DaVinci M10687 Maintenance manual

Care and Maintenance
RUBY RECLINER AND GLIDER
revised 01AUG2016 10687
Congratulations! This product will provide many
years of service if you adhere to the following
guidelines for care, maintenance, and operation.
This product is for residential use only. Any institu-
tional use is strictly prohibited.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE IT’S OWN
SPECIFIC QUANTITY OF PARTS AND HARDWARE. YOUR
MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED
DUE TO STYLISTIC VARIATIONS.

1
Maintenance and Cleaning:
To preserve the hand-crafted quality of your
furniture, we recommend using a cotton cloth
and a non-toxic cleaner. Periodic polishing or
oiling on wood stains will help to maintain the
rich wood tones. For our upholstered products,
we recommend using water to clean suede
products and light foam cleaners for all other
fabrics.
If your child is teething, some furniture’s finish
may be affected. Be assured that our
low-VOC lacquers, finishes and glues comply
with applicable regulations and standards.
Touch up kits and replacement parts are
available for purchase upon request by con-
tacting The MDB Family at: 323. 728. 8988
or [email protected].
Important Note:
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.

WARNING
!
2
• Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
• Read all instructions before assembling this product.
• Keep instructions for future use.
• Do not throw away packaging material until assembly
is complete.
• Properly discard all packaging materials after
assembly is complete.
• This product has many moving parts, serious injury can
occur if not used properly. Keep hands, fingers and
body parts away from the mechanism. To reduce the
risk of head entrapment and other injuries, keep
children and pets away from openings and moving
parts in and around furniture.
• Proper assembly of this item requires 2 people.
• Check this product for damaged hardware, loose
joints, missing parts or sharp edges before and after
assembly and frequently during use. DO NOT use this
product if any parts are missing, damaged or broken.
Contact The MDB Family for replacement parts and
instructional literature if needed. DO NOT substitute
parts.
• Maximum weight capacity: 300 pounds.

53
We will replace any missing parts at the time of
purchase or any defective item within a one year
period from the date of original purchase. Please
keep your receipt so that we may process your
warranty request. This warranty only covers new
units with original packaging and ownership, and
is not transferable. It does not cover any used,
secondhand or demo models.
This warranty does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse, negli-
gence, improper use or alteration to the finish,
design, and hardware of the product. The specific
legal rights of this warranty may vary from state
to state. Some states do not allow any exclusion
or limitation of incidental damages. Some states
do not allow limitation on how long an implied
warranty lasts.
ONE YEAR LIMITED WARRANTY:
If you would like to order replacement
or missing parts, please visit us at:
www.themdbfamily.com/support
OR you can contact us by mail at:
The MDB Family
855 Washington Blvd., Montebello, California 90640
Registering your product is even easier than
before. You can register your product on our
website at :
www.themdbfamily.com/registrations

4
B x 1 Base
C x 1 Cushion
Be sure you follow the instructions in the order that they appear.
RUBY RECLINER AND GLIDER
Parts List
Ref. No DescriptionParts
A x 1 Seat
Back

55
Ruby Recliner and Glider
Assembly Instructions
Step 1
(back)
B
A
(back)
(Base Cover)

B
B
(back)
(back)
x2
Step 1 (in details)
A
6
!

7
Step 2
Congrats!

8
Ruby Recliner and Glider
Tension Adjustment
From Chair to Recliner
The chair can be made to recline by simply pulling the
arm located at the inside right of the base (B) and press-
ing the back against the backrest.

9
Ruby Recliner and Glider
Tension Adjustment
From Recliner to Chair
The chair is returned to the upright position by exerting
pressure with the legs and accompanying the footrest to
the initial position.
CAUTION
Do not allow children to play on this mechanized furniture or operate the mecha-
nism. Leg rest folds down on closing so that a child could possibly be injured.
Always leave in an upright and closed position. Keep hands and feet clear of
mechanism. Only the occupant should operate it.