Dell UltraSharp 2208WFP User manual

Dell™2208WFP AIO Flat Panel Monitor ForDellOptiPlex™SFFComputer
Notes, Notices, and Cautions




Information in this document is subject to change without notice.
©2008DellInc.Allrightsreserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo aretrademarksofDellInc;Microsoft and Windows are registered trademarks of Microsoft Corporation in the United
Statesand/or other countries,which may be registered in certain jurisdictions.ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY
STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2208WFPf
August2008Rev.A00

About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix

NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Back to Contents Page

About Your Monitor
Dell™2208WFP AIOFlatPanelMonitorForDellOptiPlex™SFFComputer
Package Contents
Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing.
Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
Universal Serial Bus (USB) Interface
Maintenance Guidelines
NOTE: Some items may be optional and may not ship with your Monitor. Some features or media may not
be available in certain countries.
lMonitor
lStand


Product Features
lCable Cover
lPower Cable
lDVI Cable

lVGA cable (attached to the monitor)
lUSB up stream cable (enables the USB ports on the monitor)
lDrivers and Documentation media
lQuick Setup Guide
lSafety Information
lStand Template sheet

The 2208WFP SFF AIO flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include:
■22-inch (573.6 mm) viewable area display (Measured diagonally) .
■1680x1050 resolution, plus full-screen support for lower resolutions.
■Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.
■Plug and play capability if supported by your system.
■On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■Software and documentation media which includes an information file (INF), Image color Matching File (ICM), and product documentation.
■Energy Saver feature for Energy Star compliance.
■Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.
■Monitor stand integrating a Dell OptiPlex™Small Form Factor computer, cable cover and monitor in an All-In-One configuration.
■Tilt, swivel and vertical extension adjustment capabilities.
■Single step auto engagement and removal of computer and cable cover from the monitor stand.
■Lockable cable cover helps cable arrangement and prevents cable theft.
■Large and comfortable retractable handle provides system portability.
■Cable management clip on the back of stand to route cables.
■Security lock slots on monitor and stand.
■Provision of screw holes below stand base allow desktop mounting for added security.
Identifying Parts and Controls
Front View

Back View
Front View
Front panel controls
Label
Description
1
Input Source select
2
OSDMenu/Selectbutton
3
Brightness & Contrast/Down (-) button
4
Auto-adjust/Up (+) button
5
Power button (with power light indicator)




Side View


Back View
Back View with monitor stand
Label
Description
Use
1
VESA mounting holes (100mm)
(Behind attached base plate)
Wall mount monitor using VESA compatible wall mount kit (100mm x 100mm)
2
Stand removeal button
Releases stand from monitor.
3
Monitor security lock slot
Secures monitor with security lock
4
Dell Soundbar mounting brackets
Attaches the optional Dell Soundbar.
5
Barcode serial number label
Contact Dell for technical support.
6
Regulatory rating label
Lists the regulatory approvals.
7
Auto retractable handle
Enable full monitor and computer system transportability.
8
Unlock switch
Releases computer and cable cover from stand.
9
Cable management clip
Organizes cables
10
Stand security lock slot
Secures computer and cable cover with security lock


Top View


Leftview
Right view
Label
Description
Use
1
USB downstream ports
Connect your USB devices
Top view
Label
Description
Use
1
Computer alignment feature
Matches the front contour of computer.
2
Chassis hooks
Locks computer onto stand.
3
Hook trigger
Detects when computer is on stand and engages
chassis hooks.
4
Computer platform
Supports computer and cable cover on stand.
5
Cable cover latch
Releasecable cover from stand.


Bottom View
6
Computer alignment ramp
Matches the front contours of computer.
Bottom view
Label
Description
Use
1
Desktop mount screw holes (4x)
To mount stand on desktop foradded security
2
Swivel rollers
To swivel monitor
3
Power connector
Connect the power cable
4
Dell Soundbar power connector
Connect the power cord for the Soundbar
(optional)
5
DVI connector
Connect your computer DVI cable
6
VGA connector
Connect your computer VGA cable
7
USB upstream connector
Connect the USB cable that came with your
monitor to the monitor and the computer.
Once this cable is connected you can use the
USB connectors on the side and bottom of
the monitor.
8
USB downstream connectors
Connect your USB devices. You can only use
this connector after you have connected the
USB cable to the computer and USB upstream
connector on the monitor.
Monitor Specifications
Flat Panel Specifications
Screen type
Active matrix - TFT LCD
Panel type
TN
Screen dimensions
22 inches (22-inch viewable image size)
Preset display area:
473.76(H)X296.1(V)
Horizontal
473.76 mm (18.7 inches)
Vertical
296.1 mm (11.7 inches)
Pixel pitch
0.282 mm

*[2208W SFF AIO] color gamut (typical) is based on CIE1976 (102%) and CIE1931 (92%) test standards.
Viewing angle
160°(vertical)typical,160°(horizontal)typical
Luminance output
300 CD/m²(typical)
Contrast ratio
1000 to 1 (typical)
Faceplate coating
Antiglare with hard-coating 3H
Backlight
CCFL (4) edgelight system
Response Time
5 ms typical
Color Gamut
102%*
Resolution Specifications
Horizontal scan range
30 kHz to 83 kHz (automatic)
Vertical scan range
56Hzto75Hz(automatic)
Optimal preset resolution
1680 X 1050 at 60 Hz

Supported Video Modes
Highest preset resolution
1680 x 1050 at 75 Hz
Video display capabilities (DVI playback)
480i/480p/576i/576p/720p/1080i/1080P
(Supports HDCP)
Preset Display Modes
Display Mode
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
VESA, 720 x 400
31.5
70.0
28.3
-/+
VESA, 640 x 480
31.5
60.0
25.2
-/-
VESA, 640 x 480
37.5
75.0
31.5
-/-
VESA, 800 x 600
37.9
60.0
40.0
+/+
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 1024 x 768
48.4
60.0
65.0
-/-

VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1152 x 864
67.5
75.0
108.0
+/+
VESA, 1280 x 1024
64.0
60.0
135.0
+/+
VESA, 1280 x 1024
80.0
75.0
135.0
+/+
VESA, 1680 x 1050
65.2
60.0
146.3
-/+
VESA, 1680 x 1050
64.6
60.0
119.0
+/-
Electrical Specifications
Video input signals
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm
input impedance
Digital DVI-D TMDS, 600mV for each differential line,
positive polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current
100 to 240 VAC/50 or 60 Hz +3 Hz/2.0A (Max.)
Inrush current
120 V: 42 A (Max.)
240 V: 80 A (Max.)
Physical Characteristics
Connector type
15-pin D-subminiature, blue connector; DVI-D, white
connector
Digital: Detachable, DVI-D, Solid pins, shipped detached
from the monitor

Signal cable type
Analog:Detachable, D-Sub, 15pins, shipped attached to
the monitor
Dimensions (with stand)
Height (Extended)
20.75 inches (527.04mm)
Height (Compressed)
17.21 inches (437.04 mm)
Width
20.13 inches ( 511.41mm)
Depth
10.07 inches (255.75 mm)
Dimensions (without stand)
Height
13.19 inches (334.94 mm)
Width
20.13 inches (511.41 mm)
Depth
2.56 inches (65.00 mm)
Stand dimensions
Height (handle extended)
18.09 inches (459.38 mm)
Height (handle retracted)
16.92 inches (429.66 mm)
Width
16.85 inches (428.06 mm)
Depth
10.07 inches (255.75 mm)
Weight
Weight with packaging
27.86 lbs (12.65 kg)
Weight with stand assembly and cables
21.63 lbs (9.82kg)
Weight without stand assembly
(For wall mount or VESA mount considerations -
no cables)
10.15 lbs (4.61 kg)
Weight of stand assembly
11.26 lbs (5.11 kg)

Environmental Characteristics
Temperature

Operating
5°to35°C(41°to95°F)
Non-operating
Storage: -20°to60°C(-4°to140°F)
Shipping: -20°to60°C(-4°to140°F)

Back to Contents Page

Appendix
Dell™2208WFP AIOFlatPanelMonitorForDellOptiPlex™SFFComputer
Safety Instructions
FCC Notice (U.S. Only) and Other Regulatory Information
Contacting Dell


CAUTION: Safety Instructions
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:

Back to Contents Page
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill,
or Dell product catalog.
1.
Visit support.dell.com.
2.
Verify your country or region in the Choose A Country/Region drop-downmenuatthebottomofthepage.
3.
Click Contact Us on the left side of the page.
4.
Select the appropriate service or support link based on your need.
5.
Choose the method of contacting Dell that is convenient for you.

Back to Contents Page
Setting Up Your Monitor
Dell™2208WFPAIOFlatPanelMonitorForDellOptiPlex™SFFComputer
IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess
1. Go to http://support.dell.com,enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1680x1050 again.
Back to Contents Page
NOTE:
Ifyouareunabletosettheresolutionto1680x1050,pleasecontactDell™toinquireaboutaGraphicsAdapterthatsupportstheseresolutions.

Back to Contents Page
Setting Up Your Monitor
Dell™2208WFP AIOFlatPanelMonitorForDellOptiPlex™SFFComputer
IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1680X1050 again.

Back to Contents Page
NOTE: If you are unable to set the resolution to 1680x1050, please contact the manufacturer of your computer or consider purchasing a graphics adapter
thatwillsupportthevideoresolutionof1680x1050.

Back to Contents Page
Operating the Monitor
Dell™2208WFP AIOFlatPanelMonitorForDellOptiPlex™SFFComputer
Using the Front Panel Controls
Using the On-Screen Display (OSD) Menu
Using the Dell Soundbar (Optional)
Operating the Adjustable Stand

Using the Front Panel
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,
an OSD shows the numeric values of the characteristics as they change.
Front panel Button
Description
A
Input Source Select/Select

Use this button to select the input source or select an OSD menu option. Use the Input source button to select one of the two
different video signals that may be connected to your monitor:
lVGA input
lDVI-D input
If either VGA or DVI-D input is selected and both VGA and DVI-
D cables are not connected, a floating dialog box as shown below
appears.
If either S-Video or Composite input is selected and both cables are not connected or the video source is turned off, the screen
does not display an image. If any button is pressed (except power button), the monitor displays the following message:

or
or
or
B
Menu
Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See Accessing the Menu System.
C
Brightness&Contrast /Adjust
UP
Use this button to directly access the "Brightness/Contrast" menu or to increase the values of the selected menu option.
D
Automatic Adjust /Adjust
Down
Use Auto Adjust to activate automatic setup/adjustment or to decrease the values of the selected menu option. The following
dialog appears on a black screen as the monitor self-adjusts to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further

Using the On-Screen Display (OSD) Menu

Accessing the Menu System
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for non Analog (non VGA) Input
2.Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
followingtableforacomplete list of all the options available for the monitor.
3.PushtheMENUbuttononcetoactivatethehighlightedoption.
4.Push and button to select the desired parameter.
5. PushMENUtoentertheslidebarandthenusethe and buttons, according to the indicators on the menu, to make your changes.
6.Select the "Menu/Exit" option to return to the main menu or exit the OSD menu.

tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
E
Power
(withpowerlightindicator)
Use the Power button to turn the monitor on and off.

The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
NOTE: IfyouchangethesettingsandtheneitherproceedtoanothermenuorexittheOSDmenu,themonitorautomaticallysavesthosechanges.The
changes are also saved if you change the settings and then wait for the OSD menu to disappear.

NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.
Icon
Menu and
Submenus
Description


BRIGHTNESS
& CONTRAST
Use this menu to activate Brightness/Contrast adjustment.


Brightness
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100).
Contrast
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Exit Menu
Push toexittheOSDmainmenu.


AUTO
ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
with your particular setup.
NOTE: Inmostcases,AutoAdjustproducesthebestimageforyourconfiguration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT SOURCE
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.

VGA
Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.
DVI-D
Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.
Exit Menu
Push toexittheOSDmainmenu.
PRESET
SETTING
Use the Color Settings to adjust the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.
PresetsettingsubmenuforVGA/DVI-D input
(Graphics Mode)
PresetsettingsubmenuforVGA/DVI-D input
(Video Mode)

Input Color
Format
Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is
connected to a DVD by a YPbPr to VGA or YPbPr to DVI cable or if the DVD color output setting is not RGB.
Gamma
To achieve the different color mode for PC and Mac.
Color Setting
mode
You can choose between a Graphics and a Video mode. If your computer is connected to your monitor, choose Graphics. If a DVD,
STB, or VCR is connected to your monitor, choose Video.
Preset Mode
s
When you select Graphics, you can choose Desktop, Multimedia, Game, sRGB,Warm, Cool, or Custom (R,G,B);
lIf you view media application like photo, clip etc via PC, choose "Multimedia" preset;
lIf you play a game in PC, choose "Gaming" preset;
lIf you prefer a lower color temperature (5700K), choose "Warm" preset;
lIf you prefer a higher color temperature, choose "Cool" preset;

lCustom (R, G, B) Preset offers a range of 6500K colors;
lChoose "Desktop" to utilize the panel native color format;
lSelect Warm preset for a reddish tint. This color setting is used for color-intensive applications (photograph image editing,
multimedia, movies, etc.)
lSelect Cool preset for a bluish tint. This color setting is used for text based applications (spreadsheets, programming, text
editors, etc.)
l
Select Custom preset to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from 0
to 100.
When you select Video, you can choose Movie, Game, Sports, or Nature preset:
lFor playing a movie, choose "Movie" preset;
lFor playing a sport program, choose "Sports" preset;
lFor playing a game, choose "Game" preset;
lFor general picture or web or watch TV, choose Nature preset. You can adjust the Hue(Tint)/Saturation based on your
preference. If you want to restore default color settings, choose Color Reset;
lSelect Color Reset preset to restore default (factory) Color settings. This setting is also the “sRGB”standard default color
space.
Hue
This feature can shift color of video image to green or purple. This is used to adjust the desired flesh tone color. Use or to
adjust the hue from '0' to '100' .
Push to increase the green shade of the video image
Push to decrease the purple shade of the video image
NOTE: Hue adjustment is available only for video input.
Saturation
This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'.
Push to increase the monochrome appearance of the video image
Push to decrease the colorful appearance of the video image
NOTE: Saturation adjustment is available only for video input.
Color Reset
Reset your monitor color settings to the factory settings.
Exit Menu
Push toexittheOSDmainmenu.
DISPLAY
SETTINGS
Use the Display Settings to adjust image.
