DAS.4 SG30 User manual

Welcome to use our SG30, this is a smart
watch which can help you reach your sport
goals.
The package includes:
· SG22 smart watch
· User Manual
· Charging cable

SETTING UP YOUR SG22
First download & install the app SMART-TIME
PRO, and create an account to make sure the
watch can synchronize the data it collects with
the app. The app is where you can set goals,
analyze your goals, see historical trends and keep
up with friends, and much more.
CONNECTING YOUR SMART WATCH
THROUGH MOBILE PHONE
SMART-TIME PRO APP supports the operang
system of iOS 11.0 and Android 4.4, as well as
Bluetooth 4.0. It is available for more than 150
mobile devices.
.

5. Select the Bluetooth name F2 with the
strongest signal from the list. Then the watch will
show paring noficaon click to confirm pairing
1. Turn on Bluetooth on mobile phone.
2. Download APP: SMART-TIME PRO
3. Aer install the App, register and log in ac-
count according to a series of instrucons.
4. Connue following the onscreen instrucons
to connect or pair your smart watch to your
mobile device. Pairing make sure that the watch
and mobile device can communicate with each
other(sync their data).
Open APP>Device> Add device>Choose F2.

Then you will see the Bluetooth icon on the right
top on the watch or in quick seng page (slide
down page) turns to Blue, then Bluetooth is
connected.
(You need to use Android 4.4+ or iOS 8.0+ and
above and the watch can only be paired with
one mobile phone. To pair other mobile phones,
please unbind the current one before pairing.)

QUIK FIT STRAP
SG30 contains two parts(watch
body and wristband), you can pur-
chase seperately strap and switch
as your preference.
CHARGING INSTRUCTIONS
Charging:
• Turn the watch over,align and
aach the charging pins to the
magnets gold prongs. You will see
the charging icon on the watch
screen aer 5s.
• Charging fully may take 2 hours.
you will see the baery icon is full if
the watch have been fully charged.

• Please clean the charge interface before
charging for fear that the remaining sweat erode
gold metal contact or other risks.

The SG30 watch supports up to 11 sports modes
including: running, walking, cycling, climbing,
treadmills, spinning, yoga, swimming, basketball,
football, badminton.
Wearing SG30 correctly, not too ght or loose,
make sure no green light leak, there is two
measuring ways:

• Turn on the heart rate icon on the
watch and measuring heart rate by
manual.
• Set automac monitoring me in-
terval in app(monitoring once every
15/30/60/120 minutes).
Wear the watch in a right way,and
open the menu--blood pressure,
measure it manual.
Seng the alarms in APP and sync
to watch, maximum 8 alarms.
Control the music player of mobile
phone to play the music,as well
as song switching and volume
adjustment.
3.Blood pressure
4.Alarm clock
5.Music control

Electronic mer that can record
one me or record mulple mes.
The same way to calculate the
remaining me.
This feature can remote control the
mobile camera to take pictures,please
click - smart camera and turn on the
camera
Under Bluetooth connecon, cilck
“Find phone” on the watch, the
phone ringing, click pause to stop.
8.Remote capture
9.Find phone
7.Countdown
6.Stopwatch

Set the watch’s general funcons,
brightness, language, power off,
return to factory, about.
Sports mode records was done,
maximum 10 records, update
automacally.
Wearing F2 corrctly, enter temprer-
ature measure,
it will show your body temprerature
in 1 second,
10.Sengs
11.Sports records
12.Body Temperature
measure

but make sure to get stable data aer you wear
watch correctly for more than 20 seconds. There
will be two datas on screen, smaller data is your
Body surface temperature, bigger data is your
real body temprerature.
1| Change watch face
(Long press the screen or power buon, swipe to
choose, click to confirm)
13.Other funcons

Wristband length 254 mm
Weight 32g
Wristband width 20 mm
Baery 210mAh Poly-Li

Heart-rate signal missing
The SG30 smart watch keeps paying aenon
to your heart rate data during your exercise and
your daily life. Someme the watch may not
get a suitable heart rate signal. At this me, the
missing heart rate data will appear at the doed
line.
If you can’t get the heart rate signal, first
you should confirm that you wear the watch
correctly, adjust it to avoid being too high or too
low, neither too ght or too loose on your wrist.
Aer adjustment, turn on real-me heart rate
monitoring to get the data.
If there is sll no heart rate data, check if the
heart rate monitoring funcon is turned on at
SMART-TIME PRO App.

If your mobile cannot pair the watch, click
Sengs- Bluetooth in your mobile and check if
there is signal of SG30.
If yes, it means there is no problem with the
Bluetooth signal. Please check if the watch is
paired with other phones, please unbind it. IOS
device users should click Seng - Bluetooth -
ignore this device and then pair it.

1.The Heart rate, Blood pressure and Body tem-
perature data output by SG30 are not intended
to be a medical or diagnosc basis.
2. Self-diagnosis and self-treatment are danger-
ous. Only qualified physicians are allowed to
diagnose and treat high blood pressure or any
other heart diseases. Please contact your physi-
cian for more professional diagnosc opinions.
3.The data and informaon of heart rate and
blood pressure provided by SG30 may not
be completely accurate and may exceed the
tolerance as per the specificaon stated in
the document due to diuerent factors, such as
interference with signal from external sources,
incorrect wearing posion and changes in
weather condions or user’s body condion.

4.DO NOT adjust any of your medicaon or
therapeuc schedule based on the results output
by SG30.
Please follow the doctor’s instrucons before
taking any treatment or medicaon.
We disclaim all liability arising from such inaccu-
racy and assumes no responsibility for the
consequences of use of such data and informa-
on.