Decon wheel Trigo T MED3327 User manual

11/8/2021
Assembly instructions for Trigo T
MED3327
1. Remove wheels and turn the bracket on both sides.
2. Check the correct placement for the stop pin and the battery connector. Check that
antitip devices and the battery box are removed from the E-Drive.

11/8/2021
3. Assemble the E-drive bracket (right side) according to picture.
4. Parts pair mountingset:
Item No. Part Number Qty Description
1 HW069 1 Sleeve M16X1
2 100 400 017 1 Spacer
3 XSM8X12 1 Screw M8 x 12
4 MED2000 1 Bracket
5 405239 1 Nordlock Washer M16
6 310061 1 Bracket Trigo T
5. Assemble the back rested battery bag.
2
1
3
4
6
5

11/8/2021
MED1638
Joystick Assembly Parallel
ITEM PART NUMBER QTY DESCRIPTION
1 XSFM5X35 2 Countersunk Screw M5 x 35
2 MED1328 1 Joystick Bracket
3 X0F-48160-D00 1 Parallel Bracket
4 XSM6X16 2 Screw Round M6 x 16
5 XSM6BR 2 Washer Plain M6
6 XSM6ML 2 Lock Nut M6
7 MED1496 1 Bracket Complete
4
1
6
5
2
7
3

11/8/2021
MED1639
Joystick Assembly SwingAway
ITEM PART NUMBER QTY DESCRIPTION
1 XSFM5X35 2 Countersunk Screw M5 x 35
2 MED1328 1 Joystick Bracket
3 XOC-48160-D0 1 SwingAway Bracket
4 XSM6X16 2 Screw Round M6 x 16
5 XSM6BR 2 Washer Plain M6
6 XSM6ML 2 Lock Nut M6
7 MED1496 1 Bracket Complete
4
1
6
5
2
7
3

11/8/2021
MED1599
Alternate attendant control (Only on Right side)
Item number. Part Number Qty Description
1 MED1200 1 Attendant control
2 XSM6TG 1 Serrated washer
3 XOD2612K-00 1 Clamp with hole
4 XOD2612E-00 1 Clamp with hole
5 XSM6BR 1 Plain washer 6,4
6 XSM6X50 1 Screw M6x50
6. For the attendant control unit, you need these parts.
1 2 3 4 5 6

11/8/2021
Brake adjustment
Item No. Part Number Qty Description
1 100 400 018 1 Spacer
2 XSM6FJ 1 Single coil Washer M6
3 XSM6X40 1 Screw Rounded M6 x 40

11/8/2021
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread Åtdragningsmoment / Tightening torque
M3 1,2 Nm
M4 3 Nm
M5 6 Nm
M6 10 Nm
M8 25 Nm
M10 50 Nm
M12 85 Nm
Navhylsor.
Sleeves.
Gänga / Thread Åtdragningsmoment / Tightening torque
M16x1 30 Nm
M18x1 40 Nm