D3D D10 Operator's manual

D3D Wi-Fi/GSM Smart Alarm System
Quick View

Panel View
Front Panel View
Speaker
Away Arm
S O S
Home Arm
Disarm
LED Indicator
LED Indicator
- When LED indicates BLUE, the system is in
normal working status
- When LED indicates WHITE, it means WIFI
offline, no WIFI network
- When LED indicates RED, the system is in alarming
status
Check GSM signal: Press SOS button on the panel once, if
LED indicates blue and flash 5 times and then long light, it
means GSM is not working ( No SIM card inserted, bad signal
or SIM card disconnected )
*To activate SOS, long press SOS button for 10 seconds

Back View
Wiring Slot
Tamper
Button
WIFI /Reset Button
SIM Card Slot
DC 12V Wired Connection
- Press WIFI/RESET button for 3s, the alarm panel will
enter into WIFI connecting mode
- Press WIFI/RESET button for 6s, delete existing
WiFi connection.
- Press WIFI/RESET button for 9s, system will factory
reset.