Dakota Digital HLC-2162 User manual

Manual # 650694
HLC-2162
Dakota Digital Clock Installation
2-1/16 Universal Clock
Installation
Installation Manual
HLC Clock
(2) Thumb Nuts
(2) Long L-Bracket
HLC-2162 Includes:
Harness
1. Using the provided template or a hole saw, make an opening measuring 2.10” diameter for
the clock in your desired mounting location. Ensure at least 3.20” of depth behind the
gauge opening for adequate clearance.

Manual # 650694
2. Insert the HLC gauge into the opening, making sure it’s aligned properly. Then, secure the gauge with
the supplied L-brackets and thumb nuts.
3. Connect the main cable to the back of the clock.
4. Refer to the enclosed clock operating manual for these connections and clock setup.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov