Daikin FTXP35N5V1B9 Product information sheet

User reference guide
Daikin room air conditioner
FTXP20N5V1B9
FTXP25N5V1B9
FTXP35N5V1B9
ATXP20N5V1B9
ATXP25N5V1B9
ATXP35N5V1B9

Table of contents
User reference guide
2
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
Table of contents
1 About the documentation 4
1.1 About this document ...................................................................................................................................................... 4
1.2 Meaning of warnings and symbols................................................................................................................................. 4
2 User safety instructions 6
2.1 General............................................................................................................................................................................ 6
2.2 Instructions for safe operation ....................................................................................................................................... 7
3 About the system 10
3.1 Indoor unit ...................................................................................................................................................................... 10
3.1.1 Indoor unit display.......................................................................................................................................... 11
3.2 About the user interface................................................................................................................................................. 11
3.2.1 Components: Wireless remote control.......................................................................................................... 12
3.2.2 Status: Wireless remote control LCD ............................................................................................................. 12
3.2.3 To operate the wireless remote control........................................................................................................ 13
4 Before operation 14
4.1 Overview: Before operation ........................................................................................................................................... 14
4.2 To insert the batteries .................................................................................................................................................... 14
4.3 To mount the wireless remote control holder............................................................................................................... 14
4.4 To turn on the power supply .......................................................................................................................................... 15
5 Operation 16
5.1 Operation range.............................................................................................................................................................. 16
5.2 When to use which feature ............................................................................................................................................ 16
5.3 Operation mode and temperature setpoint .................................................................................................................. 17
5.3.1 To start/stop operation mode and to set the temperature.......................................................................... 18
5.4 Airflow rate ..................................................................................................................................................................... 18
5.4.1 To adjust the airflow rate ............................................................................................................................... 18
5.5 Airflow direction ............................................................................................................................................................. 19
5.5.1 To adjust vertical airflow direction ................................................................................................................ 19
5.5.2 To adjust horizontal airflow direction............................................................................................................ 20
5.5.3 To use 3D airflow direction ............................................................................................................................ 20
5.6 Comfort airflow operation.............................................................................................................................................. 20
5.6.1 To start/stop Comfort airflow operation ....................................................................................................... 20
5.7 Powerful operation ......................................................................................................................................................... 21
5.7.1 To start/stop Powerful operation .................................................................................................................. 21
5.8 Econo operation.............................................................................................................................................................. 21
5.8.1 To start/stop Econo operation ....................................................................................................................... 22
5.9 OFF/ON timer operation................................................................................................................................................. 22
5.9.1 To start/stop OFF timer operation................................................................................................................. 23
5.9.2 To start/stop ON timer operation .................................................................................................................. 23
5.9.3 To combine OFF timer and ON timer............................................................................................................. 24
5.10 Wireless LAN connection................................................................................................................................................ 24
5.10.1 Precautions when using the wireless LAN ..................................................................................................... 24
5.10.2 To install the ONECTA app ............................................................................................................................. 24
5.10.3 To set the wireless connection ...................................................................................................................... 25
6 Energy saving and optimum operation 28
7 Maintenance and service 30
7.1 Overview: Maintenance and service .............................................................................................................................. 30
7.2 To clean the indoor unit and wireless remote control .................................................................................................. 31
7.3 To clean the front panel ................................................................................................................................................. 31
7.4 About the air filters......................................................................................................................................................... 32
7.5 To open the front panel.................................................................................................................................................. 32
7.6 To clean the air filters ..................................................................................................................................................... 32
7.7 To clean the titanium apatite deodorising filter and the silver particle filter (Ag-ion filter)......................................... 33
7.8 To replace the titanium apatite deodorising filter and the silver particle filter (Ag-ion filter) ..................................... 34
7.9 To close the front panel.................................................................................................................................................. 34
7.10 To take following items into account before a long idle period.................................................................................... 34
8 Troubleshooting 36
8.1 Symptoms that are NOT system malfunctions............................................................................................................... 38
8.1.1 Symptom: A sound like water flowing is heard ............................................................................................. 38
8.1.2 Symptom: A blowing sound is heard.............................................................................................................. 38
8.1.3 Symptom: A ticking sound is heard................................................................................................................ 38

Table of contents
User reference guide
3
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
8.1.4 Symptom: A whistling sound is heard............................................................................................................ 38
8.1.5 Symptom: A clicking sound during operation or idle time is heard .............................................................. 38
8.1.6 Symptom: A clapping sound is heard............................................................................................................. 38
8.1.7 Symptom: White mist comes out of a unit (Indoor unit) .............................................................................. 38
8.1.8 Symptom: The units can give off odours ....................................................................................................... 38
8.1.9 Symptom: The outdoor fan rotates while the air conditioner is not in operation ....................................... 39
8.2 Solving problems based on error codes ......................................................................................................................... 39
8.3 Troubleshooting for wireless LAN connection ............................................................................................................... 40
9 Disposal 42
10 Glossary 43

1 | About the documentation
User reference guide
4
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
1 About the documentation
1.1 About this document
Thank you for purchasing this product. Please:
▪Keep the documentation for future reference.
Target audience
Endusers
INFORMATION
This appliance is intended to be used by expert or trained users in shops, in light
industry, and on farms, or for commercial and household use by lay persons.
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions:
-Safety instructions that you must read before operating your system
-Format: Paper (in the box of the indoor unit)
▪Operation manual:
-Quick guide for basic usage
-Format: Paper (in the box of the indoor unit)
▪User reference guide:
-Detailed step-by-step instructions and background information for basic and
advanced usage
-Format: Digital files on https://www.daikin.eu. Use the search function to
find your model.
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your installer.
The original instructions are written in English. All other languages are translations
of the original instructions.
1.2 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.
DANGER: RISK OF BURNING/SCALDING
Indicates a situation that could result in burning/scalding because of extreme hot or
cold temperatures.

1 | About the documentation
User reference guide
5
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
DANGER: RISK OF EXPLOSION
Indicates a situation that could result in explosion.
WARNING
Indicates a situation that could result in death or serious injury.
WARNING: FLAMMABLE MATERIAL
WARNING: MILDLY FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
CAUTION
Indicates a situation that could result in minor or moderate injury.
NOTICE
Indicates a situation that could result in equipment or property damage.
INFORMATION
Indicates useful tips or additional information.
Symbols used on the unit:
Symbol Explanation
Before installation, read the installation and operation
manual, and the wiring instruction sheet.
Before performing maintenance and service tasks, read the
service manual.
For more information, see the installer and user reference
guide.
The unit contains rotating parts. Be careful when servicing or
inspecting the unit.
Symbols used in the documentation:
Symbol Explanation
Indicates a figure title or a reference to it.
Example: " 1–3 Figure title" means "Figure 3 in chapter 1".
Indicates a table title or a reference to it.
Example: " 1–3 Table title" means "Table 3 in chapter 1".

2 | User safety instructions
User reference guide
6
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
2 User safety instructions
Always observe the following safety instructions and regulations.
2.1 General
WARNING
If you are NOT sure how to operate the unit, contact your
installer.
WARNING
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved.
Children SHALL NOT play with the appliance.
Cleaning and user maintenance SHALL NOT be made by
children without supervision.
WARNING
To prevent electrical shocks or fire:
▪Do NOT rinse the unit.
▪Do NOT operate the unit with wet hands.
▪Do NOT place any objects containing water on the unit.
CAUTION
▪Do NOT place any objects or equipment on top of the
unit.
▪Do NOT sit, climb or stand on the unit.

2 | User safety instructions
User reference guide
7
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
▪Units are marked with the following symbol:
This means that electrical and electronic products may NOT be mixed with
unsorted household waste. Do NOT try to dismantle the system yourself:
dismantling the system, treatment of the refrigerant, of oil and of other parts
MUST be done by an authorised installer and MUST comply with applicable
legislation.
Units MUST be treated at a specialised treatment facility for reuse, recycling and
recovery. By ensuring this product is disposed of correctly, you will help to
prevent potential negative consequences for the environment and human
health. For more information, contact your installer or local authority.
▪Batteries are marked with the following symbol:
This means that the batteries may NOT be mixed with unsorted household
waste. If a chemical symbol is printed beneath the symbol, this chemical symbol
means that the battery contains a heavy metal above a certain concentration.
Possible chemical symbols are: Pb: lead (>0.004%).
Waste batteries MUST be treated at a specialised treatment facility for reuse. By
ensuring waste batteries are disposed of correctly, you will help to prevent
potential negative consequences for the environment and human health.
2.2 Instructions for safe operation
CAUTION
Do NOT insert fingers, rods or other objects into the air
inlet or outlet. When the fan is rotating at high speed, it
will cause injury.
WARNING
▪Do NOT modify, disassemble, remove, reinstall or repair
the unit yourself as incorrect dismantling or installation
may cause an electrical shock or fire. Contact your
dealer.
▪In case of accidental refrigerant leaks, make sure there
are no naked flames. The refrigerant itself is entirely
safe, non-toxic and mildly flammable, but it will
generate toxic gas when it accidentally leaks into a room
where combustible air from fan heaters, gas cookers,
etc. is present. Always have qualified service personnel
confirm that the point of leakage has been repaired or
corrected before resuming operation.

2 | User safety instructions
User reference guide
8
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
CAUTION
ALWAYS use the wireless remote control or other user
interface (if applicable) to adjust the position of the flaps
and louvers. When the flaps and louvers are swinging and
you move them forcibly by hand, the mechanism will
break.
CAUTION
NEVER expose little children, plants or animals directly to
the airflow.
WARNING
Do NOT place a flammable spray bottle near the air
conditioner and do NOT use sprays near the unit. Doing so
may result in a fire.
CAUTION
Do NOT operate the system when using a room
fumigation-type insecticide. Chemicals could collect in the
unit, and endanger the health of people who are
hypersensitive to chemicals.
WARNING
▪The refrigerant inside the unit is mildly flammable, but
normally does NOT leak. If the refrigerant leaks in the
room and comes in contact with fire from a burner, a
heater, or a cooker, this may result in fire, or the
formation of a harmful gas.
▪Turn OFF any combustible heating devices, ventilate the
room, and contact the dealer where you purchased the
unit.
▪Do NOT use the unit until a service person confirms that
the part from which the refrigerant leaked has been
repaired.
WARNING
▪Do NOT pierce or burn refrigerant cycle parts.
▪Do NOT use cleaning materials or means to accelerate
the defrosting process other than those recommended
by the manufacturer.
▪Be aware that the refrigerant inside the system is
odourless.

2 | User safety instructions
User reference guide
9
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
WARNING
The appliance shall be stored so as to prevent mechanical
damage and in a well-ventilated room without
continuously operating ignition sources (e.g. open flames,
an operating gas appliance, or an operating electric
heater). The room size shall be as specified in the General
safety precaution.
DANGER: RISK OF ELECTROCUTION
To clean the air conditioner or air filter, be sure to stop
operation and turn all power supplies OFF. Otherwise, an
electrical shock and injury may result.
CAUTION
After a long use, check the unit stand and fitting for
damage. If damaged, the unit may fall and result in injury.
WARNING
Be careful with ladders when working in high places.
WARNING
Improper detergents or cleaning procedure may cause
damage on plastic components or water leakage. Splashed
detergent on electric components, such as motors, may
cause failure, smoke or ignition.
DANGER: RISK OF ELECTROCUTION
Before cleaning, be sure to stop the operation, turn the
breaker OFF or pull out the supply cord. Otherwise, an
electrical shock and injury may result.
WARNING
Stop operation and shut OFF the power if anything
unusual occurs (burning smells etc.).
Leaving the unit running under such circumstances may
cause breakage, electrical shock or fire. Contact your
dealer.
WARNING: MILDLY FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.

3 | About the system
User reference guide
10
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
3 About the system
WARNING: MILDLY FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
NOTICE
Do NOT use the system for other purposes. In order to avoid any quality
deterioration, do NOT use the unit for cooling precision instruments, food, plants,
animals, or works of art.
3.1 Indoor unit
CAUTION
Do NOT insert fingers, rods or other objects into the air inlet or outlet. When the fan
is rotating at high speed, it will cause injury.
INFORMATION
The sound pressure level is less than 70dBA.
WARNING
▪Do NOT modify, disassemble, remove, reinstall or repair the unit yourself as
incorrect dismantling or installation may cause an electrical shock or fire. Contact
your dealer.
▪In case of accidental refrigerant leaks, make sure there are no naked flames. The
refrigerant itself is entirely safe, non-toxic and mildly flammable, but it will
generate toxic gas when it accidentally leaks into a room where combustible air
from fan heaters, gas cookers, etc. is present. Always have qualified service
personnel confirm that the point of leakage has been repaired or corrected
before resuming operation.
INFORMATION
The following figures are just examples and may NOT completely match your system
layout.
a
e
f
g
b
c
d

3 | About the system
User reference guide
11
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
aAir inlet
bAir outlet
cFront panel
dIndoor unit display
eAir filter
fTitanium apatite deodorising filter
gSilver particle filter
3.1.1 Indoor unit display
ON/OFF
a
b
c
d
aSignal receiver
bOperation lamp
cTimer lamp
dON/OFF button
ON/OFF button
If the wireless remote control (user interface) is missing, you can use the ON/OFF
button on the indoor unit to start/stop operation. When operation is started using
this button, the following settings are used:
▪Operation mode = Automatic
▪Temperature setting = 25°C
▪Airflow rate = Automatic
3.2 About the user interface
Wireless remote control
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
▪Direct sunlight. Do NOT expose the wireless remote control to direct sunlight.
▪Dust. Dust on the signal transmitter or receiver will reduce sensitivity. Wipe off
dust with a soft cloth.
▪Fluorescent lights. Signal communication might be disabled if fluorescent lamps
are in the room. In that case, contact your installer.
▪Other appliances. If the wireless remote control signals operate other
appliances, move the other appliances, or contact your installer.
▪Curtains. Make sure that curtains or other objects do NOT block the signal
between the unit and the wireless remote control.

3 | About the system
User reference guide
12
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
NOTICE
▪Do NOT drop the wireless remote control.
▪Do NOT let the wireless remote control get wet.
3.2.1 Components: Wireless remote control
ARC480A78
b
l
k
c
d
e
f
j
i
h
g
a
aSignal receiver
bOFF button
cFan setting button
dEcono operation button
eSwing buttons
fTimer setting buttons (ON, OFF, cancel)
gPowerful operation button
hComfort operation button
iTemperature adjustment button
jOperation mode buttons
kAutomatic operation mode button
lLCD display
3.2.2 Status: Wireless remote control LCD
Icon Description
Operation mode = Automatic
Operation mode = Drying
Operation mode = Heating
Operation mode = Cooling

3 | About the system
User reference guide
13
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
Icon Description
Operation mode = Fan only
Powerful operation is active
Econo operation is active
The indoor unit receives a signal from the wireless remote
control
Current temperature setting
Airflow rate = Automatic
Airflow rate = Indoor unit quiet
Airflow rate = High
Airflow rate = Medium high
Airflow rate = Medium
Airflow rate = Medium low
Airflow rate = Low
Comfort operation is active
Automatic vertical swing is active
Automatic horizontal swing is active
ON timer is active
OFF timer is active
3.2.3 To operate the wireless remote control
a
aInfrared signal receiver
1Aim the signal transmitter at the infrared signal receiver on the indoor unit
(maximum distance for communication is 7m).
Result: When the indoor unit receives a signal from the wireless remote control,
you will hear a sound:
Sound Description
Beep-beep Operation starts.
Beep Setting changes.
Long beep Operation stops.

4 | Before operation
User reference guide
14
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
4 Before operation
4.1 Overview: Before operation
This chapter describes what you have to do before operating the unit.
Typical workflow
Before operation usually consist of the following stages:
▪Inserting the batteries in the wireless remote control.
▪Fixing the wireless remote control to the wall.
▪Turning on the power supply.
4.2 To insert the batteries
The batteries will last for about 1 year.
1Remove the back cover.
2Insert both batteries at once.
3Put the cover back.
2
3
1
AAA.LR03
4.3 To mount the wireless remote control holder
c
ba
2×
aWireless remote control
bScrews (field supply)
cWireless remote control holder
1Choose a place where the signals reach the unit.
2Attach the holder with screws to the wall or a similar location.
3Hang the wireless remote control on the holder.

4 | Before operation
User reference guide
15
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
4.4 To turn on the power supply
1Turn the circuit breaker on.
Result: The flap of the indoor unit will open and close to set the reference position.

5 | Operation
User reference guide
16
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
5 Operation
5.1 Operation range
Use the system in the following temperature and humidity ranges for safe and
effective operation.
Operation mode Operation range
Cooling(a)(b) ▪Outdoor temperature: –10~48°C DB
▪Indoor temperature: 18~32°C DB
▪Indoor humidity: ≤80%
Heating(a) ▪Outdoor temperature: –15~24°C DB
▪Indoor temperature: 10~30°C DB
Drying(a) ▪Outdoor temperature: –10~48°C DB
▪Indoor temperature: 18~32°C DB
▪Indoor humidity: ≤80%
(a) A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b) Condensation and water dripping might occur if the unit runs outside its operation range.
5.2 When to use which feature
You can use the following table to determine which features to use:
Feature Tasks
Basic features
Operation modes and
temperature
To start/stop the system and to set the
temperature:
▪Heat up or cool down a room.
▪Blow air in a room without heating or cooling.
▪Decrease the humidity in a room.
▪In Automatic mode, automatically select an
appropriate temperature and operation
mode.
+ Airflow direction To adjust the airflow direction (swing or fixed
position).
Airflow rate To adjust the amount of air blown into the
room.
To run more quietly.
Advanced features
Econo To use the system when you are also using
other power-consuming appliances.
To save energy.

5 | Operation
User reference guide
17
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
Feature Tasks
Comfort To provide a comfortable airflow that does NOT
come in direct contact with people.
Powerful To cool down or heat up the room quickly.
ON timer + OFF
timer
To automatically turn ON or OFF the system.
5.3 Operation mode and temperature setpoint
When. Adjust the system operation mode and set the temperature when you want
to:
▪Heat up or cool down a room
▪Blow air in a room without heating or cooling
▪Decrease the humidity in a room
What. The system operates differently, depending on the user selection.
Setting Description
Automatic The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
Drying The system decreases the humidity in a room.
Heating The system heats up a room to the temperature
setpoint.
Cooling The system cools down a room to the
temperature setpoint.
Fan The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
Additional info:
▪Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.

5 | Operation
User reference guide
18
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
5.3.1 To start/stop operation mode and to set the temperature
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Heating
: Operation mode = Cooling
: Operation mode = Fan only
: Shows the set temperature.
1Start operation by pressing one of the following buttons.
Mode Press Result
Automatic operation
The operation lamp lights up.
Cooling operation
Drying operation
Heating operation
Fan only operation
2Press or on the button one or more times to set the temperature.
You CANNOT adjust the temperature in drying or fan only operation mode.
Cooling operation Heating operation Automatic
operation
Drying or fan only
operation
18~32°C 10~30°C 18~30°C —
3Press to stop operation.
Result: The operation lamp goes off.
5.4 Airflow rate
1Press to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
INFORMATION
▪If the unit reaches the temperature setpoint in cooling or heating mode, the fan
will stop operating.
▪When using drying operation mode, you CANNOT adjust the airflow rate setting.
5.4.1 To adjust the airflow rate
1Press to change the airflow setting as follows:

5 | Operation
User reference guide
19
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
5.5 Airflow direction
When. Adjust the airflow direction as desired.
What. The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving horizontal blades (flaps) or
vertical blades (louvers).
Setting Airflow direction
Vertical automatic swing Moves up and down.
Horizontal automatic
swing
Moves from side to side.
+ 3-D airflow direction Moves alternately up and down and from side
to side
[—] Stays in a fixed position.
The movable range of the flap varies according to the operation mode. The flap will
stop at the upper position when the airflow rate is changed to low during the up
and down swing setting.
a
b
c
aFlap range in cooling or drying operation
bFlap range in heating operation
cFlap range in fan only operation
CAUTION
▪ALWAYS use a user interface (e.g. wireless remote control) to adjust the angle of
the flap. When the flap is swinging and you move it forcibly by hand, the
mechanism will break.
▪Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at
high speed.
5.5.1 To adjust vertical airflow direction
1Press .
Result: appears on the LCD. The flaps (horizontal blades) will begin to
swing.
2To use fixed position, press when the flaps reach the desired position.
Result: disappears from the LCD. The flaps will stop moving.

5 | Operation
User reference guide
20
FTXP20~35N5V1B9 + ATXP20~35N5V1B9
Daikin room air conditioner
4D520466-17M – 2023.08
5.5.2 To adjust horizontal airflow direction
1Press .
Result: appears on the LCD. The louvers (vertical blades) will begin to
swing.
2To use fixed position, press when the louvers reach the desired position.
Result: disappears from the LCD. The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the direction of the louvers should
be facing away from the wall. Efficiency will drop if a wall blocks the air.
5.5.3 To use 3D airflow direction
1Press and .
Result: and appear on the LCD. The flaps (horizontal blades) and
louvers (vertical blades) will begin to swing.
2To use fixed position, press and when the flaps and louvers reach
the desired position.
Result: and disappear from the LCD. The flaps and the louvers will
stop moving.
5.6 Comfort airflow operation
This operation can be used in heating or cooling operation mode. It will provide a
comfortable wind that will NOT come in direct contact with people. The system
automatically sets the fixed airflow position upward in Cooling and downward in
Heating operation mode.
Cooling operation mode Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at the same time. The last
selected function takes priority. If the vertical automatic swing is selected, Comfort
airflow operation will be cancelled.
5.6.1 To start/stop Comfort airflow operation
1Press to start.
Result: The flap position will change, is displayed on the LCD, and the
airflow rate is set to automatic.
Mode Position of flap…
Cooling/Drying Up
Heating Down