Digitus DA-70894 User manual

Universal Docking Station,
USB 3.0, Travel
Quick Installation Guide
DA-70894

2
1. Introduction
With the Universal Travel Docking Station, USB 3.0 from DIGITUS® you
always have the most important interfaces with you. The docking
station extends your notebook with seven additional ports. It offers
two video interfaces (HDMI and VGA). The highest possible supported
resolution (HDMI): 2560 x 1140@50Hz. It also offers two USB 3.0
connections. Using the Gigabit Ethernet connection, your notebook
can also be integrated into the network via cable. To top it all off, the
station features a removable card reader with 2 slots for MicroSD, SD
cards. With its compact size, low weight and stowable connection
cable, the docking station fits into any bag and is thus the perfect
companion on the go and for travel.
1 Gigabit Ethernet 5 2K VGA output
2 USB Power 6 2K HDMI output
3 Superspeed USB 3.0 7 Status indicator
4 Micro SD/SD 8

3
1.1 Package Contents
1x USB 3.0 Docking Station

1x USB-A to USB-C Adapter

1x micro USB to USB-A cable (60cm)

1 x Quick Installation Guide
1.2 Specifications
Supports 2560 x1440@50Hz resolution (HDMI)
The video output capabilities depend on your notebook’s
graphic card and the connected monitor. Certain graphics cards
have limited MST support while some screens also restrict the
available resolution.
2 x Video connections (HDMI, VGA) - Output of video signals
with a max. resolution of 2560 x 1140@50Hz (HDMI)
Dual display support with Windows OS
- Monitor mirroring & extension
Dual display resolution: HDMI up to 2048 x 1152@60Hz,
VGA up to 1920 x 1200@60Hz
2 x USB 3.0 port for data transfer in SuperSpeed (5 Gbps)
1 x Gigabit Ethernet connection - Connect your notebook to the
network via cable
2 x Card reader (MicroSD / SD)
Dimensions: L 12.0 x W 5.5 x D 2.0 cm
Weight: 150g

4
2. Hardware Installation
2.1 Mode One (Data Transfer)
Step 1: Connect the Mini Dock to a compatible Computer
Step 2: Attach USB peripherals to the Mini Dock with Card Reader
Combo
2.2 Mode Two (Data Transfer and USB power)
Step 1: Connect the Mini Dock to a compatible Computer and
connect the USB Power Cable

5
Step 2: Attach USB peripherals to the Mini Dock
with Card Reader Combo
3. Software Installation
You can visit http://www.displaylink.com/downloads and download
the latest drivers
Windows Setup
It is represented in the Microsoft Windows Task Tray and allows you
to easily connect from
http://www.displaylink.com/downloads/windows
Double-click on the downloaded exe file start to run Setup
Note: On some operating system, you will encounter a User Control
dialog box when attempting to install the program. Please click Yes to
start the installation.

6
1. Click Install
2. Please wait while Windows configures the Displaylink Core
Software. Your screen may temporarily go black or flash during this
process.
3. When finished, the installation screen will disappear, and you will
be returned to your desktop.
Note: On some computers, you may need to reboot before being able
to use your USB-C dock.

7
3.1 Configurations (Windows 10)
3.1.1 Audio Setting
1. From the taskbar, click the Displaylink Icon, then click Audio Setup
2. Choose Speaker

8
3. Choose Microphone
3.1.2 Video Setting
1. From the taskbar, click the Displaylink Icon, then click Video Setup.
2. Select Display and choose Orientation to select Extend desktop to
this display

9
3.1.3 Advanced Display Mode
1. From the taskbar, click the Displaylink Icon, then click video Setup
2. Select Advanced Display Settings and choose a recommended
resolution
3.1.4 Uninstalling the Driver
The uninstallation will be slightly different depending on your
operating system
Please take these steps to uninstall the Driver on Windows
1. From Start Menu, open Control Panel.
2. From the Programs item, click Uninstall program.
3. Double click on Displaylink Core software. A Windows
confirmation dialog opens (if enabled)

10
4. Click Yes
5. A message may appear to state which software packages will
also be uninstalled
Click Yes to uninstall the packages that use Displaylink
Core Software
The uninstaller automatically uninstalls the software
6. Once uninstalled, you will be prompted to reboot. Click Yes to
complete the uninstall
3.2 Configurations (Mac OS X)
3.2.1 Introduction
This guide applies to software version 1.0 and above of the MAC
software
What is the Mac Driver?
The Mac driver is designed for Mac OS X 10. 4 (Tiger), 10. 5 (Leopard)
and 10. 6 (Snow Leopard), 10.7.5 (Lion), 10.8.2(Mountain Lion) to
enable you to add an additional monitor to your Mac using
Displaylink technology. This software allows you to run your UGA
devices on any Intel based desktop or laptop Mac, allowing you to
connect up to 4 additional monitors via USB.
Please Note: Power PC-based Macintosh computers, such as late-
model iMacs, PowerBooks and PowerMacs, are not currently
supported
3.2.2 Setup Guide
1. Installing / Uninstalling the MAC Driver
2. To run the MAC Installer, double-click the MAC Driverlnstaller
(image: this will mount the MAC Driverinstaller)
3. Select Software Installer to begin installing the MAC Driver on
your Mac. This will run a standard Mac installer and will require
a restart once complete.
4. Select User Guide to view the User Guide
5. Select Software Uninstaller to uninstall the MAC Driver from
your Mac. This will require a restart once complete