Denver TFD-1905 User manual

19"LCD TV DVD Combo
TFD-1905

1.Product Features---------------------------------4
2.Accessories----------------------------------------4
3.Front View------------------------------------------5
4.Rear View-------------------------------------------6
5.Remote Control------------------------------------7
6.Quick start-------------------------------------------9
7.OSD menu-----------------------------------------10
8.DVD operation-------------------------------------15
9.User Help Guide-----------------------------------23
10.Technical Specification-------------------------24

- Input: SCART,VGA,RF,VIDEO,AUDIO,S-VIDEO,PC AUDIO
- Support TV Mode: PAL(B/G,I,D/K),SECAM(B/G,D/K)
- 200 Store channels
- Search TV: auto/manually
- Auto-shut down while no signal input
- Sleep timer
- Program exchange
- Power(DC12V 5A)
Users' Manual Remote Control Adapter Adapter Cable
1.Product Features
2.Accessories
19"LCD TV DVD Combo
TFD-190 5

1(IR)Infrared Receiver:Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
The effective receiving scope for the signal is up to 5-8 meters from the
0
front of the remote control window,and 30 to the left or right side and
0
20 above or below the control window.
2 The functions of the buttons are described as below:
MENU: Press to display the OSD menu, Press again to exit the menu.
CH-/CH+: Press to scan through channels. When pressing and holding down either button
user can scan channels quickly.
They are also can be used to move down/up in the OSD menu screen.
VOL-/VOL+: Press to adjust the volume.
they are also can be used to move left/right in the OSD menu screen.
VOL+ button can be used to skip forward to next menu.
TV/AV: Press to select the source: TV,AV,SVIDEO,PC,DVD,SCART
Power: Turn on/off the TV set.
3.Front View
MENU
CH-
CH+
VOL-
VOL+
TV/AV
load/eject DVD disc
Remote control window(IR)
(keep clear)
Led Indicator
Play/pause stop DVD
Next track or chapter
Previous track or chapter
Insert a disc with the label side facing away

4.Rear View
Coax: Connect to Coaxial cable.
Power: Connect it to the adapter.
SCART: Connect it to the composite jack of your DVD,VCR or other SCART program player.
PC audio: Connect it to the audio output jack of your computer.
VGA: For PC display purpose. Connect it to the Mini D-Sub 15 pins analog output jack of
the PC.
AV-R AV-L: Connect them to the audio output jacks of your DVD/VCR,and S-Video audio
input signals share these terminal.
Video: Connect it to the video output jack that has video output.
S-Video IN: Connect it to the S-Video output jack of your VCR or other video equipment
that has S-Video.
RF: Connect antenna or cable 75 Ohm coaxial Aerial to receive TV signal.
DVD

DISPLAY
10

Buttons for DVD functions
4. : load/eject DVD disc.
5. : play/pause DVD program.
6. : stop DVD program.
17 ZOOM: adjust picture size in DVD mode.
18 SUBTITLE: turn on/off the DVD subtitle display.
19 LANGUAGE: select DVD disc language.
20 SEARCH: DVD search, Tracks or Chapters.
21 MENU: DVD play list/Disc menu.
22 ANGLE: select DVD picture angle.
23 SETUP: DVD system setup.
24 TITLE: DVD title.
25 : DVD fast forward.
26 : DVD previous chapter.
27 : DVD fast reverse.
28 : DVD next chapter.
29 SLOW: play DVD programs at slow speed.
30 REPEAT: play the title or chapter once again.
31 PROGRAM: edit the program and play.
32 A-B: select and play the preferable paragraph of
DVD program by pressing this key twice at the
beginning and end of it.