Devolo GIGAGATE User manual

INSTALLATION

1
Base

2
02 | 03
Satellite

3
Base

04 | 05
Satellite

4a
Satellite
WiFi key

06 | 07
WiFi key
wwwwww

Satellite
4b WPS

08 | 09
1 min.

NAS
TV
Satellite

10 | 11
Software
www.devolo.com/gigagateDownload Software:

OPTIONAL WiFi Clone
<
<
<
W
i
F
i
-
N
a
m
e
>
>
>
P
a
s
s
w
o
r
d
<
<
<
W
i
F
i
-
N
a
m
e
>
>
>
P
a
s
s
w
o
r
d
<
<
<
devolo-123
Home Wi-Fi
Wi-Fi
Choose your network
devolo-123
Wi-Fi
Choose your network

12 | 13
| DE | Richten Sie WiFi Clone ein
Mit WiFi Clone können Sie Ihre WLAN-Zugangsdaten des Routers
mit dem devolo GigaGate Satellite synchronisieren. Hierfür
werden per Knopfdruck die Zugangsdaten vom Router an den
devolo GigaGate Satellite übertragen. So erhalten Sie in jedem
Raum die optimale WLAN-Abdeckung.
| GB | Set up WiFi Clone
WiFi Clone allows you to synchronise your router WiFi access data
with the devolo GigaGate Satellite. For this purpose, the access
data from the router are transmitted to the devolo GigaGate
Satellite at the touch of a button. This gives you optimal Wi-Fi
coverage in any room.
| FR | Congurez WiFi Clone
WiFi Clone vous permet de synchroniser vos données de connexi-
on Wi-Fi du routeur sur le Satellite devolo GigaGate. Les données
de connexion sont transmises du routeur au Satellite par simple
pression de bouton. Vous aurez alors la couverture Wi-Fi optimale
dans chaque pièce.
| NL | Congureer de WiFi Clone
Met WiFi Clone kunt u uw WiFi-toegangsdata van de router met
de devolo GigaGate Satellite synchroniseren. Hiervoor worden
met een druk op de knop de toegangsdata van de router aan de
devolo GigaGate Satellite overgedragen. Zo krijgt u in elke kamer
de optimale WiFi-dekking.
| ES | Congure WiFi Clone
Con WiFi Clone puede sincronizar sus datos de acceso Wi-Fi del
router con la GigaGate Satellite de devolo. Para ello, los datos de
acceso del router se transmiten a la GigaGate Satellite de devolo
con solo pulsar un botón. De este modo dispondrá de una cober-
tura Wi-Fi óptima en todas las habitaciones.
| PT | Instale o WiFi Clone
Com o WiFi Clone pode sincronizar os seus dados de acesso
Wi-Fi do router com o satélite devolo GigaGate. Para o efeito, os
dados de acesso são transferidos do router para o satélite devolo
GigaGate, pressionando o botão. Obtém deste modo a cobertura
Wi-Fi ideal em todos os compartimentos da casa.
| IT | Installazione di WiFi Clone
WiFi Clone consente di sincronizzare i dati di accesso Wi-Fi del router
con il satellite devolo GigaGate. Basta premere il pulsante e i dati di
accesso del router vengono trasferiti sul satellite devolo GigaGate. In
questo modo ogni stanza avrà la copertura Wi-Fi ottimale.

1
Base
max. 10m

14 | 15
Satellite
> 50 sec.

Satellite
WPS
2

16 | 17
2 min.
3

Base Satellite

18 | 19
WLAN an
Keine Verbindung
Verbindungsaufbau
Verbindungsqualität
Boot-Prozess
Betriebsbereit
LED leuchtet weiß
LED leuchtet weiß
LED leuchtet weiß/rot
WPS-Modus
LED blinkt weiß
LED blinkt weiß
LED blinkt weiß
LED blinkt rot
LED leuchtet weiß
LED leuchtet weiß
LAN-Anschluss 1-4
Gigabit-Anschluss
WLAN
Verbindung
Base/Satellite
Power
DE
LED/Taster
Gigabit-Anschluss belegt
LAN-Anschluss belegt
WiFi Clone ausführen
Gerät aus dem Netzwerk entfernen
Langes Drücken (>3s)
Langes Drücken (>10s)
WPS-Funktionalität starten
Pairing starten
Kurzes Drücken
Kurzes Drücken
LED
LED
LED
LED
LED
Taster
Taster
Taster Reboot des Gerätes
Zurücksetzen auf WerkseinstellungLanges Drücken (bis Power LED blinkt)
Kurzes Drücken
Reset

Wi-Fi on
No connection
Connection set-up
Connection quality
Boot process
Ready to operate
LED lights up white
LED lights up white
LED lights up white/red
WPS mode
LED ashes white
LED ashes white
LED ashes white
LED ashes red
LED lights up white
LED lights up white
Ethernet port 1-4
Gigabit port
Wi-Fi
Base/Satellite
connection
Power
GB
LED/Button
Gigabit port connected
Ethernet port connected
Run WiFi Clone
Remove device from the network
Hold down (>3s)
Hold down (>10s)
Start WPS function
Start pairing
Press briey
Press briey
LED
LED
LED
LED
LED
Button
Button
Button Reboot the device
Reset to factory defaultHold down (until Power LED ashes)
Press briey
Reset