Digitus DA-71545 User manual

DUAL M.2 NVMe
SSD DOCKING STATION WITH
OFFLINE CLONE FUNCTION, USB-C™
Quick Installation Guide
DA-71545 Rev. 1

2
Description
The Dual NVMe Docking Station from DIGITUS® can accommodate M.2
SSDs of up to 4 TB per box. Manage a total of 2 SSDs in various formats with
a total storage of up to 8 TB. The integrated offline clone function even
makes it possible to duplicate storage media by pressing a button without a
connected end device. The copying progress is displayed by LED indicators
on the device. Supports M-Key and B+M Key NVMe SSDs in the common
formats 2242, 2260, 2280 & 22110. Easily extend the storage capacity of
numerous USB-C™ devices such as PCs, notebooks, TVs, gaming consoles or
routers.
Feature Benefits
•2 x M.2 Boxes for NVMe SSDs, each up to 4 TB
•Offline clone function by pressing a button (possible without PC)
•High data transfer rate of up to 10 Gbps
•LED indicators show copying progress
•Can be used as a storage medium for up to 8 TB in total
•Supported formats: 2242, 2260, 2280 & 22110 / M-Key, B & M-Key
SSDs (NVMe)
•USB-C™ connection: USB 3.2 Gen2
•Ideal storage extension for notebooks, PCs, gaming consoles, TVs, NAS
or routers (USB-C™)
•Plug and Play, no driver installation required

3
Technical Features
Capacity
Max. 4 TB per Box
Supported formats
2242, 2260, 2280 & 22110 / M-Key,
B & M-Key SSDs (NVMe)
USB-C™ connections
1 x Data USB-C™ 3.2 Gen2, 1 x
Power supply USB-C™
Maximum transfer rate USB-C™
10 Gbps
Modes
Clone and dual mode
Applications
PC, notebook, TV, router or gaming
console (with USB-C™ connection)
Storage formats
NTFS, FAT, FAT32
Input voltage USB-A power adapter
100 - 240 V AC / 50/60 Hz, 0.6 A -
Euro plug: Type A (CEE 7/16)
Power supply via USB-A
5 V / 3 A
Systems
Windows 10/8/8.1/7/XP, macOS
10.0 or higher
Dimensions (W x D x H)
7.9 x 7.7 x 1.8 cm
Weight
152 g
Material
ABS
Color
Black
Specials
•Supports Hot Swap (Plug in and
eject during operation)
•Offline clone function by
pressing a button (possible
without PC),
•LED indicators for copying
progress (25%, 50%, 75%, 100%)

4
Product Details
1) Clone button
2) M.2 NVMe SSD2
3) ON/OFF button
4) Power type C
5) Data type C
6) M.2 NVMe SSD1
7) Clone Indicator light

5
Basic Functions
•Insert NVMe SSD with vertical direction, connect USB-C cable
with data type C port and PC USB port
•Plug power adapter with power type C (workable with one SSD
or two SSD)

6
•View “Computer-Manage-Disk Management” to find
the new disk

7
•Right click the “Disk 1”, then click “New Simple Volume”
•According to the instruction, choose the size of partition,
then click “Next” to finish

8
•Then you can find the new hard disk in the “Computer”, it is ready to
use
•Connect two NVMe SSD
(Source SSD capacity must be = < Target SSD)

9
•Plug power adapter with power type C
•Pressing clone button for several seconds, till clone LED light
25% flash

10
•Clone LED light flash from 25%, 50%, 75% and 100%
•It means that clone completed when 100% illuminate and all LEDs
are off finally (Tip: when connect with PC again, make sure
disconnect power type C first and follow operation as PC mode

11
Disclaimer:
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures on the user
manual are just for reference, and there may be some slight difference with the real
products.
We reserve the rights to make changes without further notice to a product or system
described herein to improve reliability, function or design.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post
under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem
Schüffel 3
58513 Lüdenscheid
Germany