Dakota Digital HLC-69F-MUS User manual

Manual # 650585
HLC-69F-MUS
Dakota Digital HLC Clock Installation
For 1969-70 Ford Mustang
Your new HLC-69F-MUS kit includes:
Installation
2X 3/8” Screws
Harness
Installation Manuals
HLC Clock
1. Remove the eight (8) screws
securing the clock panel to the dash.

Manual # 650585
2. Remove the gauge, bezel spacer, and lens
from the clock panel.
3. Using the supplied 6-32 x 3/8” screws, attach the factory spacer to the stand-offs.
4. Attach the clock to the clock panel using the three factory screws from disassembly.

Manual # 650585
4510 W. 61st St. N., Sioux Falls SD 57107
Phone: [phone] Fax: [phone]
www.dakotadigital.com
[email protected]
5. Connect the clock harness to the back of the clock. Route the other end of this harness to
the HDX control box.
6. Reinstall the assembly in to the dash and refer to the Operation Manual to complete the clock setup.