Digital Watchdog DW-VC16 series User manual

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 1.
Make sure your mouse is plugged in the back. This will make the upcoming steps easier.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 2.
Right click and select “Export” or “Backup” (depending on your model).

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 3.
1. Select the channels you wish to backup.
2. Select the start time and end time.
3. Checkmark “Add Backup Viewer” and press “Calculate.”

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 4.
Plug a USB thumb drive into the front of the DVR (this is why we have the mouse plugged
in the back!). Make note that your USB thumb drive needs to be formatted in Fat or Fat32
for the DVR to be able to read it.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 5.
You will notice that after you pressed “Calculate” your file size auto-populated with
information. This is how much storage space your file will take. The DVR will back up a
maximum of up to 32GB at a time.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 6.
Press “Scan” to allow the DVR to detect your thumb drive. It will display the name of your
thumb drive on the left and display how much free space is available on the thumb drive at
the bottom of the page.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 7.
Give your file a name. The DVR will not allow you to save without assigning a name for it to
be filed under. (Optional: You can also give the file a password for protection, but it is not
required. Press the “Start” button after you’ve named the file.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 8.
Allow your backup to complete. The length of time to back up depends on the size of the
file you are backing up. The next photo illustrates the different stages of the backup. After
the file completes the backup, press “OK.”

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 9.
Plug your USB thumb drive into a Windows®computer. Open the USB thumb drive and
you will see;
•The player folder
•The file you backed up (it will end in “.psf)
•The actual player
Double click the player icon and it will open the backup player.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 10.
Click on the folder in the top left of the player.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 11.
Select the file from your USB. If you backed up multiple files, you can select which one to
view from this screen. Press “Open” after you’ve made your selection.

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Step 12.
Your file will play immediately after selection. You will notice the time stamp, the
appropriate camera on the appropriate channel, and easy to use navigation on the bottom
of the screen to find specific times and incidents!

BACKING UP FOOTAGE ON A VMAX™SYSTEM
Additional Notes
•Your start time and end time must have footage at the exact time.
•External hard drives can work, but are not recommended.
•If you forget to add a backup player, our free Pivot™software includes a player that
will play your file.
•The backup is only viewable on Windows machines. Mac®computers will need to
rely on the “clip” function on their Mac ACS software.
•The file will only back up in the .psf format. This allows for ease when navigating
through your footage on the player.
Follow this link for our free Pivot™software. You can also back up from the Pivot software.
This is explained in the Pivot manual.

NETWORK SETUP FOR THE VMAX™SYSTEMS
This guide offers basic step-by-step instructions to set up your Digital Watchdog®DVR to
be viewed anywhere!
Step 1.
Go to NETWORK > Network on the Setup menu.

NETWORK SETUP FOR THE VMAX™SYSTEMS
Step 2.
Change the Network Type from “Static” to “Dynamic.”

NETWORK SETUP FOR THE VMAX™SYSTEMS
Step 3.
Press the “IP Detect” button and wait for the DVR to find a new IP Address.

NETWORK SETUP FOR THE VMAX™SYSTEMS
Step 4.
After the new IP Address is detected, set the Type back to “Static” and save your settings.
Your DVR is now set up on the local network!
You can now use this new local IP Address to connect to your DVR on our mobile phone
application or computer software while you remain on the same network as the DVR!

NETWORK SETUP FOR THE VMAX™SYSTEMS
Setting Up a DDNS
Step 5.
Select NETWORK > Network > DDNS on the Setup menu.

NETWORK SETUP FOR THE VMAX™SYSTEMS
Step 6.
Checkmark “Use DDNS” so the page can be edited.

NETWORK SETUP FOR THE VMAX™SYSTEMS
Step 7.
Select either “dwddns” or “dwddns2” as yourDDNS server. These are free DDNS
servers thatwe provide for your convenience.