Delfield Shelleymatic T-1221H User manual

Short form specifications
Cabinet top shall be 16-gauge stainless steel with all corners
welded, polished and reinforced with heavy-gauge channels.
Cabinet exterior panels shall be 20-gauge stainless steel.
Bottom shall be 14-gauge galvanized steel. Unit shall have (4)
4.00” (10.2cm) diameter polyolefin swivel casters (all locking),
and non-marking gray bumpers at each corner.
Dispenser platform carrier shall be 18-gauge stainless steel
and shall be removable for cleaning. Each dispenser shall be
field adjustable by adding or removing stainless steel extension
springs located inside the elevator housing.
THE FOLLOWING APPLIES TO T/T2-H HEATED DISPENSERS
ONLY:
Heated dispensers shall have a stainless steel liner separated
from the outer panels by 2.00” (5.1cm) of fiberglass insulation.
Unit shall be supplied with 9’ (2.7m) cord and plug as shown in
the specifications table on reverse. Electrical connections shall
be 120 volt, 60 hertz, and single phase.
Dispenser shall have one or two convection heating modules
consisting of a single 700-watt heating element and fan motor,
located in the center of the interior bottom cavity. Models
1014-1422 shall have one module; larger models have two
modules. Air intake shall have a filter. Dispenser shall have an
adjustable thermostat and an ON/OFF switch on the side of the
unit. Unit shall maintain a temperature between 150°F-170°F
(66°C-77°C).
Mobile enclosed tray and rack dispensers
PROJECT
ITEM #
QUANTITY DATE
APPROVAL
T
MODEL TG-1216
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Optional Accessories & Modifications
• Heavy-duty caster (consult factory)
• Flange-mount feet in lieu of casters
• Special tray dispenser sizes
• Six- or eight-hole silverware bins with
plastic or stainless steel cylinders
• Additional plastic or stainless steel
silverware cylinders
• Wrap-around bumpers (adds 1.75”
[4.4cm] to overall length and depth)
• Fiberglass panels
• Laminate panels
• Special tray & rack sizes
• Special height

Techanical Data–Standard Unit
T
Mobile enclosed tray and rack dispensers
MODEL MAXIMUM SHIP
NUMBER LENGTH DEPTH TRAY SIZE WEIGHT AMPS
T-1014 23.12" (58.7cm) 16.75" (42.5cm) 10" x 15" (25.4cm x 38.1cm) 150lbs/68kg
T-1216 22.75" (57.8cm) 20.12" (51.1cm) 12" x 16" (30.5cm x 40.6cm) 153lbs/69kg
T-1221 27.75" (70.5cm) 20.12" (51.1cm) 12" x 21" (30.5cm x 53.3cm) 162lbs/74kg
T-1418 24.75" (62.9cm) 22.12" (56.2cm) 14" x 18" (35.6cm x 45.7cm) 153lbs/69kg
T-1422 28.75" (73.0cm) 22.12" (56.2cm) 14" x 22" (35.6cm x 55.9cm) 162lbs/74kg
T-1622 28.75" (73.0cm) 24.12" (61.3cm) 16" x 22" (40.6cm x 55.9cm) 177lbs/80kg
T-1826 32.75" (83.2cm) 26.12" (66.3cm) 18" x 26" (45.7cm x 66.0cm) 210lbs/95kg
T-2020 27.75" (70.5cm) 28.12" (71.4cm) 20" x 21" (50.8cm x 53.3cm) 175lbs/79kg
T2-1014 27.75" (70.5cm) 22.12" (56.2cm) 10" x 15" (25.4cm x 38.1cm) 177lbs/80kg
T2-1216 32.75" (83.2cm) 24.12" (61.3cm) 12" x 16" (30.5cm x 40.6cm) 177lbs/80kg
T2-1221 32.75" (83.2cm) 29.12" (74.0cm) 12" x 21" (30.5cm x 53.3cm) 185lbs/84kg
T-1221H 27.75" (70.5cm) 20.12" (51.1cm) 12" x 21" (30.5cm x 53.3cm) 127lbs/58kg 7.0
T-1418H 24.75" (62.9cm) 22.12" (56.2cm) 14" x 18" (35.6cm x 45.7cm) 155lbs/70kg 7.0
T-1422H 28.75" (73.0cm) 22.12" (56.2cm) 14" x 22" (35.6cm x 55.9cm) 155lbs/70kg 7.0
T-1826H 32.75" (83.2cm) 26.12" (66.3cm) 18" x 26" (45.7cm x 66.0cm) 195lbs/89kg 14.0
T-2020H 27.75" (70.5cm) 28.12" (71.4cm) 20" x 21" (50.8cm x 53.3cm) 185lbs/84kg 14.0
T2-1221H 32.75" (83.2cm) 29.12" (74.0cm) 12" x 21" (30.5cm x 53.3cm) 185lbs/84kg 7.0
NOTES:
• Standard corner bumpers add 1.75" (4.4cm) to overall length and width.
• T-2 models dispense two separate stacks of trays.
• T-H & T2H models are 120 volt, 60 hertz, single phase, and include a 9' (2.7m) cord with plug.
PLAN VIEW
T MODELS
ELEVATION VIEW
T MODELS
ELEVATION VIEW
T MODELS
RIGHT END VIEW
ALL TG MODELS
PLAN VIEW
T2 MODELS
D
L
D
L
36"
71.1cm
28"
71.1cm
5.00"
12.7cm
RIGHT VIEW
T MODELS
5.00"
12.7cm
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • [phone] • Fax [phone] • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
MST 05/02