Denver VPR-250 User manual

10/2022
À DÉPOSER
EN MAGASIN À DÉPOSER EN DÉCHÈTERIE
OU
FRFR
Cet appareil et
ses cordons sont
recyclables
VPR-250

Safety information
Please read the safety instructions carefully
before using the product for the first time and
keep the instructions for future reference.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
ENG1
The lightning flash with
arrowhead symbol within an
equilateral triangle is intended
to alert the user to the
presence of uninsulated
dangerous voltage within the
product's enclosure that may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK. DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
1.This product is not a toy. Keep it out of reach of children.
2.Keep product out of the reach of children and pets to avoid chewing and swallowing.
3.Product operating and storage temperature is from 0 degree Celsius to 40 degree Celsius.
Under and over this temperature might affect the function.
4.Never open the product: the device may contain parts with deadly voltage.
5.Repairs or service should only be performed by qualified personnel.
6.The direct plug-in adapter is used as disconnect device,
the disconnect device shall remain readily operable.
So make sure there is space around the power outlet for easy access.
7.Do not expose to heat, water, moisture, direct sunlight!
8.Clean only with dry cloth.
9.Do not block any ventilation openings. Install in accordance with these instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with
arrowhead symbol within an
equilateral triangle is intended
to alert the user to the
presence of uninsulated
dangerous voltage within the
product's enclosure that may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK. DO
NOT REMOVE COVER (OR
BACK). NO USER-
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONEL.

10.Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
11.Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
12.Only use accessories supplied with the product.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock. To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer servicing to qualified personnel.
15.Bluetooth wireless technology operates within a range of about 10 m (30 feet).
The maximum communication distance may vary depending on the presence of
obstacles (people, metal objects, walls, etc.) or the electromagnetic environment.
ENG2

ENG3
1.Turntable platter
2.45 RPM adaptor
3.Tone arm
4.Tone arm lift
5.Speed selector
6.Auto-stop switch
7.Cartridge
8.Power switch / Volume control
9.Headphone jack
10.DC power jack
11.RCA line out (R&L)
12.AUX IN jack

ENG4
Attaching legs
The turntable comes with its own legs so it can stand alone. Alternatively, the legs can be removed,
and it can sit on a table or shelf. To attach the legs to the turntable, screw each individual leg to
the metal plates on the bottom of the unit.
Initial setup
MAINS CONNECTION
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit.
Your unit is ready to be connected to 5V DC adaptor.
AMPLIFIER CONNECTION (if required)
Whilst you can listen to your new turntable using the built-in speakers you may wish to
connect it to your existing Hi-Fi system. Connect the audio connectors to the Line input on
your mixer or amplifier using an RCA cable (not supplied).
Red plug into R channel.
White plug into L channel.
Playing a record
• Place the record on the turntable. If required, do not forget to place the adaptor on the record spindle.
• Choose the desired playing speed using the speed selector between 33 1/3, 45 and 78 RPM.
• Remove the protective cap from the stylus.
• Turn on the Rotary Power Switch, note that this also controls volume.
• Release the tone arm lock.
• Carefully raise the tone arm.
• Place the stylus vertically over the first track of the record; the turntable will start turning automatically.
• Lower the tone arm slowly on to the record to play.
• When a record comes to an end and the tone arm is returned to the tone arm rest,
the turntable will stop automatically.
• Lift the tone arm and put it on the rest when finished.
• Place the protective cap on the stylus and close the tone arm lock.
Note: If your record stops before the last track finishes, set the auto-stop switch to OFF.
Your record will now play to the end, but you will have to stop the turntable rotation manually.
Auto Stop
• When a record finish playing, it can be controlled by the auto-stop ON/OFF switch.
• Lift the tone arm and put it on the rest when finished.
• Place the protective cap on the stylus and close the tone arm lock.

USB, SD, Bluetooth, FM radio or AUX in mode
Briefly press MODE to select between FM radio, USB, SD, BT and recording files on USB stick/SD card.
For USD/SD recording, insert a USB stick or SD card first. When playing vinyl press and hold
MODE for 3 seconds, then it starts to record and the LED will flash green.
• Press key to stop recording.
• Press to play the previous track.
• Press to play the next track.
• Press briefly to play or pause the music. Press and hold to delete the music stored
on the external source. In recording mode, press to stop recording.
On your Bluetooth device, search “Denver VPR-250” to connect (connected if there
was a remind sound); then you can use skip+ or skip-, play/pause key on your phone.
To activate the record player and stop using Bluetooth, move the tone arm to turntable area.
FM radio settings
Lift the tone arm and put it on the rest, then press the MODE key to choose FM radio Mode.
PressandholdtheMODEkeyforthreesecondstosearchforandsaveradiostationsautomatically.
Press the or to select the previous or next station respectively.
ENG5

ENG6
Maintenance
REPLACING THE STYLUS:
- Refer to the figures 1-8
push the arm lock to
release the tone arm.
take off cap of the
cartridge to expose
the needle out.
separate the cartridge
from the socket lightly.
take off the audio lines
from the cartridge
completely.
to fit a new one, just proceed in the opposite order, insert the audio lines accordingly, and install
the cartridge to the socket lightly.
NOTE: Please exercise extreme care whilst performing this operation so as to avoid
the tone arm and audio lines from any damage.
Maintenance
REPLACING THE STYLUS:
- Refer to the figures 5-6

NOTES:
We advise you to clean your records with an anti-static cloth to gain maximum enjoyment
from them and to make them have a longer service life. We would also point out that for
the same reason your stylus should be replaced periodically (approximately every 250 hours).
Dust the stylus from time to time using a very soft brush dipped in alcohol
(brushing from back to front of the cartridge).
WHEN TRANSPORTING YOUR RECORD PLAYER DO NOT FORGET TO:
• Replace the protective cap on the stylus.
• Put the rest clip into the pick-up arm.
ENG7
Manufacturer’s name or trade mark,
commercial registration number and
address
Shenzhen Shi Guangkaiyuan Technology co., Ltd
91440300053998927w
2 Floor, 41 TianSheng Road, TianLiao village, Guangming,
Shenzhen, Guangdong, PRC.
Modelidentifier
Input voltage
Input AC frequency
Output voltage
Output current
Output power
Averageactivee�ciency
E�ciencyatlowload(10%)
No-load power consumption
GKYPS0100050EU1
AC 100-240V
50/60 Hz
DC 5V
1A
5W
73.62%
69%
0.05W

Please notice - All products are subject to change without any notice. We take reservations for errors and
omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
www.denver.eu
ENG8
Electric and electronic equipment contains materials, components and substances
that can be hazardous to your health and the environment, if the waste material
(discarded electric and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked with the crossed out trash can symbol,
seen above. This symbol signifies that electric and electronic equipment should
not be disposed of with other household waste, but should be disposed of separately.
All cities have established collection points, where electric and electronic equipment
can either be submitted free of charge at recycling stations and other collection sites,
or be collected from the households. Additional information is available at the
technical department of your city.
Hereby, Denver A/S declares that the radio equipment type VPR-250 is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available
at the following internet address: denver.eu and then click the search ICON on topline
of website. Write model number: VPR-250. Now enter product page, and RED directive
is found under downloads/other downloads.
Operating Frequency Range: 87.5MHz--108.0MHz
Max Output Power: 2*2.25W
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark

DENVER A/ S
Om ega 5A,
SoeftenDK-8382
Hinnerup
Denm ark
denver.eu
Contact
Nordics
Headquarter
DENVER A/ S
Omega 5A, Soeften
DK-8382 Hinnerup
Denm ark
Phone: [phone]
(Push 2 for support)
E-Mail
For technical questions, please write to:
[e-mail]
For all other questions please write to:
[e-mail]
Benelux/ France
Phone: [phone]
E-Mail: [e-mail]
Spain/ Portugal
Portugal:
Phone: [phone]
E-Mail: [e-mail]
Germ any
Phone: [phone]
E-Mail
service-germ [e-mail]
Fairfixx Gm bH
Repair and service
Rudolf-Diesel-Str. 3 TOR 2
53859 Niederkassel
(for TV, E-Mobility/ Hoverboards/
Balanceboards, Sm artphones & Tablets)
Tel.: [phone]
E-Mail: [e-mail]
Austria
Lurf Prem ium Service GmbH
Deutschstrasse 1
1230 Wien
Phone: [phone]
E-Mail: [e-mail]
If your country is not listed above,
please write an email to
[e-mail]
DENVER BENELUX B.V.
Barwoutswaarder 13C+D
3449 HE Woerden
The Netherlands
DENVER AS
SPAIN S.A
C/ Moscú, 1 Pol.Ind.Mas de Tous
46185 La Pobla de Vallbona
Valencia (Spain)
Denver Germany Gm bH
Service
Gutenbergstrasse 1
94036 Passau
Spain
Phone: [phone]
Mail: [e-mail]
“ ”
ENG9