Daiwa LEGACY DWA-9100 User manual

OPERATION MANUAL DWA-9100

CONTENTS
Thank you for purchasing the Legacy Massage Lounger (DWA-9100).
Before using this chair for the first time, please read through all sections of
this User Manual carefully. Pay special attention to the Important Safety
Instructions.
SAFETY PRECAUTIONS
PARTS
Exterior Parts
Interior Parts
Fuse Box
Controller
MASSAGE CHAIR OPERATION
Controller Operation
Display Screen Operation
SETUP INSTRUCTIONS
Setting Up the Chair
Moving the Chair
Turning On Power
Massage Chair Placement
Floor Protection
Before Using the Chair for the First Time
Bluetooth
After Each Use
Grounding
MAINTENANCE AND STORAGE
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
1
3
3
3
4
5
6
6
7
12
12
17
17
18
18
19
19
20
20
20
22
22

SAFETY PRECAUTIONS
Improper operation may cause injury to users or permanent damage
to the chair.
This massage chair is NOT suitable for individuals who are:
• Suffering from skin disease or injuries to the skin
• Running a fever of over 100ºF
Individuals currently undergoing the following conditions should
consult a doctor before using this chair:
• Pregnancy
• Menstruation
• Treatment for injuries or disorders
• Fever with a temperature of over 100°
• Cardiac disorders, heart disease, or other acute illnesses
• Osteoporosis or fractures in the spine
• Presence of any tumors in the body
• Usage of a pacemaker or any other internal medical device
• Do not continue using the chair for more than 20 minutes per
session. Do not massage any one part of the body for more
than 5 minutes at a time.
• Place the massage chair on a flat, level surface, with
adequate room all around.
• Avoid exerting excessive force on the backrest or legrest
while adjusting their positions. Keep all children and pets a
safe distance from the chair during this adjustment.
• This chair should not be used by more than one individual at
a time.
• Children and any individuals who are mentally disabled should
be supervised when using this chair.
• When detaching the plug from the wall outlet, grasp the plug
itself rather than pulling on the cord.
• Before using this chair for the first time, please inspect it for
any fabric damage. If damage is detected, do not operate
this chair. Immediately contact the manufacturer for repair.
• Do not allow more than one person to use this chair at any
time.
• To avoid electric shock, never connect or disconnect the
power plug with wet hands.
• To prevent damage or fire, do not use any power supply other
than one with the specified electric voltage for this chair.
1

SAFETY PRECAUTIONS
• Do not twist or pull on the power cord, nor crush it with any
heavy object.
• If the power cord becomes damaged, shut off power
immediately and disconnect the plug. Discontinue use and
contact the manufacturer for repair or replacement.
• Immediately after each use, and before cleaning, switch off
power and remove the power plug from its wall outlet.
• Please do not exert excessive force when adjusting the
footrest or backrest.
• Do not place heavy objects on top of the controller.
• This chair is designed for individuals weighting 265 lbs. or
less. Do not burden the chair with excessive weight.
• Never operate this unit in conjunction with any other medical
apparatus or electric device.
• If you experience any abnormal discomfort while using this
unit, shut off power immediately and consult a doctor.
• This unit has been designed for personal, non-commercial
use. Do not use this chair to treat medical illnesses.
• This chair is equipped with a heat function. Individuals not
able to sense heat should apply caution during use.
• To prevent discomfort, avoid using this chair immediately
after meals.
• Avoid operating the chair when you are drunk or feeling
unwell.
• Do not fall asleep on the chair while its programs are running.
• For cleaning, avoid using harsh or abrasive substances, such
as chemically-treated sprays or solutions. Never spray
pesticide onto the unit. Use a high-quality leather cleaner
only.
• To avoid personal injury and damage to the chair, never sit on
the backrest, armrest, or footrest.
• Do not smoke while using this massage chair.
• Avoid operating the chair during rain and thunderstorms.
• Detach the power plug from it electrical outlet before
performing any maintenance.
• Do not allow children to play with controls on the chair. Do
not use wet hands to grasp the power plug.
• When the chair is not in use, switch off power and remove the
power plug from its wall outlet. 2

PARTS
Internal Structure
External Structure
Pillow
Back cushion
Speakers
Armrest
Seat cushion
Legrest
Back Cover
Caster
Massage mechanism
Shoulder airbags
Arm airbags
Back heating pad
Seat airbags
Seat heating pad
Calf airbags
Foot airbags
Foot roller massage
nodes
3

PARTS
Fuse Box
Controller port
Power supply socket
Safety fuse
Power on/off
• To prevent possible electric shock, do not let children play on
the chair.
• After finishing each massage session, and whenever the chair
is not in use, shut off power and remove the power plug from
the wall outlet.
• Do not operate the chair during thunderstorms.
• If the chair will be unused for an extended period of time,
please place it into storage.
4

PARTS
Controller
Display screen
Power button
Menu button
Up key
Left key
Down key
Heat button
Footrest up
Footrest down
Shoulder
adjustment keys
Auto mode
button
Right key
Airbag button
Okay button
Backrest up
Backrest
down
Zero Gravity
button
5

Power Button
• Press to turn on the unit.
The display screen will light up.
Press the Up or Down key to highlight your
preferred massage mode and preference.Press
[ ] to select.
• Press [Power button] again to turn off all functions.
The default running time is 15 minutes for each
MASSAGE CHAIR OPERATION
Controller Operation
Menu Button
• During any massage operation, press here to:
1. Select and switch to a direct massage function
2. Add or end an option to run with your current
massage program
Shoulder Position Adjustment keys
• While the Point mode manual program in running,
use these keys to adjust your desired position of
the point massage.
Auto mode button
• Press this button to bring up the chair’s six auto-
matic massage programs.
Direction dial
• After pressing the Menu or Auto mode buttons, use
the Up, Down, Left, or Right direction keys to move
among selections. Then press the center OK key to
confirm that selection.
Heat button
• Press this key to start the heat function. A
corresponding light will illuminate.
• Press this key again to turn off the heat function.
Airbag button
• To adjust your airbag massage location and
pressure, first press this button. Then use the Up,
Down, Left, or Right arrow keys to specify your
massage location and adjust your desired pressure. 6

MASSAGE CHAIR OPERATION
Display Screen Operation
Automatic Programs
Press [ ], followed by [ ] to bring up the Automatic
Programs menu.
Use the Up or Down keys to highlight one of six automatic massage
programs:
RECOVERY (Warm up)
EXTEND (Stretch)
RELAX (Cool down)
REFRESH (Light massage)
UPPER BODY AUTO (Focused massage on the upper body)
LOWER BODY AUTO (Focused massage on the lower body)
Press [ ] to select.
Footrest Up button
• Press and hold to raise the footrest. Release the
button when it reaches your desired position.
Footrest Down button
• Press and hold to lower the footrest. Release the
button when it reaches your desired position.
Backrest Up button
• Press and hold to raise the backrest. Release the
button when it reaches your desired position.
Backrest Down button
• Press and hold to lower the backrest. Release the
button when it reaches your desired position.
7

Manual Options
Press [ ] and scroll down to the Manual option. {diagram A}
Press [ ] to select.
Press [Up or Down arrow keys] to highlight your desired massage
option. {diagram B}
Press [Right arrow key] to select and move on to the next menu.
Press [Up or Down arrow keys] to highlight the specific part of the
body you wish to massage. {diagram C}
MASSAGE CHAIR OPERATION
DF
ABC
Press [Right arrow key] to select and move on to the next menu.
Press [Up or Down arrow keys] to highlight your desired width of the
massage rollers: WIDE, MEDIUM, or NARROW. {diagram D}
Press [Right arrow key] to select and move on to the next menu.
Press [Up or Down arrow keys] to highlight your desired massage
roller speed: between 1 and 3, or OFF. {diagram F}
Press [Right arrow key] to select and move on to the next menu.
8

Heat Option
To turn on or off the unit’s HEAT function:
Press [] and scroll down to the Heat selection. {diagram K}
Press [Up or Down arrow keys] to highlight ON or OFF. {diagram L}
Airbag Massage
Press [ ] and scroll down to the Airbag option. {diagram G}
Press [ ] to select.
Upon highlighting PART, press [Up or Down arrow keys] to select one
of the following options:
Full
Arms & Shoulders
Legs and Feet
Buttocks
Press [Right arrow key] to lock in your selection. {diagram H}
Use arrow keys to highlight FORCE. Press [Up or Down arrow keys]
to select your desired strength of airbag massage, from 1-5, or select
OFF to turn off airbag massage. {diagram J}
MASSAGE CHAIR OPERATION
G H
KL
J
9

System Settings
Press [] and scroll down to the Settings option. Here you can
set the length of time for each massage, the language on the display
screen, and Bluetooth functions. {diagram P}
Roller Massage Option
Press [ ] and scroll down to the Roller option. {diagram M}
Press [ ] to select.
Press [Up or Down arrow keys] to select one of the following speeds:
1, 2, 3, or OFF. {diagram N}
MASSAGE CHAIR OPERATION
To set the duration of each massage:
With TIME highlighted, press [Up or Down keys] to select your desired
length of time for each massage: 10, 20, or 30 minutes. Press [ ]
to select. {diagram Q}
With LANGUAGE highlighted, press [Up or Down keys] to select your
desired language to appear on the display screen. {diagram R}
Note: the Roller Speed cannot be adjusted while the Full Body
Airbag massage is running.
MN
P Q R
10

Notes:
1. After making any selections within the Automatic Mode or
Manual Mode menus, pressing [ ] twice in a row will
being the screen back to the initial screens for the
Automatic Mode and Manual Mode.
MASSAGE CHAIR OPERATION
2. With the exception of the “Lower Auto” option, each
automatic program will begin with the movement of
massage nodes along the backrest, in order to pinpoint the
user’s shoulder position
• To avoid malfunction, damage, or injury to persons, do not
attempt to disassemble this massage chair.
• To avoid possible damage, keep water and other liquids away
from the controller.
• Do not crush the controller or power cord under any heavy
object.
With BLUETOOTH highlighted, press [Up or Down keys] to begin or
end Bluetooth functions.
11

SETUP INSTRUCTIONS
Setting Up the Chair
1. Carefully lift the chair and all its parts from their packaging.
Remove any protective wrapping. Locate the packing list.
Check to make sure that all parts are present.
2. Install the Legrest.
a. Locate the coupling shafts on the right and left sides of
the massage chair’s seat. Locate the corresponding
hooks on either side of the legrest. Align and lock one
side into place, then the other side.
Coupling shaft
Hook
12

Lock
Lock
Connecting axis
Airtube plug
Air tap port
Air valve port
Air valve plug
SETUP INSTRUCTIONS
c. Lift up the legrest to connect the airtube and air valve
plug with their corresponding ports on the base of the
seat. Fasten securely.
b. Fasten both sides by pushing the lock down onto the
connecting axis. (See figure below.)
13

Side zippers
Calf zippers
Airtube port
Heating port
SETUP INSTRUCTIONS
3. Connect the back cushion to the backrest.
a. Place the back cushion onto backrest of the chair.
Fasten with the zipper on each side.
b. Then draw the zipper on top of the backrest and back
cushion closed.
c. Likewise, use the zipper to connect the PU on the calf
massage unit with the seat.
d. According to the diagram, connect the port on the
heating pad to the air tube port.
14

Hook
Connecting
rod
Screw
Armrest unit
Armrest frame
Side port
Air pipe plug
4. Install the armrest
a. Align the hook on the armrest with the corresponding
connecting rod on the backrest (diagram 1). Push
down to lock it into place.
b. Fasten the armrest to the seat frame with one screw on
the corresponding side of the chair.
c. Align and fasten the air valve and air pipe plugs on the
armrest to the side ports on the lower portion of the
armrest frame (diagram 3).
SETUP INSTRUCTIONS
15

Controller
Power
cord
Power cord port
Power cord connector
Controller plug
Power switch
5. Install miscellaneous parts
a.Insert the end of the cord from the controller into its
corresponding port on the fuse box.
b. Connect one end of the power cord with its
corresponding port on the fuse box.
c. Finally, plug the power cord into a power outlet and turn
on the power switch. Press [ ] on the controller to
begin operation.
SETUP INSTRUCTIONS
16

• Do not attempt to move the chair while someone is still sitting
on it.
• While moving the chair, always grasp its backrest. No not try
to move the chair by grasping its armrests.
Turning on Power
• Plug the power plug into a well-grounded,
three-pronged power outlet.
• Flip on the power supply switch, located
on the back of the massage chair, at the
bottom of the backrest,
• Before plugging it in, inspect the entire power cord and plug
for any possible damage. Make sure that no electrical wires
are exposed.
• Make sure that the power supply switch is turned OFF before
inserting the power plug into a wall outlet.
SETUP INSTRUCTIONS
Moving the Chair
• Make sure that the backrest is in its highest upright position.
• Shut off power and remove the power plug from the wall
outlet.
• Standing behind the back of the chair, grasp its backrest and
tilt it downward, so that the front of the chair rises off of the
floor. Push the chair to the location you desire.
17

Massage Chair Placement
When looking for a location to place your massage chair, keep
following in mind:
1. The chair takes up significantly more space when stretched out
than when in an upright position. With the chair upright, allow
at least 20 inches of open space behind the backrest, and at
least 16 inches of space in front of the footrest.
2. To prevent wearing out the floor beneath the chair, we advise
placing some cushioning material, such as a rug or plastic
mat, underneath the chair.
3. To prevent possible electrical leakage, do not place the
massage chair in or near a damp environment, such as a
bathroom.
4. To prevent fire or damage to its leather material, keep the
massage chair away from any sources of heat (such as a
stove or furnace).
5. To prevent signal interference, please keep a distance of at
least 3 feet between the chair and any television set, radio, or
other audio and video devices.
16 in.
20 in.
Massage chair
Floor
Carpet
SETUP INSTRUCTIONS
18