Denver TFD-1904DVBT User manual

19 TFT LCD TV+DVD COMBO"
Operating Instructions
TFD-1904DVBT
AC 110-240V 50/60Hz
SCART IN, PC IN
TELETEXT
NTSC PLAYBACK
INSIDE DVD
SUPPORT FORMAT: SVCD, VCD, WMA, HDCD,
KODAK PICTURE CD, DVD
MPEG4
PAL/SECAM B/G,D/K, I

TABLE OF CONTENTS
1
3
4
Table of Contents 1
2
20-21
Specifications
Installation
8
12-13
9
Setup
Functional Parts(TV)
Remote Control unit
TELETEXT Operations 14
Important Safety Instruction
Warnings and Cautions 5-7
10
Functional Parts(DVD)
11
Rear view of TV set
Remote Control Operation(DVD)
15-16
17
Inital Settings(DVD)
26
27
Troubleshooting Tips
The Causes of interference
MENU Screens
18-19
Remote Control Unit
DVBT Setup Menu Setting 22-25

OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVDMENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVDSETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-TMENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE
SPECIFICATIONS
2
REMOTE CONTROL
Transmitting System :Infrared
Power Supply :DC 3V
Receiving System:
Colour System:
LCD Panel: 482.6mm(19 inch) diagonal
Ext.Antenna:
Ext. In/Out:
Speaker:
Audio Output:
Power Consumption:
75 Ohm Coaxial Cable
PC Input, SCART IN
16 Ohm x 2
AC 110-240V 50/60Hz,60W
Dimension:
Net Weight:
W466 xD198.8 xH415.7(mm)
7.0KG
3W
Note:Design and specifications are subject to change without prior notice.
PAL, SECAM
B/G, D/K, I

3
Thank you verymuch for yourpurchase of thisproduct, the mostnatural Colour TelevisionReceiver.
To enjoy yourset to thefull from thevery beginning, readthis manual carefullyand keep ithandy for ready
reference.
INSTALLATION
Locate the receiverin the room where direct light does not strike the screen.
Total darkness ora reflection onthe picture screen can cause eyestrain. Soft and indirect lighting is
recommended for comfortableviewing.
Allow enough spacebetween the receiver and the wall to permit ventilation.
Avoid excessively warmlocations to prevent possible damage to the cabinet or premature component
failure.
This TV operateson a DC supply provided by the AC-DC adaptor. The voltage is as Indicated on the label
on the backcover.Only use theAC-DC adaptor supplied with the TV and never apply an AC mains to the TV
directly. The AC-DCadaptor operates onand AC mains supply, the voltage is as indicated on the label of
the AC-DC adaptor.Connect the DCplug of the AC-DC adaptor to the DC 12V socket at the back of the TV.
Connect the AC-DCadaptor and itsmains cord. Insert the mains plug in the wall socket having a mains
voltage of 110-240V.
Do not installthe receiver ina location near heat sources such as radiator, air ducts, direct sunlight ,or
in a placesomewhere like closecompartment and close area.
Do not coverthe ventilation openingswhen using the set.
CAUTION
Never tamper withany components insideyour set, orany other adjustmentcontrols not mentionedin
this manual. TheLCD panel usedin this productis made ofglass. Therefore,it can break When the product
is dropped orapplied with impact.Be careful notto be injuredby broken glass pieces in case the LCD panel
breaks.When you cleanup dust orstick of awater drop onthe LCD panel. The power cord should be pulled
out from theplug receptacle, thenwipe the receiverwith dried softcloth .During thunderand lighting ,
unplug the powercord and antennacord to preventyour TV setfrom damage. Alltelevision receivers are
high voltage instruments.All "inside work"on your receivershould be performedonly by theTV service
personnel.
If some abnormalphenomena happens ,may be youhave some mis-opertion,pleasetake off powerand
restart your TVset .
INSTALLATION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
The lighting flash with arrow head within a triangle is intended to tell the user that
parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and servicing instructions are in the papers with the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTION
4

5
Caution
Do not dropor push objectsinto the television cabinet slots
or openings. Neverspill any kind of liquid on the television
receiver.
Caution
Do not insertanything in theventilation holes. Ifmetal or
something flammable enters,it may resultin fire orelectric shock.
Caution
Do not placeobjects on thisunit, it may damage the screen surface.
Caution
Do not squashpower supply cordunder the televisionreceiver.
Caution
Do not throwanything at theset. The screenglass may explodeby
impact and causeserious injury.
WARNINGS AND CAUTIONS

6
Caution
Never stand on,lean on, orsuddenly push the television or its
stand. You shouldpay special attentionto children. Serious injury
may result ifit should fall.
Caution
Do not placeyour television onan unstable cart, stand ,shelf or
table. Serious injuryto an individual,and damage tothe television,
may result ifit should fall.
Caution
When the televisionreceiver is notused for anextended period of
time, it isadvisable to disconnectthe AC powercord from theAC
outlet .
Caution
Do not blockthe ventilation holesin the backcover.
Adequate ventilation isessential to preventfailure of electrical
component.
Warning
Avoid exposing thetelevision receiver to direct sunlight and other
source of theheat. Do notstand the television receiver directly on
other produces whichgive off heat .E.g.video cassette players.
Audio amplifiers. Donot place naked flame sources, such as
lighted candle onthe television. Donot expose the LCD screen
surface to thesun, it maydamage the screen surface.
WARNINGS AND CAUTIONS

WARNINGS AND CAUTIONS
7
Take care notto connect manyappliances to the same mains
socket as thiscould result in fire or electric shock.
High voltages areused in theoperation of this television receiver.
Do not removethe cabinet backfrom your set. Refer servicing to
qualified service personnel.
To prevent fireor electrical shock hazard, Do not expose the
television receiver torain or moisture.
For you ownsafety, Do nottouch any part of the set, main lead or
aerial lead duringlighting storms.
Caution
If the televisionis to bebuilt into aCompartment or similarly
enclosed, the minimumdistances must bemaintained.
Heat build-up canreduce the servicelife of yourtelevision, and can
also be dangerous.
Warning
Warning
Warning
Warning

¼ò ½é¼ò ½é
SETUP
8
Remote Control Battery Installation
4.If you cause a staticdischarge when touching the
unit, and the unit failsto function, simply unplug
the unit from the ACoutlet, wait a few minutes,and
plug it back in. Theunit should return to normal
operation.
Requires two AAA batteries(supplied).
Procedure
1. Turn the remote control face down. Remove battery
cover by pressing down on the marking on the
cover and sliding it off in the direction indicated.
2. Install batteries matching(+) and(-) polarity signs.
3. Replace the battery cover by sliding in reverse until
the lock snaps.
Note: Incorrect installation can cause battery leakage
and corrosion that will damage the Remote
control.
Precautions
Replace batteries in pair.
Do not mix battery types(zinc carbon with
alkaline).
Do not recharge, heat, short-circuit,
disassemble, or burn batteries.

FUNCTIONAL PARTS(TV)
Front View ofLCD Set
To turn theTV power ON
Put the TVset on thecorrect place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket
at the backof the TVset. Connect the adaptor main cord to the wall outlet ,then the LED indicator lamp
turns red/green andthe TV setis at Standby/work Mode. At StandbyMode, if Standby Button is pressed
the power indicatorwill change togreen. It takes a few seconds before the picture appears.
To turn theTV power OFF
Press the StandbyButton to makethe TV set in Standby Mode, then disconnect the power plug from the
wall outlet.
NOTE
If TV isthe selected inputwithout signal received and NO operation is performed for about 5 minutes
continuously, the TVset will enterstandby mode. For any inputs other than TV, the TV set will not enter
standby mode automaticallywithout users instruction.If you are not going to use this TV set for a long
time, switch offthe set anddisconnect the power plug from the wall outlet.
9
2. Remote Sensor
1. LED indicator lamp
3. Standby Button
4. TV/DVD Button
5. MENU Button
6. P+ Button
7. P- Button
8. V+Button
9. V- Button
V- V+ P- P+ MENU TV/DVD
1
987654
2
3

FUNCTIONAL PARTS(DVD)
10
2. Open/Close
1. DVD Slot
3. Stop
4. Play/Pause
Switch this LCD-TVSet to DVDstatus, insert the disk to DVD slot, and the player will suck it in.
Notes:
1.Do not attachany seal orlabel to either side (the labeled side or the recorded side) of a disc.
2.Do not useirregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in
malfunctions.
3.Some playback operationsof DVDs and Video CDs may be intentionally programmed by software
manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the
software manufacturer, thereforesome playback features may not be available or other functions
may be added.
1
2
3
4

REAR VIEW OF TV SET
DC IN 12V
HEADPHONE
PC IN
FULL-SCART
NOTE
Precautions when connecting to other equipment
When using external equipment with this TV set, please read the instruction manual of the external equipment.
Switch off all power supplies to the equipment and TV set before connection.
Always ensure that the input and output terminals are correctly connected.
TO DC IN 12V
TO POWER SOURCE
RF INPUT(ANT.)
11
Full-SCART
VGA
AUDIO
ANT.
PCIN
DC IN 12V

REMOTE CONTROL UNIT
POWER ON/STANDBY button
Press this button to switch on the TV when at standby mode orenter
standby mode.
MUTE button
Press this button to mute or restore sound.
P.P Button
Press this button to select the desired picture mode:
NORMAL/SOFT/RICH/CUSTOM.
DISPLAY Button
Press this button to display the setting on the screen.
SLEEP Button
Press this button to set the sleep timer, the order
shown below(minutes):
0 - 15 - 30 - 45 - 6 0
When the preset length of time has passed, the TV set
enters standby mode.
AV/TV/DVD Button
Press ¡°AV/TV/DVD¡± button,the will be some word show on the right top
of the screen, press ¡°PROG+/-¡± to select the AV source, and then
press ¡°VOL+/-¡±to enter AV mode.
DIGIT Button(0-9)
This TV allows you to select channels from 0 to 255.
Press this button to select one-digit,two digit or three -digital channels
input options.
To select a one-digit channel(e.g. Channel 8),press this ¡°-/--¡±button
to change channel selection to ¡°-¡±on screen display and press the
¡°8¡±button only.
To select a two-digit channel(e.g. Channel 28),press this ¡°-/--¡±button
to change channel selection to ¡°--¡±on screen display and press¡°2¡±
and ¡°8 ¡± buttons. To select a three-digit channel(e.g. Channel 128),
press this¡°-/--¡±button to change channel selection to ¡°---¡±on screen
display and press¡°1¡±,¡°2¡±and ¡°8¡± buttons.
12
TV
PC
SCART
DVD
DVB-T
P.PP.P
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE

FROM CH 0
TO CH 7
SAVE
MENU Button
Press this button to enter the menu screens for various optional
adjustable settings.
PROG+/- Button
Press the program up button to select the program forwards. Press
the program Down button to select the program Backwards.
VOL+/- Button
Press volume up/down buttons to adjust sound level.
Q.VIEW Button
Press this button to return to the previously viewed program.
SWAP Button
You can adjust your TV program list order, press this button, the
program swap menu will displayed, as shown below. E.g. to swap
channel 0 and 7 , press¡°SWAP¡± button, press¡°PROG+/-¡± to
choose .FROM and press ¡°VOL+/-¡± to set the channel number as
¡°0¡±,and as the same way to set the TO as¡°7¡±,last to do choose
the¡°SAVE¡± and press ¡°VOL+/-¡± to implement this fuction.
REMOTE CONTROL UNIT
13
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE

TEXT Button
Press this button to enter or exit the teletext mode.
INDEX Button
Press the button to go to the index page.
REVEAL Button
Press this button to reveal the hidden information for
some Teletext pages(e.g. answers to puzzles or riddles).
Press again to hide the information.
MIX Button
Press this button enter to mix mode.(For SUBTITLE or
NEWSFLASH page, please use mix mode).
Press this button again to exit.
SIZE Button
Press this button to change the Teletext screen display
mode among the following:
- Upper half screen enlarged
- Lower half screen enlarged
- Normal screen state
STOP Button
Press this button to hold the Teletext page on display to prevent the
page from changing. Press again to release the hold state.
SUB.PAGE
Press this button to display subpage.
COLOUR Button (optional)
Press this button to access directly to the
corresponding pages displayed at the lower part of the Teletext screen.
TELETEXT OPERATIONS
For models withTeletext function only.
14
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE

REMOTE CONTROL OPERATION(DVD)
15
DVD Mode:
POWER
Press this buttonto switch televisionon or off.
OPEN/CLOSE Button
Press OPEN/CLOSE buttonto load discon disc tray.Hold the disc
without touching eitherof its surfaces,position it withthe printed
title side facingup, align itwith the guides,and place itin its proper
position. In caseof interactive DVDswith playback control,a menu
appears on theTV screen.
DVD MENU Button
If play someDVD discs, press this button back to root menu screen.
PROGRAM Button
Place a trackon the program list.
Press PROGRAM button,then the ¡°PROGRAM¡± will
appear on TV screen now youcan press¡°> ¡÷¨Œ¡±
and¡°ENTER¡±button to select¡°START¡± option and
enjoy the desiredtracks.
SUBTITLE Button
To press thisbutton, you canchange the subtitle language from one
selected to theinitial settings toa different language, if available.
DVD SETUP Button
You can enjoypicture frame forward by pressing this button.
AUDIO Button
To press thisbutton, you canchange the audio language from the
one selected atsettings to adifferent language, if available.
> ¡÷¨Œ
GOTO Button
Press this buttonto go todesired position. The player provides 3
search mode Whenthe above itemsare showed on TV screen, you
can input numberto locate desiresector, then press PLAY to
commence play Thenumber you input is invalid if it is beyond the
track's capcity.
DISPLAY Button
To display playerOSD.
PREV/NEXT Button
Press these buttonto go tothe previous/next chapter(DVD).
FR/FF Button
These buttons allowskipping ahead/back at5-level speed. Press
¡°PLAY¡±button to returnto normal playback.
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE

REMOTE CONTROL OPERATION(DVD)
16
DVD Mode:
REPEAT Button
To press thisbutton you canrepeatedly play atitle(DVD) or all
tracks(CD) when¡°ALL ¡±appears on TV screen, you can
repeatedly play achapter (DVD) ora single track(CD)when¡°Repeat
chapter¡±appears on TVscreen, you can cancel repeat functions
when no¡°Repeat off¡±appears on TVscreen.
PLAY/PAUSE Button
Press this buttonto start playback. Press this button again to
pause playback.
STOP Button
When this buttonis pressed once,the unit records the stopped
point, from whereplayback will resume (resume function) if
¡°PLAY¡±is pressed afterwards. But ifSTOP button is pressed
again instead ofPLAY button, therewill be no resume function.
TITLE button
DVD disc:
Press TITLE button, then the DVD menu or titles available on the disc
will be displayed. Then you can use " " and ENTER button to select
programs.
ANGLE button
If the disccontains scenes recordedat different cameraangles, you
can change toa different cameraangle during playback.Press
ANGLE repeatedly duringplayback to selecta desired angle.Note
that the numberof the currentangle appears onscreen.
Note:
The angle indicatorwill blink onthe TV screenduring scenes
recorded at differentangles as anindication that angleswitching
is possible.
N
Note:Zoom may notwork on someDVDs.
N
ZOOM button
1.Press ZOOM duringplayback or still playback to activate the
Zoom function. Thesquare frame appears briefly in the right bottom
of the picture.
2. Each pressof the ZOOMbutton changes the TV screen in the
following sequence:
3. Use the buttons to movethrough the zoomedpicture.
4. To resumenormal playback, press ZOOM button untilscreen
becomes 1X.
SLOW Button
Press this button during playback to activate the slow function.
Each press on this button change the TV screen in the follow
sequence:1/2 - 1/4 - 1/8 - 1/16 normal play
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE

17
FORMAT: used to change the TV picture aspect
SUB.T(SUBTITLE): used to switch subtitles on or off
INFO: used to display information for the channel being viewed
RECALL: reverts to previous channel
EXIT: used to return to TV
DVBT-MENU: used to open and close the menu windows
TEXT: used to open the interactive digital text
PAGE</>:digital text page up and down
EPG: Electronic Programmer Guide used to open and close the EPG
FAV: Favorites Button used to open the favorites menu
RADIO: to switch between TV picture and FM audio signal
LANG: LANGUAGE to open or close the language menu
PAUSE: to pause or play the picture
ENTER: used to confirm a selection within a menu
REMOTE CONTROL UNIT (DVB-T)
OPEN/CLOSE POWER
P.PP.P
SWAPSWAP
Q.
VIEW
Q.
VIEW
REPEAT
MUTE TV/AV/DVD
MENU
PROG+
PROG-
VOL+
VOL-
REVEAL SIZE STOP
INDEX TEXT
MIX
DVD MENU PROGRAM SUBTITLE
AUDIO
DISPLAY
DVD SETUP GOTO
ENTER
-/---/--
ANGLE SLOW TITLE ZOOM
SUB.PAGE
FORMAT SUB.T INFO RECALL
EXIT DVB-T MENU TEXT
SYS.
PAGE PAGE
FAV
EPG
AUDIO
RADIO LANG PAUSE
DVB-T Mode:
AUDIO:To press thisbutton, you canchange the audio
language from theone selected atsettings to adifferent language,
if available.

MENU SCREENS
PICTURE MENU
You can adjust the contrast, brightness, tint(NTSC only)
colour,sharpness.
COLOUR TEMP: NORMAL / WARM / COOL
PICTURE MODE: NORMAL / SOFT / RICH /CUSTOM
SOUND MENU
Enter sound menu, you can adjust VOLUME.
TUNE MENU
AUTO SCAN: Press¡°VOL+/-¡±to begin auto search
program, and press menu to exit auto search.
CHANNEL: The number is the current channel, and you
can also change channel from one to another.
COLOUR SYS. PAL/NTSC/SECAM (optional)
SOUND SYS. B/G,D/K,I,M,L,L¡¯(optional)
SKIP: Set this item on to skip the channel which you are
watching.
MANUAL: To start searching until a program is
searched, or press¡°MUNE¡± to exit.
Fine Tune: Frequency data can be fine-tuned in upward
or downward by the VOL+/- buttons.
This TV allows you to adjust any setting from the menu screens using ¡°MENU¡±,¡°VOL+/-¡±and ¡°PROG+/-¡±
buttons.
Press ¡°MENU¡±button to display the menu, press¡°PROG+/-¡±to change menu from one to another, ¡°VOL+/-¡±
to enter the chosen menu, press¡°PROG+/-¡±to select the item, and then press ¡°VOL+/-¡±to adjust each
item.
Press ¡°MENU¡± again to exit the menu mode.
18
CH
PICTURE
CONTRAST
BRIGHTNESS
TINT
COLOUR
SHARPNESS
COLOUR TEMP
PICTURE MODE
COOL
NORMAL
ADJUST SELECT EXIT
SOUND
VOLUME
CH
TUNE
COLOUR SYS. PAL
AUTO SCAN
CHANNEL 1
SOUND SYS. B/G
SKIP OFF
MANUAL
FINE TUNE
152.25MHz
152.25MHz
CH
ADJUST SELECT EXIT
ADJUST SELECT EXIT