Polar Electro A370 User manual

Get to know your A370
• You can turn on the display by turning your wrist or pressing the
button on the side.
• Browse through the menus by swiping the touch screen up or
down.
• Choose menu items by tapping them.
• Press the button on the side to go back in menus.
• To change clock faces tap and hold the display in time view and
swipe up or down.
• Press and hold the button in time view until
you see Searching to initiate Polar Flow app
sync and pair an accessory device
Training
My day
Settings
My
heart rate
SET UP WITH A COMPUTER
1. Go to ow.polar.com/start and install Polar FlowSync
data transfer software to your computer.
2. Sign in with your Polar account or create a new one. We’ll
walk you through the sign-up and setup within the web
service.
B
SET UP WITH A MOBILE DEVICE AND POLAR FLOW APP
Please note that you have
to do the pairing in the Flow
app and NOT in your mobile
device’s Bluetooth settings.
1. Make sure your mobile
device is connected to
the Internet and turn on
Bluetooth®.
2. Download the Polar Flow
app from the App Store or
Google Playon your mobile
device.
3. Open Flow app on your
mobile device.
4. Flow app recognizes your A370 nearby and prompts you
to start pairing it. Accept the pairing request and enter
the Bluetooth pairing code shown on the A370 display
to Flow app.
5. Sign in with your Polar account or create a new one.
We’ll walk you through the sign-up and setup within the
app.
6. When you’re done with the settings tap Save and sync and
your settings are synced to your A370.
A
How to get started
You can choose to set up your new Polar A370 either with (A)
a mobile device or with (B) a computer, whichever is the most
convenient for you. The A370 is in storage mode, and it wakes up
in the setup. To get the most accurate and personal training and
activity data, it’s important that you’re precise with the settings in
the setup.
Plug your A370 into a powered USB port or a USB charger with a
standard micro USB cable. It may take a few minutes for your A370
to wake up. Let your A370 charge during the setup.
If there is a firmware update available for your A370, we
recommend you install it during the setup. It may take up to 10
minutes to complete.

MANUFACTURED BY
POLAR ELECTRO OY
PROFESSORINTIE 5
FI-90440 KEMPELE
TEL [phone]
FAX [phone]
WWW.POLAR.COM
COMPATIBLE WITH
Technical specification
BATTERY TYPE 100 MAH LI-POL BAT TERY
HEART RATE SENSOR INTERNAL OPTICAL
WATER RESISTANCE 30 M
MATERIALS WRISTBAND: SILICONE, STAINLESS STEEL,
POLYBUTYLENE TEREPTHAL ATE, GLASS FIBER;
DEVICE: THERMOPLASTIC POLYURETHANE
ACRYLONITRILE BUTADIENE STYRENE, GLASS FIBER,
POLYCARBONATE, STAINLESS STEEL, GLA SS
POLAR A370
FITNESS TRACKER
WITH WRIST-BASED
HEART RATE
English
Getting Started Guide
/polarglobal
Caring for your A370
Wash the A370 and your wrist daily to to avoid any skin irritations.
Dry your wrist and the wrist band before you put it back on. Once in a
while, take the tracker off and let your skin breathe.
After swimming in sea water or heavy sweating, rinse the USB port
under running water and let the USB port dry by leaving the cover
open until it’s properly dry.
Do not plug in the A370 (for a charge or sync) when the USB port is
wet or sweaty.
Charging a wet device damages the USB port, so don’t connect it
even to your computer for a sync when it’s not dried up yet.
Learn more at support.polar.com/en/A370
APP STORE IS A SERVICE MARK OF APPLE INC.
ANDROID AND GOOGLE PL AY ARE TR ADEMARKS OF GOOGLE INC.
IOS IS A TRADEMARK OR REGISTERED TRADEMARK OF CISCO IN THE U.S. AND OTHER
COUNTRIES AND IS USED UNDER LICENSE.
A370 continuously measures heart rate from the wrist, in everyday-
wear and during exercises. To get accurate heart rate readings, nd a
comfortable t for your wrist by following these tips.
In everyday-wear, secure the wrist band on top of your wrist, behind
the wrist bone. Do NOT place the tness tracker on top of the wrist
bone. The band can be slightly loose as long as the sensor on the back
is touching your skin and stays in place when you move.
Tighten the band a little bit when you start a training session, so the
sensor will not move when you exercise. The wrist band should not be
uncomfortably tight either. Remember to loosen the wrist band after
training for a more comfortable t.
How to wear
Nice and tight
17966 489.00 ENG 04/2017 10011