Digital Watchdog DWC-V1312XW User manual

12X Zoom Vandal Dome Camera
DWC-V1312XW
Before installing and using the Digital Watchdog Camera, please read this manual carefully.
Be sure to keep it handy for future reference.

FEATURES
PARTS
DIMENSIONS IN MILLIMETERS
INSIDE THE BOX
CAMERA INSTALLATION INSTRUCTIONS
JUNCTION BOX INSTALLATION INSTRUCTIONS
WALL MOUNT INSTALLATION INSTRUCTIONS
PENDANT MOUNT INSTALLATION INSTRUCTIONS
CORNER MOUNT INSTALLATION INSTRUCTIONS
CONNECTING TO MONITORS
ADJUSTING THE 3-AXIS GIMBAL
CONTROL BOARD
OSD MENU AND GLOSSARY
TROUBLESHOOTING
WARRANTY INFORMATION
LIMITS AND EXCLUSION
SPECIFICATIONS
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
21

1/4” Sony EX-View HAD Double Scan CCD
600 TV Lines
3.6-44.3mm Varifocal Auto Iris Lens
12X Optical Zoom
Electronic Day and Night with Color Removal Circuit
WDR (Wide Dynamic Range)
3D-DNR (3D Digital Noise Reduction)
Star-Light (Super Low Light Technology)
DIS (Digital Image Stabilizer)
Programmable Privacy Zones (12) & Motion Detection
AGC / BLC / AWB
On-Screen Menu Programming with Built-in Joystick
Auto Sensing 24VAC/12VDC with Line Lock
Secondary Video-BNC Output for Easy Installation
RS-485 Built-in
IP66 Certified (Weatherproof)

Lens
Video Output Connector - BNC
Power Input COnnector
12VDC/24VAC Dual Voltage
RS485: BK(D+), WH(D-)
Rubber Band
Black Dome Insert
Bubble Dome
Upper Case
Assembly Screws
T20 M4X16
NPT Plug
Bottom Case
Rubber Pad
Mounting Screws
1
2
3
4
5
6
7
8
9
10
11
12
13

UNITS :MM
DIMENSIONS IN MILLIMETERS*

INSIDE THE BOX*
2
13
The following items are included with the V1312XW camera.
1. User Manual
2. Mounting Template
3. Four (4) Screws and Four (4) Dry Wall Anchors
4. Second Video Output Connector
5. L-Wrench
6. Tool - 0.89mm
7. Tool - 1.5/2.0mm
Required Tools (Not Included)
Phillips Head Screwdriver
4
5 6 7

1. Pull wires through and make connections.
Refer to page 13. Use mounting template to
mount the camera with dry wall mounts and
wood screws.
CAMERA INSTALLATION INSTRUCTIONS*
2. Adjust the camera’s pan, tilt, and zoom.
See page 14 for details.
1. Use the joystick to adjust the OSD menu.
See page 15, 16, 17 for details.
2. Attach the camera housing to the junction box
using the machine screws.

1. Check to see all parts are in
the box.
JUNCTION BOX INSTALLATION INSTRUCTIONS*
2. Use the dry wall anchors and
wood screws to mount the
junction box and rubber gasket
to the wall
3. Insert wires through the wall
and make the appropriate
connections.
4. Attach the camera to the
junction box using the machine
screws
5. Attach the camera housing to
the junction box using the
machine screws.

1. Check to see all parts are in
the box.
WALL MOUNT INSTALLATION INSTRUCTIONS*
2. Insert the wires from the
camera through the wall mount
housing.
3. Attach the camera to the wall
mount housing.
4. Use the mounting template to
make pilot holes. Use the dry
wall canchors and wood screws
to attach the assembly to the
wall.
5. Attach the camera housing to
the fixture.

1. Check to see all parts are in
the box.
PENDANT MOUNT INSTALLATION INSTRUCTIONS*
2. Attach the top shield to the
pendant mount.
3. Slide the wires from the camera
through the pendant mount.
4. Attach the camera to the
pendant mount using the
machine screws.
5. Attach the camera housing to
the fixture.
6. Use the mounting template to
make the pilot holes. Mount the
camera assembly to the ceiling
using wall mount anchors and
machine screws.

1. Check to see all parts are in the box.
CORNER MOUNT INSTALLATION INSTRUCTIONS*
2. Attach the two compression fittings to the corner
bracket.
3. Attach the wall mount bracket to the corner
mount using the machine screws.
4. Mount the camera assembly to the corner of the
wall, using dry wall anchors and machine
screws.

CONNECTING TO MONITORS*
Right
Left
Up Down
12VDC / 24VDC
CCTV Monitor
Monitor
30cm
2nd Video Output
Follow the diagram below to make proper connections to the CRT Monitor or the Monitor.
Power Connection: Dual Voltage 12VDC/24VAC (Auto Polarity Detection and Protection)
All cameras are equipped with a service monitor output, which is located on the camera module.

ADJUSTING THE 3-AXIS GIMBAL*
The Gimbal Mechanism yields maximum rotation and placement as shown below:
Z-Axis: Rotation 360
o
Y-Axis: Tilt 90
o
X-Axis: Pan 360
o
Rotation 360
o
Pan 360
o
Tilt 90
o

CONTROL BOARD*
Control Board Functions
1. Joystick Controller: Control of On-Screen Display Menu
2. CON1: Second Video Output Connector
3. CON2: RS-485 Connector
Joystick Controller
CON2
CON1
RIGHT
UP DOWN
LEFT

OSD MENU AND GLOSSARY*
MAIN MENU DESCRIPTION
CAMERA SET Camera Related Functions and Data
INTELLIGENCE Motion Detection, Etc.
PRIVACY ZONE Privacy Related Settings
PRESET SET Preset Position and Preset ID
OTHER SET
COMMUNICATION Communication Settings
SYSTEM INFO Displays System Information
LANGUAGE OSD Menu Laguage Settings
CAMERA SET DESCRIPTION OPTIONS
CAMERA ID Name the Camera. 2 Lines and 52 Characters OFF / ON
IRIS Turn on Iris and the BLC and WDR Feature ALC (-32~32) / MANUAL (-32~32)
AGC(MOTION) Set the Max Gain under Low Light OFF / ON(Max.Level Setting)
DNR Digital Noise Reduction OFF / LOW / MID / HIGH/ USER(1~16)
SHUTTER High Shutter Speed 1/60(1/50)~10Ksec
SENS-UP Slow Shutter Speed OFF / FIX X2~AUTO X256
FLICKERLESS Shutter Speed OFF / ON
DIS Digital Image Stabilization OFF / ON
DAY/NIGHT Set Day or Night Mode and Level AUTO / EXT / DAY / NIGHT
WHITE BAL White Balance Mode ATW1 / ATW2 / AWC / 3200K / 5600K
FOCUS MODE Select the Focus Mode MF / ONEAF / AF
ZOOM SPEED Zoom Speed 1~4
DISPLAY ZOOM Display Zoom Ratio OFF / ON
DIGITAL ZOOM Set Digital Zoom Ratio OFF~X12
DETAIL Aperture Gain Set 0~3
V-SYNC Set Internal/Line Lock Mode INTERNAL / LINE LOCK
Configure for Factory Defaults, Etc.
AGC COLOR SUP Amount of Color Suppression LOW / MID / HIGH

INTELLIGENCE DESCRIPTION OPTIONS
MOTION Motion Detection OFF / TRACKING / DETECTION
ADVANCED Advanced Motion Detection OFF / FIXED / MOVED
MASK AREA Motion Detection Exception Area 1~4
DISPLAY Motion Detection Display OFF / ON
SENSITIVITY
Motion Detection Sensitivity 1~7
RESOLUTION Motion Detection Resolution 1~5
ALARM OUT Set Alarm Out OFF / ON
PRIVACY ZONE DESCRIPTION OPTIONS
PRIVACY SET Set the Privacy Zone 1~12
STYLE Set the Privacy Style COLOR / MOSAIC 1~4
PRESET DESCRIPTION OPTIONS
PRESET SET Set the Preset 0~255
OTHER SET DESCRIPTION OPTIONS
LANGUAGE Select Language of OSD Menu ENGLISH / FRANCAIS / ESPANOL /
JAPANESE / KOREAN / PORTUGUESE
FACTORY DEFAULTS Set the Factory Default Setting
OSD COLOR Set OSD Menu Color BW / R / G / B
COMMUNICATION DESCRIPTION OPTIONS
PROTOCOL Protocol Set PELCO-D / HONEWELL / SAMSUNG / VICON /
PANASONIC / BOSCH / PELCO-P / GE
BAUD RATE Protocol Set 2400 / 4800 / 9600 / 19200
ADDRESS Protocol Set 1~255
SYSTEM INFO DESCRIPTION OPTIONS
SYSTEM INFO Camera Setting Information
REVERSE Horizontal/Vertical Reverse OFF / H / V / HV
POSI/NEGA Positive or Negative Video Output - / +
PIP Picture In Picture at Digital Zoom Operation OFF / ON

TROUBLESHOOTING
No VIDEO
Out-of-Focus VIDEO
Before sending your camera for repair, check the following or contact our technical specialist.
Check the coaxial cable and make sure it is connected securely.
Check the lens’ iris adjustment at the menu setup of the camera.
Check the power supply and make sure the camera has the proper voltage and current.
Check the clear dome cover and the lens for dirt or fingerprints. Use a soft cloth and gently clean.
Check the lens manual focal and zoom adjustment. Field test monitor is recommended.