Danby DPA100B2WDB Assembly instructions

Danby Products Limited, Ontario, Canada N1H 6Z9
Danby Products Inc., Findlay, Ohio, USA 45840
-ODELs-ODÕLEs-ODELO
13.03.14
OWNER’S USE AND CARE GUIDE
GUIDE D’UTILISATION ET D’ENTRETIEN
PORTABLE AIR CONDITIONER
CLIMATISEUR PORTATIF
MODEL MODÈLE DPA100B2WDB

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF
PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE
REFERENCE.
-------------------------------------------------------------------------------------------------------------------
POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE
PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE
POUR RÉFÉRENCE FUTURE.
-------------------------------------------------------------------------------------------------------------------
This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must
be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and
applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the
responsibility and obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground prong should not,
under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show
any sign of damage. Do not use your appliance with an extension cord unless it has been checked and test-
ed by a quali¿ed electrician or electrical supplier.
IMPORTANT - GROUNDING METHOD
Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ¿ches. Il doit être
branché dans une prise avec une ¿che de mise à la terre en conformité avec le Code national de l’électricité
et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la
responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code
national de l’électricité et aux codes et règles locaux applicables. La ¿che de mise à la terre ne doit pas, en
aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le
cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été
véri¿ée et testée par un électricien quali¿é ou un fournisseur de matériel électrique.
IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

PORTABLE AIR CONDITIONER
Owner’s Use and Care Guide
Welcome .............................................................
Safety Instructions ..............................................
Identifying Parts ..................................................
Features ..............................................................
Operating Instructions .........................................
Installation Instructions .......................................
Care and maintenance ........................................
Troubleshooting ...................................................
Warranty ..............................................................
CLIMATISEUR PORTATIF
Guide d’utiliser et soin de propriètaire
Bienvenue ...........................................................
Consignes de sécurité importantes .....................
L'Identification des pièces ....................................
Caractéristiques ..................................................
Consignes d’utilisation ........................................
Instructions d’installation .....................................
Soins et entretien ................................................
Dépannage .........................................................
Garantie ..............................................................
Contents
2
3-4
4-6
6-7
8-9
10-14
15
16
17
18
19-20
21-22
23
24-25
26-30
31
32
33
CAUTION:
PRECAUTION:
Read and follow all safety rules and
operating instructions before first use of this
product.
Veuillez lire attentivement les consignes de
sécurité et les instructions d’utilisation avant
l’utilisation initiale de ce produit.
Model Modèle
DPA100B2WDB
1
Table des matières

Welcome
2
Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will
¿nd in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of
all, you will experience these values each and every time you use your Danby appliance. That is important, because your
new appliance will be a part of your family for a long time.
Note the information below; you will need this information to obtain service under warranty.
To receive service, you must provide the original receipt.
Model No:
Serial No:
Date Purchased:
NEED HELP?
Before you call for service, here are a few things you can do to
help us serve you better:
Read this Owner’s Use and Care Guide:
It contains instructions to help you use and maintain your
appliance properly.
If you received a damaged appliance:
Immediately contact the retailer (or builder) that sold you the
appliance.
Save time and money:
Check the Troubleshooting section at the end of the guide
before calling. This section helps you solve common problems
that may occur.
If you do need service, you can relax, knowing help is only a
phone call away.
Tel: 1-800-26-
(1-800-263-2629)
WARNING
Improper connection of the grounding plug can result in risk of
¿re, electric shock and/or injury to persons associated with the
appliance. Check with a quali¿ed service representative if in doubt
that the appliance is properly grounded.

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY
PRECAUTIONS
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation resulting from to ignoring these instructions may cause harm or damage.
Your air conditioner should be used in such a way that it is protected
from moisture. e.g. condensation, splashed water, etc. Do not place or
store your air conditioner where it can fall or be pulled into water or
any other liquid. Unplug unit immediately if this occurs.
Always transport your air conditioner in a vertical position and place
on a stable, level surface during use.If the unit is transported laying
on it’s side it should be stood up and left unplugged for 4 hrs.
Turn off the unit when not in use.
Always contact a qualified person to perform repairs. If the power cord
is damaged it must be repaired by a qualified technician.
Keep clearance of at least 30cm (1 foot) all around the unit from walls,
furniture and curtains, to allow for adequate air flow.
If the air conditioner is knocked over during use, turn off the unit and
unplug it immediately.
Always use the switch on the control panel to turn the unit on or off.
ALWAYS DO THIS
Do not operate your air conditioner in a wet room such as a bathroom
or laundry room.
Do not touch the unit with wet or damp hands.
Do not press the buttons on the control panel with anything other than
your fingers.
Do not remove any fixed components. Never use this appliance if it is
not working properly, or if it has been dropped or damaged.
Never use the plug to start and stop the unit.
Do not cover or obstruct the inlet or outlet grilles.
Do not use hazardous chemicals to clean or come into contact with
the unit. Do not use the unit in the presence of inflammable
substances or vapour such as alcohol, insecticides, petrol,etc.
Do not allow children to operate the unit unsupervised.
Do not use this product for functions other than those described in this
instruction manual.
NEVER DO THIS
3
Portable air conditioners exhaust large amounts of room air. Always
ensure an adequate supply of make-up air to operate efficiently.

Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation resulting from to ignoring these instructions may cause harm or damage.
ENERGY SAVING
TIPS
Use the unit in the recommended room size.
Locate the unit where furniture cannot obstruct the air flow.
Keep blinds/curtains closed during the sunniest part of the day.
Keep the filters clean.
Keep doors and windows closed to keep cool air in and warm air out
(cooling mode).
OPERATING
CONDITION
The air conditioner must be operated within the temperature range
indicated below:
TOOLS FOR WINDOW
KIT INSTALLATION
1. Screwdriver (medium size, Phillips)
2. Tape measure or ruler
3. Knife or scissors
4. Saw (In the event that the window kit needs to be cut down in size
because the window is too narrow for direct installation).
See www.danby.com for general instruction guide.
Identifying Parts
WARNING
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
Avoid fire hazard or electric shock. Do not use an extension cord
or an adaptor plug. Do not remove any prong from the power
cord.
ELECTRICAL
INFORMATION WARNING
Be sure the electrical supply is adequate for the model you have
chosen. This information can be found on the serial plate, which
is located on the side of the cabinet and behind the grille.
Be sure the air conditioner is properly grounded. To minimize
shock and fire hazards, proper grounding is important. The
power cord is equipped with a three-prong grounding plug for
protection against shock hazards.
Your air conditioner must be used in a properly grounded wall
receptacle. If the wall receptacle you intend to use is not
adequately grounded or protected by a time delay fuse or circuit
breaker, have a qualified electrician install the proper receptacle.
Ensure the receptacle remains accessible after the unit is
installed.
4
MODE
COOL
DRY
*HEAT (heat pump type)
*HEAT (electrical or heat pump)
ROOM TEMPERATURE
17°C (62°F) ~ 35°C (95°F)
13°C (55°F) ~ 35°C (95°F)
5°C (41°F) ~ 30°C (86°F)
<30°C / 86°F
(*) Optional feature, some models may not have this feature.
Note: Performance may be reduced outside of these operating
temperatures.

Identifying Parts
ACCESSORIES
PM
ET
T
U
AO
L
O
O
C
DR Y
T
A
EH
FN
A
H
G
I
H
D
E
M
O
LW
E
DOM FDEEPS
NA
GNIWS
NOR
EMIT
YM
ONOCE
FF
O/N
O
FFOREMIT
RESETLOC K
W
O
L
L
O
F
E
MD
E
L
Y
A
L
P
S
I
D
N
O
I
OBR
UT
PARTS PART NAME QUANTITY
Exhaust hose and Adaptor
B (round mouth) 1 set
Foam seal
Remote Controller and
Battery (For remote control
models only) 1set
Drain hose 1pc
Ensure that all the accessories are included in the package and refer to the installation
instructions for their usage.
NOTE: All the illustrations in this manual are for explanatory purposes only. Your air conditioner
may be slightly different.
UNIT STRUCTURE
1
2
5
3
4
FRONT
1
2
3
4
Control Panel
Horizontal Louver Blade
(adjusts manually)
Carrying Handle
(both sides)
Remote Signal Receptor
Front Panel
Fig.1
5
5
Window Slider Kit and screw 1 set
6pc

Identifying Parts REAR
6
7
8
9
10
11
12
13
Upper Air Filter (behind the grille)
Air Outlet
Castor
Air Intake
Drain Outlet
Air Intake
Lower Air Filter (behind the grill)
Bottom tray drain outlet
Fig.2
Features
ELECTRONIC CONTROL
INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel
and remote controller and all its functions. Select the functions you desire
based on the associated symbol.
The unit can be controlled by the control panel alone or with the remote
controller.
NOTE: This manual does not include Remote Controller Operation. Refer
to the <<Remote Controller Instructions>> packed with the unit for this
information.
Fig.3
6
1
7
4
66
2
3
5
/
8
9
12
11
6
7
13
10

Features
1
ELECTRONIC CONTROL
INSTRUCTIONS
MODE select button
Selects the appropriate operating mode. Each time you press the but-
ton, a mode is selected in a sequence that goes from AUTO, COOL,
TIMER button
Used to initiate the AUTO ON start time and AUTO OFF stop time pro-
gram, in conjuction with the up arrow & down arrow buttons.
POWER button
Turns power on/off.
SLEEP button
Used to initiate the SLEEP operation.
FAN button
UP and DOWN buttons
Used to adjust (increase /decrease) temperature settings (1°C/2°F
increments) in a range of 17°C(62°F) to 30°C(86°F) or the TIMER set-
ting in a range of 0~24hrs. The control is capable of displaying
temperature in degrees Fahrenheit or degrees Celsius. To convert
from one to the other, press and hold the Up and Down buttons at the
same time for 3 seconds.
LED Display
Shows the set temperature in °C or °F and the Auto-timer settings.
While on DRY and FAN modes, it shows the room temperature.
Also displays the following error codes:
E1 -Room temperature sensor error-Unplug the unit and plug
it back in. If error repeats, call for service.
E2 - Evaporator temperature sensor error- Unplug the unit and
plug it back in. If error repeats, call for service.
-Display panel communication error - Unplug the unit and
plug it back in. If error repeats call for service.
P1 -Bottom tray is full - Connect the drain hose and drain the
collected water away. If error repeats, call for service.
2
3
4
5
7
7
6
DRY, FAN and HEAT (not available on cooling only models). The mode
indicator light corresponding to the chosen setting lights up.
Controls the fan speed. Press to toggle between two fan speeds: LOW
(press 1 time) and HIGH (press 2 times). The fan speed indicator light
indicates the corresponding fan setting. Press the button a third time to
initiate AUTO-FAN mode. In this mode, both indicator lights will light up.
E4

Operating Instructions
OPERATING MODES COOL mode
- Press the "MODE" button until the "COOL" indicator light comes on.
- Press the up / down arrows to select your desired room temperature.
The temperature can be set within a range of 17°C-30°C / 62°F-86°F.
- Press the "FAN SPEED" button to choose the fan speed.
DRY mode
- Press the "MODE" button until the "DRY" indicator light comes on.
- Under this mode, you cannot select a fan speed or adjust the
temperature. The fan motor operates at LOW speed.
- Keep windows and doors closed for the best dehumidifying effect.
- Do not use the window hose under this mode.
AUTO mode
- When you set the air conditioner in AUTO mode, it will automatically
select cooling, heating (applicable models only) or fan only operation
depending on what temperature you have selected and the room
temperature.
- The air conditioner will adjust the room temperature automatically to
the temperature point set by you.
- Under AUTO mode, you can not select the fan speed.
FAN mode
- Press the "MODE" button until the "FAN " indicator light comes on.
TIMER mode
- To initiate the TIMER OFF function, press the timer button when the unit
is on. It indicates the Auto Stop program is initiated.
- To initiate the TIMER ON function, press the timer button when the unit
is off. It indicates the Auto Start program is initiated.
- Press and hold the UP or DOWN button to change the Auto-time by half
hour increments, up to 10 hours, then at 1 hour increments up to 24
hours. The control will count down the time remaining until the unit
starts or stops.
- The selected time will program in 5 seconds and the system will
automatically revert back to display the previous temperature setting.
- Turning the unit ON or OFF at any time or adjusting the timer setting
to 0.0 will cancel the Auto Start/Stop timed program.
- When a malfunction (E1, E2, E4, P1) occurs, the Auto Start/ Stop
program will be cancelled.
8
- Press the "FAN SPEED" button to choose the fan speed (1 time for LOW,
2 times for HIGH, 3 times for AUTO-FAN).
- The corresponding fan speed indicator light for each speed lights up. Both
indicators are lit up when AUTO-FAN is selected.
- The temperature cannot be adjusted.
- Do not use the window hose in this mode.
HEAT mode (select models only)
- Press the "MODE" button until the "HEAT" indicator light comes on.
- Press the ADJUST buttons "up" or "down" to select your desired
room temperature. The temperature can be set within a range of
17°C-30°C / 62°F-86°F.
- Press the "FAN SPEED" button to choose the fan speed. For some
models, the fan speed can not be adjusted under HEAT mode.