DAS.4 SL22 User manual

User Manual
SL22

Operaon Guide
Up buon: short press enter pedometer, will
show steps, calories, distance.
Down buon: long press to acvate watch, short
press to return to the standby interface, Long
press to shut down the watch and restart it if the
soware crashes.
Touch panel gestures: slide right/le/up to enter
dierent funcons, aer entering each funcon,
swipe from le to right for return, swipe from
right to le for conrmaon
Watch face switch: long press the screen, there
will be a dial choice, tap to conrm.
Status bar: slide down to enter, it tells Bluetooth
status, baery life, me etc.

Charging instrucon: this product adopts is using
magnec force charging. Supports 5V mobile
phone charger and computer USB interface. Put
the charging cable to the back of the device’s
charging pins, it will charge automacally. It
takes 75 mins to fully charge. Do not use the
watch when charging.
Cauon: You should place the magnec
charger correctly at the pins. If the charger is not
properly aligned with the pins, it will cause the
circuit to burn.
The watch can connect with your phone by
downloading the applicaon “M acve” using
one of the methods below:
1)Android / IOS: Scan the QR code using any
scanner, to download the app “M acve”

2)Android: search and download “M Acve” app
from Google Play.
iOS: search and download “M Acve” app from
App Store.
Bluetooth 4.0 connecon: Aer installaon, turn
on cellphone Bluetooth and M Acve App, con-
rm the nocaons, locaon, all permissions
are enabled, tap Device - Add Device, search
“L19” device and tap connect. Some Android
phones need turn ON GPS to connect.
How to set nocaon: into phone’s Sengs
-App Management, nd “M Acve”-permissions
Management, and turn every permission ON.
What if I do not get the noce?
1. First, make sure that you have enabled all the
nocaons from the app and that you have
given the required permissions. If not, then you
muse enable them.

2. Due to the lack of uniformity of Bluetooth
protocol of various mobile phone brands, some-
mes the Bluetooth connecon between the
mobile phone and the watch is not stable. You
can turn o the Bluetooth of the mobile phone
and reconnect it or restore the watch to factory
Sengs.
3. Delete “M Acve” and download it again. Note
that all permissions should be opened during the
installaon process, and then the watch should
be reconnected.
Main funcons
Calling
Dial: Bluetooth call via cellphone, talk at the
watch end.
Phonebook: Sync the contacts in the cellphone,
up to 200 usual contacts.
Call logs: Sync all the calls history in the cell-
phone.
SMS: Sync the messages in the cellphone maxi-
mum 10 messages No IOS support yet.
Nocaons: When connected, you decide
which nocaons can be pushed from the
phone to your watch. You can select said no-

caons from the app.
Bluetooth: Search the device you want connect
or disconnect the devices.
Pedometer: Recording the steps you walked
during the day, calories burn and distance.
Everyday 0 12 o’clock all the data will be saved
automacally and reset to 0. Slide up enter
opon; status, on and o; history, it can check 7
days local records; Goal, set a target for everyday
steps; put into all your informaon, such as
Gender, Height, Weight etc. for more accurate
measure your steps data.
Sleep monitor: The device turns on sleep mon-
itor automacally from 9p.m to 9a.m. It records
your sleep duraon and quality, help to build a
beer rest me, improve sleep quality. Slide up
enter opons; Status, On and O; History, check
out deep sleep and light sleep; instrucon.
Heart rate monitor: wear the watch ghtly with
your wrist, best posion would be upper of the
hand-wrist, around 20 seconds it will shows the
real me heart rate data, slide down into history,
mode includes single measure and connuous
measure; and instrucon. Normal value is.

60-100 BPM. However, that number can dier.
It depends on your age, gender, and physical
condion. Please consult your doctor.
ECG: Via opcal heart rate and ECG c technol-
ogy.”. 30 seconds aer the measurement the
message “To the App” will appear. That means
that the measurement was saved in your phone’s
app.
Blood pressure: Tap to enter and start. The
measurement. Aer about a minute you will get
a single measurement of your blood pressure.
Sedentary: Set a reminder for you to stand up, to
avoid sing for a prolonged period.
An-lost: Press nd phone. Your phone will start
to vibrate and ring. Once found, press stop on
the watch to end the funcon.
Alarm: Seng 5 alarms maximum, long press
can cancel alarm.
Stopwatch: Single ming, tap the le icon to
start ming, and tap to pause, tap again for
cumulave me.

Calculator
Calendar
Seng: All the sengs here for set as following:
Bluetooth Seng: Turn on/o the Bluetooth in
watch.
Clock: clock type, there are a couple of watch
faces for you to choose from. Time will be synced
once connected with M Acve App.
Wake up screen receives nocaon: You can
set wake up the watch screen when messages
received. Baery working me will be reduced.
Display: Set the screen on me, and brightness
adjustment.
Sound: you can select the caller prole, select
Ringtones, select nocaon ringtones.
Unit: Set metric or. Imperial
Reset: Restore the factory sengs
Languages: When connected, the language will be
the same as your phone’s if supported. You can man-
ually change the language from the watch’s menu.

IP68 – Only dustproof and only
accidental contact with fresh
water – hand washing.
Gesture: Flipping mute call, ipping mute alarm,
gesture wake-up (screen automacally on once
raise hand), and shaking to answer calls.
Warranty
About the fault caused by the user’s personal
reasons, we don’t oer free warranty, as follows:
1). Disassemble or ret the product.
2). Caused by immodesty drop.
3). All arcial damage or misuse (such as: make
water into the host, the external force shaer,
scratch damage of peripheral components, etc.),
all these are beyond the scope of the warranty.
4. When ask for free warranty, you must provide
a warranty card with the seal of purchase place
and purchase date.
5. If you met problems during use, please
contact the shop customer service which you
bought from.

www.das-4.com