Delfield CMB-2 User manual

Short Form Specifications
Cabinet top surface shall be 22-gauge stainless steel. Insulated fold-
ing lid shall be stainless steel with high impact plastic liner and have
chrome plated, die cast handles. Opening shall have a throat liner
constructed of high impact plastic.
The exterior sides shall be 20-gauge stainless steel. The watertight
inner liner shall be 22-gauge stainless steel. The unit shall be insu-
lated with foamed-in-place high density polyurethane.
Refrigeration system will be controlled by an electronic control with
built in defrost timer. System will also include a blower coil and a
1.00" (2.5cm) I.P.S drain. Unit designed to maintain a temperature
setting from -5ºF to 40ºF (-21ºC to 4ºC).
THE FOLLOWING APPLIES TO MODELS CPB-2 AND CPB-4 ONLY:
Stainless steel perforated dispenser tubes (2 on CPB-2 and 4 on CPB-
4) for plates shall be furnished with properly calibrated, non-fatiguing
stainless steel springs. Each dispenser tube shall have a maximum
capacity of approximately 50 plates.
NOTE: The maximum dish diameter that can be dispensed by these
models is 9.62" (24.4cm).
THE FOLLOWING APPLIES TO MODEL CMB-2 ONLY:
Self-leveling mechanism to be field adjustable by adding or removing
stainless steel extension springs on perimeter of vertical side chan-
nels. A 20.00" x 20.00" (50.8cm x 50.8cm) carrier tray shall be pro-
vided. The dispenser shall have a capacity of three to four 20" x 20"
racks (50.8cm x 50.8cm). Racks are not supplied by Delfield; must
hold 20-25 mugs.
Optional Accessories and Modifications
• Lid-locking device (specify model number)
• Special voltages (consult factory)
Built in chilled mug and plate dispensers
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
CMB/CPB
MODEL CMB-2
MODEL CPB-2
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.

Techanical Data–Standard Unit
CMB/CPB
Built in chilled mug and plate dispensers
MODEL APPROX. COUNTER TOP CUTOUT ELECTRICAL NEMA SHIP
NUMBER CAPACITY DIMENSINS CONNECTION HP AMPS PLUG WEIGHT
CMB-2 60 mugs 22.25" x 25.25" 120V/60 Hz/ single phase 1/3 10.0 5-15P 385lbs - 175kg
56.5cm x 64.1cm
CPB-2 100 plates or bases (1) 13.25" x 23.25" 120V/60 Hz/ single phase 1/3 10.0 5-15P 360lbs - 163kg
1-33.7cm x 59.1cm
CPB-4 200 plates or bases (2)13.25" x 23.25" 120V/60 Hz/ single phase 1/3 10.0 5-15P 385lbs - 175kg
2-33.7cm x 59.1cm
with 2.12"/5.4cm space
between cutouts
NOTES:
• These models include a 9' (2.7cm) cord with NEMA 5-15 plug.
• The following information is required wih an order to ensure proper operation of CP-2 and CP-4 models:
1) Height of one plate,
2) Overall diameter of the plate,
3) Height of a stack of eleven plates, and
4) Weight of a stack of 10 plates.
PLAN VIEW
CMB-2 MODELS
ELEVATION VIEW
CMB-2 MODELS
PLAN VIEW
CPB-2 MODELS
PLAN VIEW
CPB-4 MODELS
ELEVATION VIEW
CPB-2 MODELS
ELEVATION VIEW
CPB-4 MODELS
COUNTER INSTALLATION DETAIL
RIGHT END VIEW CMB-2 MODELS RIGHT END VIEW
CPB-2 & CPB-4 MODELS
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MSCMB 05/02
47.50"
120.7cm
27.50"
69.9cm
20.62"
52.4cm
1.62"
4.1cm
32.00"
81.3cm
27.43"
69.7cm
17.25"
43.8cm
1.87"
4.8cm
13.12"
33.3cm
2.40"
6.1cm
MAX
9.62"
24.4cm
23.12"
58.7cm
27.43"
69.7cm
17.37"
44.1cm
1.62"
4.1cm
13.12"
33.3cm
2.15"
5.5cm
MAX
9.62"
24.4cm
23.12"
58.7cm
Throat
Liner Cutout
dimensions in
counter top are
shown in the
specications
table
27.75"
70.48cm
29.69"
75.41cm 29.68"
75.39cm
47.50"
120.7cm
Lids ad
1.75"/4.4cm
to height. Lids ad
1.75"/4.4cm
to height.
Lids ad
1.75"/4.4cm
to height.
47.68"
121.1cm
32.18"
81.8cm 47.68"
121.1cm
NOTE: On
CPB models,
leave a 2.12"
(5.4cm) space
between the
two cutouts.
Counter top
27.68"
70.30cm