To open the disc tray, press OPEN/CLOSE.
To close the disc tray, press OPEN/CLOSE again.
During DVD playback,press MENU to display the disc menu of the current title.
Note: This function is subject to the disc.
During VCD/DVD playback, press OSD to display the current time counter position as follows.
MENU
During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC Off.
These keys are used to input the time, as well as title, chapter and track numbers.
When a CD,DVD,MP3 or VCD is playing (with PBC off), press the 0-10 keys to select a track Directly.
When a numeric item is displayed on the Screen(with PBC on), press the 0-10 keys to select the
desired entry.
During AVI,DVD, VCD or SVCD playback, press SLOW for slow motion playback.
Once you press SLOW, the disc will play at 1/2, 1/4,1/8 and 1/16 normal speed.
Press PLAY to resume normal playback.
During AVI,DVD, CD,MP3 or VCD playback, press PREV to play the previous track.
Each press of the REPEAT button will change the repeat mode.
During AVI,VCD,playback,there are three modes: repeat track, All &off.
During DVD,playback,there are three modes: Repeat Charpter,Repeat Title and All.
Note: During VCD playback,the PBC mode must be set to Off.
During playback, press A-B to select point A.
Press it again to select point B. The player will repeat the section from A to B automatically.
Press A-B a third time to cancel A-B repeat and clear points A and B.
Note: During CD/VCD/SVCD playback, points A and B must be within the same track.
During AVI,DVD playback, points A and B can be selected in chapter.same
During AVI,DVD,CD,MP3 or VCD playback, press REV to scan in reverse.
The player will review the disc at 2, 4, 8 ,16 and 32 times speed.
Press PLAY to resume normal playback.
During AVI,DVD,CD,Mp3 or VCD playback, press FWD to scan forward.
The player will cue the disc at 2, 4,8 ,16 and 32 times speed.
Press PLAY to resume normal playback.
PBC
0-10 Keys
SLOW
PREV
NEXT
REPEAT
A-B
REV
FWD
OPEEN CLOSE
OSD
REMOTE CONTROL OPERATION
POWER
During playback, Press N/P to select the mode from AUTO/NTSC / PAL.
N/P
DVD:Tt 01/05 ch 01/29
0:02:21
VCD: Track 01/19
0:03:49
During CD,MP3 playback,there are three modes: single,folder&off.
4
During AVI,DVD, CD,MP3 or VCD playback, press NEXT to play the next track.
Press POWER to be in Standby mode.
Press once more to resume to play from the beginning.
When PBC on, you could enter to the root menu and select any of the track you would like to play.
Then, press PBC again to be off, unit will back to play automatically.
