Delta AirEye 007180 User manual

Quick Installation Guide
AirEye®
READ AND SAVE
THESE INSTRUCTIONS
Operating Instructions and Maintenance:
bigfans.com/support
TECHNICAL SPECIFICATIONS
Fan Size Fan Weight* Input Power Max Amps Max Power
20 in. (508 mm) 32 lb (14.5 kg)
100–120 VAC, 1Ф, 50/60 Hz
200–240 VAC, 1Ф, 50/60 Hz
277 VAC, 1Ф, 50/60 Hz
5.1 A
3.1 A
3.1 A
386 W
392 W
508 W
24 in. (610 mm) 38 lb (17.2 kg)
100–120 VAC, 1Ф, 50/60 Hz
200–240 VAC, 1Ф, 50/60 Hz
277 VAC, 1Ф, 50/60 Hz
5.2 A
3.1 A
3.0 A
396 W
400 W
501 W
30 in. (762 mm) 45 lb (20.4 kg)
100–120 VAC, 1Ф, 50/60 Hz
200–240 VAC, 1Ф, 50/60 Hz
277 VAC, 1Ф, 50/60 Hz
5.0 A
3.0 A
3.1 A
384 W
390 W
508 W
36 in. (914 mm) 67.1 lb (30.4 kg)
110–120 VAC, 1Ф, 50/60 Hz
200–240 VAC, 1Ф, 50/60 Hz
277 VAC, 1Ф, 50/60 Hz
9.7 A
5.5 A
4.5 A
711 W
669 W
716 W
*Includes fan motor, blades, and cage assembly.
CAUTION: To reduce risk of personal injury, use only with mounting assembly models 007180, 007262,
009182, 007265, and 008001 manufactured by Big Fans.

1. MOTOR
Make sure fan mount has been installed as specified in the mounting instructions.
To adjust motor angle, loosen main mounting bolt and angle adjustment bolt.
PARTS AND HARDWARE
1/2-13 x 1-1/4" Main Mounting Bolt
1/4-20 x 7/8" Angle Adjustment Bolt
1/2-13 Flange Nylock Nut
1/4-20 Flange Nylock Nut
30 ft·lb (40.7 N·m)
7 ft·lb (9.5 N·m)
Angle Adjustment
Hardware***
(4) Flange
Nuts**
(4) Keyhole
Mounting Slots
Blade Assembly
(2) Set
Screws*
(4) Safety Hinge Pins
Front Guard
Main Mounting
Hardware
Hinge Pin Eyelets
(4) Motor Thru-
Bolts
Rear Guard
Blade Assembly
Retainer
*Pre-mounted to blade assembly.
**Pre-mounted to motor thru-bolts.
***Spare hardware included.
Harmonics filter not shown. Not included
for all regions. Install if included.
Safety cable not shown.

3. REAR GUARD
Align Mounting Slots Secure Guard
2.5 ft·lb (3.4 N·m)
2. HARMONICS FILTER (36 IN. [914 MM] FANS)
Select regions only. Install if included with your fan.
Flange Nut

4. BLADE ASSEMBLY
Ensure blade assembly is fully seated onto shoulder of shaft and set screws are aligned to flats of shaft.
5/32"
(4 mm)
20 ft·lb (27.1 N·m)
IMPORTANT: Always
install retaining ring.

5. FRONT GUARD
Align Eyelets
Fasten Hinge Pins
Start with topmost hinge.

7. HARMONICS FILTER (20, 24, AND 30 IN. [508, 610, AND 762 MM] FANS)
Select regions only. Install if included with your fan.
6. SAFETY CABLE
Do not attach safety cable to fan mount under any circumstances.

ELECTRICAL CONNECTIONS
Power Cord Controller or Automation
and Multi-Fan Kit
Power Cord Controller or Automation
and Multi-Fan Kit
Occupancy
Sensor
Fan Only Fan with Occupancy Sensor*
ELECTRICAL CONNECTIONS: FAN WITH HARMONICS FILTER
Power
Cord
Controller or Automation
and Multi-Fan Kit
Harmonics Filter
20, 24, and 30 in. (508, 610, and 762 mm)
Fans
36 in. (914 mm) Fans
Power
Cord
Controller or Automation
and Multi-Fan Kit
Harmonics Filter
*Occupancy sensor not applicable to 277 V fans.

© 2020 DELTA T LLC ALL RIGHTS RESERVED.
AIE-INST-321-ENG-01 REV H 03/31/2022
Conforms to UL 507: Electric Fans
Certified to CSA C22.2 No. 113: Fans & Ventilators
ELECTRICAL CONNECTIONS: FAN WITH OCCUPANCY SENSOR* AND HARMONICS FILTER
Occupancy
Sensor
20, 24, and 30 in. (508, 610, and 762 mm)
Fans
36 in. (914 mm) Fans
Power
Cord
Controller or Automation
and Multi-Fan Kit
Harmonics Filter
Occupancy
Sensor
Power
Cord
Controller or Automation
and Multi-Fan Kit
Harmonics Filter
POWER WIRING: 277 V FANS
L1/AC Line
L2/AC Line
Earth/PE
Black
White
Green
Supply Power Fan Power Cable
Single Phase (L1 + L2 + PE)
Single Phase (L1 + N + PE)
L1/AC Line
AC Neutral
Earth/PE
Black
White
Green
Supply Power Fan Power Cable
*Occupancy sensor not applicable to 277 V fans.