense the best possible connection speed to ensure the greatest possible
speed and range.
802.11n offers the most advanced network security features available today, including WPA.
*Maximum wireless signal rate derived from IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network trafc, building
materials and construction, and network overhead can lower actual data throughout rate.

10D-Link DAP-1353 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually
anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and
location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical
ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the access point and other network devices to a minimum.
Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices
so that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a
45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet
(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead
of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect
on the range. Try to position access points, wireless routers, and computers so that the signal passes
through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation,
water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that
generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and
home security systems), your wireless connection may degrade dramatically or drop completely. Make
sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits
a signal even if the phone in not in use.

11D-Link DAP-1353 User Manual
Section 2 - Installation
Wireless Client
AP Repeater
AP acts as a wireless network adapter for your Ethernet-enabled
device
AP acts as a repeater to extend to wireless coverage
Access Point (AP) Create a wireless LAN
WDS with AP Wirelessly connect multiple networks while still functioning
as a wireless AP
WDS Wirelessly connect multiple networks
Four Operational Modes

12D-Link DAP-1353 User Manual
Section 2 - Installation
Getting Started
1. You will need broadband Internet access.
2. Consult with your cable or DSL provider for proper installation of the modem.
3. Connect the cable or DSL modem to a router. See the printed Install Guide included with your router.
4. If you are connecting a desktop computer to your network, install a wireless PCI adapter into an available
PCI slot on your desktop computer.
5. Install the drivers for your wireless CardBus adapter into a laptop computer.

13D-Link DAP-1353 User Manual
Section 2 - Installation
Connect one end of an Ethernet cable (included with your package) to the LAN port on the DAP-1353 and the other end
of the Ethernet cable to your computer. The AP can be powered on by the power adapter shipped with the AP.

14D-Link DAP-1353 User Manual
Section 3 - Configuration
Configuration
To congure the DAP-1353, use a computer that is connected to the DAP-1353 with an Ethernet cable (see the Network
Layout diagram ).
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet
Options > Connections > LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Mozilla Firefox).
Type the IP address and http port of the DAP-1353 in the address eld (http://192.168.0.50)
and press Enter. Make sure that the IP addresses of the DAP-1353 and your computer
are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-1353, make sure to enter the
correct IP address.
Enter the user name (admin) and your
password. Leave the password eld
blank by default, and click Login.
Note: If you have changed the password, make sure to enter the correct password.

15D-Link DAP-1353 User Manual
Section 3 - Configuration
After successfully logging into the DAP-1353 the following screen will appear:
When making changes on most of the conguration screens in this section, use the Apply button at the bottom of each
screen to save your conguration changes.
Click the Apply button to congure changes.

16D-Link DAP-1353 User Manual
Section 3 - Configuration
Home > Basic Settings
Wireless
Access Point mode
Select Access Point from the pull-down menu.
The other three choices are WDS with AP,
WDS, and Wireless Client.
Service Set Identifier (SSID) is the name
designated for a specic wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network. The SSID can
be up to 32 characters and is case-sensitive.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that provides the best wireless
performance. Enable is set by default. The
channel selection process only occurs when the
AP is booting up.
All devices on the network must share the same channel. To change the channel, rst toggle the Auto Channel Selection
setting to Disable, and then use the pull-down menu to make the desired selection.
Note: The wireless adapters will automatically scan and match the wireless settings.
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Wireless Band: 2.4 GHz

17D-Link DAP-1353 User Manual
Section 3 - Configuration
Channel Width:
Authentication:
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.
Use the pull-down menu to choose Open System, Shared Key, WPA-Personal, or WPA-Enterprise.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is
required.
Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.

18D-Link DAP-1353 User Manual
Section 3 - Configuration
WDS with AP mode
WDS with AP mode is selected from the pull-down
menu.
Service Set Identier (SSID) is the name designated for a
specic wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making it
visible to all network users.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP is
booting up.
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.)
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Wireless Band:
In WDS with AP mode, the DAP-1353 wirelessly connects
multiple networks while still functioning as a wireless AP.
2.4GHz.

19D-Link DAP-1353 User Manual
Section 3 - Configuration
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Click on the Scan button to search for available wireless networks, then click on the available network that you want to
connect with.
Use the pull-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,
this option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is
required.
Remote AP MAC
Address:
Site Survey:
Authentication:

20D-Link DAP-1353 User Manual
Section 3 - Configuration
WDS mode
In WDS mode, the DAP-1353 wirelessly connects multiple
networks, without functioning as a wireless AP.
WDS is selected from the pull-down menu.
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed
to connect to an existing wireless network or to
establish a new wireless network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in
WDS mode.
All devices on the network must share the same
channel. To change the channel, use the pull-down
menu to make the desired selection.
Use the pull-down menu to choose 20 MHz or Auto 20/40 MHz.
Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Remote AP MAC
Address:
Wireless Band: 2.4GHz.