Dexcom G7 User manual

Instructions for Use
Start Here

Applicator
Sensor (inside)
G7 Basics
G7 shows your glucose information on your display devices.
Sensor and
Applicator
• During setup, we’ll show you
how to use the applicator
to insert the built-in sensor
under your skin
• The sensor sends a glucose
reading to your display
device(s) every 5 minutes
• The sensor lasts up to
10 days
After you insert the sensor, you
can use the overpatch to help
keep the sensor on your skin.
Overpatch
During setup, use the sensor
insertion instructions found in
the app or in the bundle with the
overpatch.
What’s in the Sensor Box
Instructions

Review Indications for Use in the G7 User Guide.
All graphics are representational. Your product may look different.
Which Display Device are you
Setting Up?
• App
Go to section: Setting Up App
• Receiver
Go to section: Setting Up Receiver
Use up to two Display Devices
Get your glucose information on your
phone or Dexcom receiver or both.
App or receiver may not be available in
all regions.
For supported smart phones and
operating systems go to:
dexcom.com/compatibility
1 Dexcom
Receiver
1 Smart
Phone
G7 Basics
G7 shows your glucose information on your display devices.

Setting Up App
1. Get Started
• Go to the Apple App Store
or Google Play Store to
download the Dexcom G7 app
• Open the app
• Login or create an account
Must have internet access for
entire setup.
Dexcom G7
4.3 K
2. Set Up
• Follow app instructions to set
up app
• For instructions on inserting
the sensor, follow app
instructions or go to
Inserting Sensor instructions in
sensor box
• After inserting and pairing the
sensor, throw out applicator
following local guidelines
3. Sensor Warmup
Sensor warmup
timer tells you
when you’ll start
getting readings
and alerts.
ProfileConnectionsHistoryGlucose
27
minutes remaining
Sensor Warmup
Your sensor is now warming up.
No readings or alerts until warmup is done.
Help
No Alerts
9:41
Prof
i
leConnect
i
ons
Hi
story
Gl
ucose
27
minutes remainin
g
S
ensor Warmup
Y
our sensor is now warming up
.
N
o rea
d
ings or a
l
erts unti
l
warmup is
d
one.
H
e
lp
N
o
Al
erts
9
:41
4. Your Sensor Session
Go to the G7 User Guide to find out
more.

Setting Up Receiver
Receiver Navigation
The receiver screen tells you
which button to use.
• To scroll faster hold down
the Scroll button
• To move to the next field use
the Select button
Save
30
Back
Enter the carbs for the meal.
10:30 AM
Meals
50%
grams
Scroll up
Go back Scroll down
Select
1. Get Started
Press Select button
for 3-5 seconds to
turn on receiver
Select
3. Sensor Warmup
Sensor warmup
timer tells you when
you’ll start getting
readings and alerts.
Menu
10:30 AM 50%
Your sensor is now warming
up. No sensor readings or
alerts until warmup is done.
Sensor Warmup
remaining
No Alerts
27:00
2. Set Up
• Follow instructions on receiver
screens to set up receiver
• For instructions on inserting
the sensor, go to Inserting
Sensor instructions in sensor
box
• After inserting and pairing the
sensor, throw out applicator
following local guidelines
4. Your Sensor Session
Go to the G7 User Guide to find out
more.

© 2021 Dexcom, Inc. All rights reserved.
Covered by patents dexcom.com/patents.
Dexcom is a registered trademark of Dexcom, Inc. in the United States
and/or other countries. Bluetooth is a registered trademark owned by
Bluetooth SIG. Apple is a trademark of by Apple Inc., registered in the U.S.
and other countries. Android is a registered trademark owned by Alphabet
Inc. All other marks are property of their respective owners.

EC REP
Dexcom, Inc.
6340 Sequence Drive
San Diego, CA 92121 USA
+1.858.200.0200
dexcom.com
Outside US: Contact your
local Dexcom representative
AW00047-05 Rev 001 MT00047-05
Rev Date 2021/06
MDSS GmbH
Schiffgraben 41
30175 Hannover, Germany