DataCard ImageCard series User manual

™
DATACARD
®
CERTIFIED SUPPLIES
DATACARD
®
®®
®
DURAGARD
®
®®
®
CLEAR LAMINATES
FOR USE IN DATACARD
®
®®
®
DESKTOP CARD
PRINTERS
• Polyester laminates designed to extend the life of
national ID, driver’s license, and other ID cards
• Datacard
®
DuraGard
®
1.0 Mil laminates offer superior
tamper and moisture resistance
• Virtual edge-to-edge laminates available for the
Datacard
®
SP75 Card Printer are the largest CR80 sized
laminates in the card industry
SPECIFICATIONS:
Yield: See attached tables for card yields. Listed yields are approximate number of cards/images
that can be produced per supply unit. Actual yields may vary due to number of printer
initializations, user loading procedures, and other waste factors.
Industry S ecifications: All DuraGard 1.0 Mil Clear laminates offer superior tamper and
moisture resistance; as well as exceed the following industry standard specifications:
ISO/IEC 7810
ISO/IEC 10373-1
ANSI INCITS 322-2002
Storage and Shi ing:
Temperature: 32 – 90°F (0 - 38°C)
Humidity: 20 - 70% RH, non-condensing
Sunlight: No direct exposure to sunlight
Laminate Dimensions:
PRINTER WIDTH HEIGHT MARGIN **
Datacard
®
SP75 Card Printer 2.06 inches
52.32 mm
3.31 inches
84.07 mm
0.016 inch
0.40 mm
Datacard
®
ImageCard
®
IV Card Printer 2.00 inches
50.80 mm
3.25 inches
82.55 mm
0.031 inch
0.79 mm
Datacard
®
Magna™ Class Card
Printers
2.00 inches
50.80 mm
3.25 inches
82.55 mm
0.031 inch
0.79 mm
** Margin is the distance between the edge of the card and the edge of the laminate.
Configurations Available:
• Full card, full card with smart card cutout, full card with smart card window
• Magnetic stripe
• Other configurations available upon request
Usage Recommendations:
• Datacard Group recommends the use of composite cards with a minimum of 20% polyester
core between top and bottom layers of PVC
• When using DuraGard laminates with color ribbon, select a ribbon without a T-panel or deslect
the use of the T-panel within the printer driver.

DATACARD
®
®®
®
DURAGARD
®
®®
®
CLEAR LAMINATES
FOR USE IN DATACARD
®
®®
®
DESKTOP CARD
PRINTERS
DATACARD
®
SP SERIES LAMINATES FOR USE IN SP75 CARD PRINTER
DuraGard clear laminates for use in Datacard SP75 card printers are virtual edge-to-edge
laminates with less than 1/64” margin from laminate edge to card edge. Laminates are provided on
the Datacard distinctive blue cores with platinum flecks
®
.
ITEM
NUMBER SUPPLY TYPE FULL CARD
SMART
CARD*
MAGNETIC
STRIPE YIELD
562750-001 0.5 mil laminate ♦375 laminates
562751-001 0.5 mil laminate ♦375 laminates
562752-001 0.5 mil laminate ♦375 laminates
562753-001 1.0 mil laminate ♦300 laminates
562754-001 1.0 mil laminate ♦300 laminates
562755-001 1.0 mil laminate ♦300 laminates
* Smart card laminate is a full card laminate with a “window” cutout to expose the smart card chip.
DATACARD
®
IMAGECARD SERIES LAMINATES FOR USE IN:
• Datacard
®
ImageCard
®
IV Card Printer
• Datacard
®
Magna™ Platinum™ Series Card Printer
• Datacard
®
ImageCard
®
Magna™ Class Card Printer With Advanced Imaging Technology™
• Datacard
®
ImageCard
®
Magna™ Class Card Printer
ITEM
NUMBER SUPPLY TYPE FULL CARD
SMART
CARD**
MAGNETIC
STRIPE YIELD
557171-001 0.5 mil laminate ♦300 laminates
557171-002 0.5 mil laminate ♦300 laminates
553277-101 1.0 mil laminate ♦250 laminates
553277-102 1.0 mil laminate ♦250 laminates
** Smart card laminate is a full card laminate with a “notch” to expose the smart card chip.
YOUR BEST CHOICE FOR SUPPLIES
Protect your investment in Datacard
®
solutions by using Datacard Certified Supplies. You can count on
Datacard for all your supply needs. We engineer superior performance and reliability into every
system-matched supply item we offer. For you, that means smooth printing, brilliant image quality, high
security and exceptional performance. Worldwide representation creates a fast, direct connection with
the supplies and support you need, when and where you need them.
Datacard, Imag
eCard, Magna, Platinum, Advanced Imaging Technology, the Color Blue with Platinum Flecks,
and the
Datacard Certified Supplies icon are trademarks, registered trademarks or service marks of DataCard Corporation in the
United States and/or other countries. The color blue with platinum flecks is a registered trademark of DataCard
Corporation in the European Union and/or other countries.
© 2005 DataCard Corporation. All rights reserved.
Specifications subject to change without notice.
SG5-6001
11111 Bren Road West
Minnetonka, MN 55343-9015
+1 952.933.1223
+1 952.931.0418 FAX
www.datacard.com
™