Decon wheel Rehatec Galileo User manual

2022-02-10
Assembly instructions for Rehatec Galileo
MED3300
1. Remove wheels and sleeves on both sides.
2. Check the correct placement for the stop pin.

2022-02-10
3. Assembly the plate (right side) according to picture.
Parts for right side:
Item No. Part Number Qty Description
1 MED2000 1 Bracket
2 HW069 1 Sleeve
3 405242 1 Lock Washer M16
4 XSM16M 1 Nut M16 low
5 XSM6X50 1 Screw Rounded M6x50
6 XSM6ML 1 Lock Nut M6
7 100 400 002 2 Spacer
8 100 400 007 1 Spacer
9 100 400 020 1 Spacer
10 100 400 005 2 Spacer
11 100 400 017 1 Spacer
Back rested battery bag 1 Battery Bag

2022-02-10
Anti-tip devices
4. You must place the left anti-tip device on the right side and vice and versa.
Parts for one side.
Item No. Part Number Qty Description
1 340009 1 Spacer
2 XFM8x40 2 Screw Countersunk M8x40
3 XSM8ML 2 Lock Nut M8
5. Assemble the back rested battery bag on the wheelchair.

2022-02-10
Attendant control for joystick (left and right side)
MED1409
Item No. Part Number Qty Description
1 MED1316 1 Plate with pin
2 XSM6X16 2 Screw M6 x 16
3 MC6SM6X35 1 Screw M6 x 35
4 XSM6BR 3 Plain Washer 6,4
5 XSM6ML 3 Locknut M6
6 MED1317 1 Bracket
7 Xklamma2 1 XClamp2
8 100 400 044 1 Spacer
Move this
too the
other side,
if you
assemble
the joystick
on the left
side.

2022-02-10
Alternative attendant control (only right side)
MED1226
Item No. Part Number Qty Description
1 XSM6TG 1 Thorn Washer 6,4
2 Xklamma2 1 XClamp2
3 MC6SM6X20 1 Screw M6 x 20
4 XSM6BR 1 Plain Washer 6,4
5 MED1200 1 Attendant control

2022-02-10
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread Åtdragningsmoment / Tightening
torque
M3 1,2 Nm
M4 3 Nm
M5 6 Nm
M6 10 Nm
M8 25 Nm
M10 50 Nm
M12 85 Nm
Navhylsor.
Sleeves.
Gänga / Thread Åtdragningsmoment / Tightening
torque
M16x1 30 Nm
M18x1 40 Nm