Dexcom G6 Instruction Manual

Instructions For Use
START HERE
Set up

Dexcom G6 CGM (G6) Overview
Transmitter
• Sends glucose information from
sensor to display device
All graphics are representational. Your product may look different.
Review the Safety Statement in Using Your G6, Chapter 2 before using your G6.
Display Device
• Shows glucose information
• Set up your smart device, Dexcom
receiver, or both
• For a list of current compatible smart
devices and operating systems go to:
dexcom.com/compatibility
• The G6 app and receiver are
compatible with all G6 systems
Applicator
Sensor
(inside)
Applicator With
Built-in Sensor
• Sensor applicator inserts sensor under
your skin
• Sensor gets glucose information
Your smart device
Dexcom
receiver

What It Does
The G6 sends G6 sensor glucose readings
(G6 readings) to your display device.
The receiver is a dedicated medical device. Your smart
device is not, even though you can run the G6 app on it. Your
smart device is not a dedicated medical device because the
app could miss an alarm/alert just because it is on a smart
device—for example, due to smart device settings, smart
device or app shutting off, low battery, etc.
Use tabs below to set up the app,
receiver, or both
Want to set up both? Pick one to set up first and turn to
that tab. The last step shows you how to set up the second
display device. Do not use both tabs.
For other ways to learn how to set up your G6:
• Watch the tutorial at: dexcom.com/downloadsandguides
• Contact Technical Support
Your smart device
Dexcom
receiver
Choose App, Receiver, or Both

Set Up App
Your smart device
TransmitterApplicator with
Built-in Sensor

1When prompted:
• Send your data to the cloud.
This lets you use:
• Share: Send your G6 data to followers.
• CLARITY: Reflect on data with our
healthcare professional; see patterns.
• Enter your Sensor code
(from the sensor applicator you will insert).
• No sensor code?
See Using Your G6, Appendix A Troubleshooting.
BFollow onscreen setup instructions
ADownload and open the Dexcom G6 app
Step 1: Set Up App
Accept
Decline
Consent to Share Data
with Dexcom
Confirm

CWait 2 hours
• When sensor warm-up is complete, tap OK to
see the home screen
• Now you get G6 readings and alarm/alerts
• Enter your Serial Number (SN) from:
or
Back of transmitterTransmitter box
2See the blue sensor warmup timer?
That means your sensor is getting used to
your body.
During warmup:
• No G6 readings or alarm/alerts
• Always keep smart device within 6 meters
of transmitter
Sensor Warmup
Sensor warmup successful and setup
complete. Sensor glucose readings
now available.
OK
After you enter your SN, your G6 searches for the transmitter. While it is
searching, you will not get G6 readings or alarm/alerts.

Turn on the receiver by pressing and holding the
power button down for 2-3 seconds. Then follow
onscreen instructions.
Do not use the Set Up Receiver tab in these
instructions. Those steps are for setting up the
receiver before setting up the app.
Learn how to:
• Read your home screen
• Use alarm and alerts
• Make treatment decisions
• Troubleshoot issues
Welcome
Next
Step 2: See Using Your G6
Step 3: Optional – Set up Receiver

Set Up Receiver
Receiver
TransmitterApplicator with
Built-in Sensor

CFollow onscreen instructions
Step 1: Set Up Receiver
1When prompted, enter your:
• Sensor code from the sensor applicator you will insert
• No sensor code?
See Using Your G6, Appendix A Troubleshooting
Press power button for 2-3 seconds.
ATake receiver out of box
BTurn on receiver

• Serial Number (SN) from:
Back of transmitterTransmitter box
2You are done with this step when you see
this screen:
Next
Insert & Attach
1. Insert sensor.
2. Attach transmitter.
See product
instructions for details.
or
After you enter your SN, your G6 searches for the transmitter. While it is
searching, you will not get G6 readings or alarm/alerts.

Step 2: Use Applicator to Insert
Built-in Sensor
ATake applicator with
built-in sensor out of
sensor box
BPick sensor site
CUse applicator to insert built-in sensor
2Peel off adhesive backings.
Do not touch adhesive.
1Wash and dry hands. Clean
sensor site with alcohol wipe.
XXXX
Avoid bones, irritated skin, tattoos, and areas that get bumped.
18 years and older 2-17 years
or
Gather materials: applicator (with code
you just entered), transmitter, and wipes.

4Fold and break off safety
guard.
6Remove applicator from skin
leaving patch and holder on.
3Place applicator on skin.
5Press button to insert sensor.
7Throw away applicator.
Follow local guidelines for
blood-contacting components.

Step 3: Attach Transmitter
ATake transmitter out of box
BSnap in transmitter
4Rub around patch 3 times.3Snap in transmitter. It clicks
into place. Make sure it is flat
and snug in holder.
1Clean transmitter with alcohol
wipe.
Tab
Slot
2Insert transmitter, tab first,
into holder.

BTap Start Sensor to begin 2-hour warmup
CWait 2 hours
Step 4: Start Sensor on Receiver
AWait up to 30 minutes for pairing
Start Sensor
During warmup you will not get
G6 readings or alarm/alerts
During pairing:
• No G6 readings or alarm/alerts
• Always keep receiver within 6 meters
of transmitter
• When complete, tap Next to go to home screen
• Now you get G6 readings and alarm/alerts

Learn how to:
• Read your home screen
• Use alarm and alerts
• Make treatment decisions
• Troubleshoot issues
Download the app onto your smart device and open it.
Then follow onscreen instructions.
Do not use the Set Up App tab in these instructions.
Those steps are for setting up the app before setting
up the receiver.
Step 5: See Using Your G6
Step 6: Optional - Set up App
Let's Get Started

© 2019 Dexcom, Inc. All rights reserved.
Covered by patents dexcom.com/patents.
Dexcom, Dexcom G6, Dexcom Share, Dexcom Clarity, and Share are registered
trademarks of Dexcom, Inc. in the United States and may be in other countries. All
other marks are property of their respective owners.

Dexcom, Inc.
6340 Sequence Drive
San Diego, CA 92121 USA
+1.858.200.0200
dexcom.com
Dexcom Canada, Inc.
501 - 4445 Lougheed Highway
Burnaby, BC V5C 0E4
Sales & Customer Service: 1.844.832.1810
Technical Support: 1.844.832.1809
Dexcom CARE: 1.844.832.1811
LBL016369 Rev 003 MT25355