Decon wheel MED3152 User manual

2022-09-26 1(6)
Assembly instructions for Legend 2 with Onetool Block
MED3152
1. Remove wheels on both sides.
2. Check the correct placement for the stop pin, remove battery and anti tip devices from
the E-drive.
3. Anti tip devices from the chair are in use, see pictures below.
4. Placement for the adapter plate.
A
B
A
A
B
B

2022-09-26 2(6)
5. Assemble the plate (right side) according to picture.
Parts pair mounting set:
Item No. Part Number Qty Description
1 100 400 106 1 Spacer
2 XSM8LM 1 Lock Nut M8
3 XSM8X40 1 Screw M8 x 40
4 XSM8BR 1 Plain Washer 8,4
5 100 400 008 1 Spacer
6 100 400 013 1 Spacer
7 100 400 016 1 Spacer
8 MED2004 1 Bracket
9 XSM18M 1 Nut M18 x1
10 HW084 1 Sleeve M18X1
11 405241 1 Nordlock Washer M18
12 100 400 107 1 Spacer
6. Assemble the back placed battery bag.
A

2022-09-26 3(6)
MED1321
Legend2 with Joystick
Item No. Part Number Qty Description
1 XOC-46295-00 1 Bracket
2 XOC-48160-B0 1 Upper holder assembly2
3 XSM6X30 2 Screw M6 x 30
4 XSM6BR 4 Plain washer M6
5 XSM6ML 4 Locknut M6
6 XSM6X16 2 Screw M6 x 16
7 MED1502 1 Bracket
8 MED1501 Rev4 1 Bracket

2022-09-26 4(6)
Attendant control with joystick (left and right side)
MED1409
Item No. Part Number Qty Description
1 MED1317 1 Bracket
2 XSM6X35 1 Screw M6 x 35
3 XSM6X16 2 Screw M6 x 16
4 XSM6BR 3 Plain Washer M6
5 XSM6ML 3 Locknut M6
6 MED1316 1 Plate with pin
7 Xklamma2 1 XClamp2
8 100 400 044 1 Spacer
Move this
too the
other side,
if you
assemble
the joystick
on the left
side.

2022-09-26 5(6)
Alternative attendant control (only right side)
Item No. Part Number Qty Description
1 XSM6TG 1 Thorn Washer 6,4
2 Xklamma2 1 XClamp2
3 XSM6X20 1 Screw M6 x 20
4 XSM6BR 1 Plain Washer 6,4
5 MED1200 1 Attendant control

2022-09-26 6(6)
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsa
Sleeve
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm