Daikin Madoka BRC1HHDW User manual

Madoka for Daikin Altherma 3
Remote control BRC1HHD(W/S/K)
quick start guide
a
ON/OFF
To turn heating/cooling or domestic hot water ON/OFF
b
To OK, confirm or enter the thermostat menu.
› From the home page, press briey to change the page (from heating/
cooling to DHW, for example).
› From the home page, press and hold to access the thermostat menu.
› From the menu, press briey to return to the selected tab.
› Under a tab, press briey to conrm a function, value or setting.
c
This button is used to move through menus or to change settings.
› To reduce the set temperature from the heating/cooling
or DHW settings pages.
› To scroll to the left in the menu.
› To change a function, value or setting from a menu tab.
d
To scroll through menus and change settings.
› To increase the set temperature from the heating/cooling or DHW
pages.
› To scroll to the right in the menu.
› To change a function, value or setting from a menu tab.
ON/OFF
ON/OFF
ON/OFF
Heating/cooling
page
DHW page
DHW BOOSTER
page
Press the button
briefly to move from
one page to another.
Available Home Pages
ON/OFF

Press the button
ON/OFF
from the heating/cooling or DHW
page.
If the thermostat was on, the remote control will display the
icon.
If the page was already , pressing the
ON/OFF
button will
cancel the icon. The thermostat will start the heat pump if the
set temperatures have not been reached.
1Access the booster mode home page by pressing the
button.
2 Surround the symbol by pressing the button.
1From the heating/cooling or
DHW page, press the or
button to read the set
temperature in heating/
cooling or DHW mode
(depending which page you
are on).
2Use the or buttons to
change the set temperature.
3
Press the button to save the changed set temperature.
1
Press and hold the button to
enter the menu.
2Use the or buttons to scroll
to the icon.
3
Press the button to enter
the mode selection tab.
4
Select the desired mode (automatic, heating or cooling)
by navigating with the or buttons and confirm with
the button.
3Confirm by pressing the button.
Cooling mode will not be available unless the reversible kit has been installed on the heat pump.
Contact the installer if you have any questions.
To Turn Heating/Cooling
or DHW On Or O
To Activate DHW Booster Mode
To Modify The Heating/Cooling
Or DHW Set Temperature
To change operating mode
(heating/cooling)
The present publication is drawn up by way of information only and does
not constitute an offer binding upon Daikin Europe N.V. Daikin Europe N.V.
has compiled the content of this publication to the best of its knowledge. No
express or implied warranty is given for the completeness, accuracy, reliability
or fitness for particular purpose of its content and the products and services
presented therein. Specifications are subject to change without prior notice.
Daikin Europe N.V. explicitly rejects any liability for any direct or indirect
damage, in the broadest sense, arising from or related to the use and/or
interpretation of this publication. All content is copyrighted by Daikin Europe
N.V.
Daikin Europe N.V. Naamloze Vennootschap Zandvoordestraat  ·  Oostende · Belgium · www.daikin.eu · BE    · RPR Oostende (Publisher)
ECPEN19-708 06/19