DeWalt DCHJ064 User manual

INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
DCHJ060, DCHJ061, DCHJ062, DCHJ063, DCHJ064, DCHJ065, DCHJ066, DCHJ067,
DCHJ068, DCHJ070, DCHJ071
Heated Jacket
Veste chauffante
Chaqueta con calefacción incorporada
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com

Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT
(1-800-433-9258).
WARNING: To reduce the risk of injury, read the instruction
manual.
These heated jackets are designed to use DEWALT 12V Max* and
20V Max* lithium ion battery packs and the DCB091 USB power
source.
Heated Jacket Safety Warnings
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
• Do not wear the heated jacket if the power button does not
turn it on and off. Any heated jacket that cannot be controlled
with the power button is dangerous.
• Disconnect the battery from the power cable and remove
the battery pack and DCB091 USB power source from the
battery/power source pocket before storing or washing the
heated jacket. Such preventive safety measures reduce the risk
of the heated jacket starting accidentally.
• This heated jacket is not to be worn by an infant, child,
helpless person, person with poor blood circulation or any
person with a sensitivity to overheating. Store heated jackets
out of the reach of children and do not allow persons unfamiliar
with the heated jacket or these instructions to wear the heated
jacket.
• Use the heated jacket in accordance with these instructions,
taking into account the environment the jacket is to be
worn. Use of the heated jacket for operations different from those
intended could result in a hazardous situation.
• Some medical conditions, medical devices or medications
can cause sensitivity to heat. Consult the device manufacturer
or/and your physician to determine if use of this product is
appropriate.
• Do not allow the heating elements to touch bare skin. To
reduce the risk of injury, always wear a garment between the
heated jacket and bare skin.
• Turn off power to heated jacket immediately if any
discomfort occurs.
• Do not allow cord to get tangled in zipper. Before wearing
heated jacket ensure electrical wiring is not damaged or
pinched. Do not use if cord is damaged. Fire may result.
English
1

• Do not attach pins or any other object to the heated jacket.
Doing so may damage the electrical wiring.
• If heated jacket does not operate properly discontinue use
immediately.
• DO NOT dry clean. DO NOT use bleach. Cleaning solvents
may damage or lessen the effect of the jacket's insulated
heating element.
• Follow the CARE label in the jacket and the instructions
under the Cleaning section of this manual.
• ONLY plug the heated jacket into the 12V power jack on the
DCB091 USB power source.
• Ensure the battery/power source pocket is zippered shut when
wearing the heated jacket in rain or in wet conditions. The zippered
battery/power source pocket protects the battery pack and the
DCB091 USB power source from getting wet, which could result
in fire or other personal injury.
DCB091 USB Power Source Safety
Warnings
WARNING: This manual contains important safety and operating
instructions for this DCB091 USB power source. Before using the
DCB091 USB power source, read this manual and all labels on the
DCB091 USB power source, battery pack, charger and product(s)
using the power source.
• Shock hazard. Do not allow any liquid to get inside the DCB091
USB power source. Electric shock may result.
• Burn hazard. To reduce the risk of injury, use only DEWALT 12V
Max* and 20V Max* lithium ion battery packs with the DCB091
USB power source. Do not attempt to use it on any other battery
packs. Other types of batteries may overheat and burst resulting
in personal injury and property damage.
• This DCB091 USB power source is not intended for any
uses other than supplying power/charging small USB
electronics. Any other uses may result in risk of fire, electric
shock or electrocution.
• Do not operate the DCB091 USB power source if it
has received a sharp blow, been dropped or otherwise
damaged in any way. Take it to an authorized service center.
• Do not disassemble the DCB091 USB power source, there
are no user serviceable parts.
• The label on your product may include the following symbols. The
symbols and their definitions are as follows:
V......................volts A ..................amperes
Hz....................hertz W .................watts
or AC..........alternating or DC ..direct current
or AC/DC...alternating .................safety alert
........................or direct current ..................symbol
.....USB connection
Important Safety Instructions for All
Battery Packs
When ordering replacement battery packs, be sure to include the
catalog number and voltage. Consult the chart at the end of this
manual for compatibility of chargers and battery packs.
The battery pack is not fully charged out of the carton. Before using
the battery pack and charger, read the safety instructions below and
then follow charging procedures outlined.
READ ALL INSTRUCTIONS
• Do not charge or use the battery pack in explosive
atmospheres, such as in the presence of flammable liquids,
gases or dust. Inserting or removing the battery pack from the
charger may ignite the dust or fumes.
English
2

• NEVER force the battery pack into the charger. DO NOT
modify the battery pack in any way to fit into a non-
compatible charger as battery pack may rupture causing
serious personal injury. Consult the chart at the end of this
manual for compatibility of batteries and chargers.
• Charge the battery packs only in designated DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the heated jacket and battery pack
in locations where the temperature may reach or exceed
105°F (40°C) (such as outside sheds or metal buildings in
summer). For best life store battery packs in a cool, dry location.
NOTE: Do not store or leave jacket unattended with battery pack
connected to jacket.
WARNING: Fire hazard. Never attempt to open the battery pack
for any reason. If the battery pack case is cracked or damaged, do
not insert into the charger. Do not crush, drop or damage the battery
pack. Do not use a battery pack or charger that has received a sharp
blow, been dropped, run over or damaged in any way (e.g., pierced
with a nail, hit with a hammer, stepped on). Damaged battery packs
should be returned to the service center for recycling.
WARNING: Fire hazard. Do not store or carry the battery
pack so that metal objects can contact exposed battery
terminals. For example, do not place the battery pack in aprons,
pockets, tool boxes, product kit boxes, drawers, etc., with loose nails,
screws, keys, etc. Transporting batteries can possibly cause
fires if the battery terminals inadvertently come in contact
with conductive materials such as keys, coins, hand tools
and the like. The US Department of Transportation Hazardous
Material Regulations (HMR) actually prohibit transporting batteries in
commerce or on airplanes (e.g., packed in suitcases and carry-on
luggage) UNLESS they are properly protected from short circuits. So
when transporting individual battery packs, make sure that the battery
terminals are protected and well insulated from materials that could
contact them and cause a short circuit.
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (Li-Ion)
• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can
explode in a fire. Toxic fumes and materials are created when
lithium ion battery packs are burned.
• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If battery
liquid gets into the eye, rinse water over the open eye for
15minutes or until irritation ceases. If medical attention is needed,
the battery electrolyte is composed of a mixture of liquid organic
carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persist, seek medical
attention.
WARNING: Burn hazard. Battery liquid may be flammable if
exposed to spark or flame.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on
the nickel cadmium, nickel metal hydride or lithium ion batteries
(or battery packs) indicate that the costs to recycle these batteries
(or battery packs) at the end of their useful life have already been
paid by DEWALT. In some areas, it is illegal to place spent nickel
cadmium, nickel metal hydride or lithium ion batteries in the trash or
municipal solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC™, in cooperation with DEWALT and other
battery users, has established programs in the United
States and Canada to facilitate the collection of spent
nickel cadmium, nickel metal hydride or lithium ion
batteries. Help protect our environment and conserve
English
3