Digitus DA-70887 User manual

USB-C™ DOCKING
STATION, 8 PORT
Quick Installation Guide
DA-70887

2
Product introduction
This is a high-end ABS multifunctional USB-C™
hub, which can extend the USB-C™ port on
your laptop. More ports can be extended
including HDMI, Ethernet, USB 3.0 and SD & TF
Card Reader and USB-C™ female PD charge.
Structure Diagram

3

4
Features
1. HDMI
4Kx2K 30 Hz (3840 x 2160), downward
compatible with 1080P, 1080I, 720P
2. SD/TF Card Reader
Read: 50 – 104 MB/s;
Write: 30 – 40 MB/s；
affected by card’s quality
3. USB 3.0
5 Gb/s data transfer, downward
compatible with USB 2.0;
power supply up to 4.5 W Max.
4. PD 3.0
Support 100 W power in, charging limited
to 87-96 W for safety, affected by different
firmware.
5. Ethernet: 1000 M

5
Connection

6
1
Router
5
HDMI® Display
2
Memory cards
6
USB Stick
3
Notebook
7
Mouse
4
Power supply
8
Keyboard
Note: For Video output, USB-C™ source
devices must support video output.
F&Q
Why is there no video output?
Please check the connection is good
Please use standard HDMI cable
Why is there no audio output from HDMI
port?
Please make sure that there is audio
output function on monitor.
Please set the external monitor as
default audio output device.

7
Hereby Assmann Electronic GmbH, declares that the
Declaration of Conformity is part of the shipping content.
If the Declaration of Conformity is missing, you can request it
by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany