Dimplex Dcacp23 User manual

For domestic household use only.

INSTRUCTION MANUAL

Air Circulator + Purifier

Model: DCACP23

CAUTION: FAILURE TO FOLLOW THESE INSTRUCTIONS MAY CAUSE

INJURY AND/OR DAMAGE AND MAY INVALIDATE YOUR WARRANTY

Please read the operating instructions carefully before using your air circulator for the

first time and keep them in a safe place.

WARNING – This appliance must not be used in a bathroom.

WARNING – Do not use this appliance in the immediate surroundings of a bath, a

shower or a swimming pool.

• If the charger or supply cord is damaged it must only be replaced by the manufacturers

service agent or a similarly qualified person in order to avoid a hazard.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety.

• Children should be supervised to ensure they do not play with the appliance.

• Prior to cleaning or other maintenance, the appliance must be disconnected from

the supply mains.

• Never immerse the appliance in water or other liquids.

• Do not place on soft, unstable or non-horizontal/angled surfaces.

• Never operate the appliance if a cable or connector has been damaged, after

appliance malfunction or if the appliance was dropped or is otherwise damaged.

• Please ask a professional service agent to repair the product. Improper repair may

cause danger to users.

• Disconnect the appliance from mains power whenever it is not in use, before

relocating it, and before cleaning.

• Operate the appliance only at the voltage specified on the rating label.

• Only connect the unit to a properly installed and easily accessible socket so that

you can quickly disconnect the plug if necessary.

• This air circulator should not be used for commercial or industrial or leisure

applications or in small enclosed spaces.

• Never use the mains lead as a carrying strap or pulling lead.

• To avoid a fire or electrocution hazard, NEVER put the cord near heat registers,

radiator, stoves or heaters.

• DO NOT cover cord with carpeting, throw rugs, runners, or similar coverings.

• DO NOT route cord under furniture or appliances. Take care to position the cord

away from traffic areas and where it will not be a tripping hazard.

• DO NOT use the unit near windows or where water collects. Rain and water collection

may lead to a risk of fire or electric shock.

• WARNING - To avoid danger of suffocation please remove all packaging materials

particularly plastic and EPS and keep these away from vulnerable people, children

and babies.

IMPORTANT

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND

RETAINED FOR FUTURE REFERENCE.

Note also the information presented on the appliance

• NEVER drop or insert any object or fingers into any openings.

• Do not use the appliance in locations where paint, petrol or other flammable liquids

are used or stored.

• Do not use bug sprays or other flammable cleansers/vapour sprays on or around

the unit.

• Always switch off the unit and take the plug out of the socket:

•

If you are not using the unit

•

Before you clean or carry out maintenance on the unit

•

If a fault occurs

•

In the event of an electrical storm.

• Avoid electromagnetic interference. Keep the unit at least 1 metre away from

electrical appliances such as televisions & radios.

• Use this appliance on a horizontal and stable surface.

• Children shall not plug in, regulate and clean the appliance or perform user

maintenance.

• DO NOT incinerate the fan and its' battery even if severly damaged. This may cause

a fire.

• DO NOT disassemble and replace components of the fan randomly. In the case of

failure, contact the after sales service department.

• Only use the detachable power supply unit with this product.

• DO NOT use this appliance with an extension lead or power board..

WARNING: KEEP BATTERIES OUT OF REACH OF CHILDREN

• Swallowing may lead to serious injury in as little as 2 hours or death, due to

chemical burns and potential perforation of the oesophagus.

• If you suspect your child has swallowed or inserted a button battery

immediately call the 24-hour Poisons Information Centre on 13 11 26 (in

Australia) or 0800 764 766 (in New Zealand) for fast, expert advice.

• Examine devices and make sure the battery compartment is correctly secured,

e.g. that the screw or other mechanical fastener is tightened. Do not use if the

compartment is not secure.

• Dispose of used button batteries immediately and safely. Flat batteries can

still be dangerous.

CAUTION: No obvious symptoms

Unfortunately, it is not obvious when a button or coin battery is stuck in a

child's oesophagus (food pipe).

There are no specific symptoms associated with this. The child might:

• cough, gag or drool a lot

• appear to have a stomach upset or virus

• be sick

• point to their throat or stomach

• have a pain in their abdomen, chest or throat

• be tired or lethargic

• be quieter or more clingy than usual or otherwise 'not themselves'

• lose their appetite or have a reduced appetite

• not want to eat solid food/be unable to eat solid food

These types of symptoms vary or fluctuate. with the pain increasing and then

subsiding.

A specific symptom to button and coin battery ingestion is vomiting fresh

(bright red) blood. If the child does this seek immediate help. The lack of clear

symptoms is why it is important to be vigilant with 'flat' or spare button or

coin batteries in the home and the products that contain them.

Exposed to the

weather outdoors

Near water If the power cable

wires are frayed or cut

Where small children

may be left unattended

No extension leads or

power boards

Where there is risk

of fire or close to

a naked flame

Where the power

cable may be

damaged

On a slope or

uneven surface

Where it may be

damaged by

chemicals

If there is a risk

of water falling on

the unit

Where there is a risk

of interference by

foreign objects

This product is not

made for DIY repair

Model no. DCACP23

Power supply

220-240V~, 50Hz

Rated power

35W

Speed settings

Timer 24 hour

Air speed 5m/s

Oscillation 80°

Tilt Head 90°

Noise level (MAX)

55dB(A)

Weight (net) 3.3kg

Dimensions (w x d x h) 268 x 234 x 422mm

Filter HEPA-13

Specification

• For greater precision, please always refer to the rating label placed on the product.

How It Works

In contrast to a traditional fan which brings only cooling benefits when directly facing

you; an air circulator works for any season, keeping the air in motion and making the

entire room more comfortable to be in.

This jet stream helps maintain a constant room temperature by ridding the room of

cold and warm spots. It also clears stuffy atmospheres by circulating stale air with fresh

air from an open window.

Air circulators are the safe, all-year-round temperature regulation solution you’ve been

looking for.

Where To Position

During Summer, pointing the air circulator towards a wall halfway between the floor and

the ceiling, as well as using the highest setting, will set up a high speed air circulation

pattern.

This will cool down the room in an efficient manner. Pointing towards your air conditioner

will help distribute the cool air faster, saving time and energy; essentially Turbo boosting

your A/C.

During Winter, the use of a heater alone produces warm air that rises naturally to the

ceiling.

By pointing the air circulator upwards, and utilising the lowest speed setting, the hot air

will circulate with the cooler air near the floor, resulting in a more even room temperature.

Parts

1 Fan Body Grille

2 Front Grille

3 Fan Blades

4 Display Panel

5 Control Panel Buttons

6 Bottom Cover

7 Back Cover

8 Remote Control Holder

9 Swing Bracket

10 Swing Bracket Cover

11 Base Cover

12 Base

Remote Control

On/Off

Fan speed

Swing

Plasma

AI Purification

Increase Timer

Decrease Timer

Lights Off

Control Panel

Swing Low

Speed

Med

Speed

High

Speed

Timer

Display Plasma

Purifi-

cation

Replace

Filter

Swing AI

Purifi-

cation

On/Off Fan

Speed Decrease

Timer

Increase

Timer Plasma Light Off

Timer On

Air Quality

Monitor

Child

Lock

1. Unscrew the screw on the back of the remote.

2. To open the battery cover, press and hold in the direction of arrow 1 to release the upper

snap, and then pull it out in the direction of arrow 2 as per shown below.

3. Install 1x CR2032 3V battery in the slot. Close the cover, and place the screw back in the

hole.

4. When using the remote, please align to the position of the receiver.

5. When the power of the battery is depleted, open the battery cover as per the directions

above, and replace with a new CR2032 3V battery.

Usage of Remote Control

Note: Please remove the plastic bag from the HEPA filter before turning on the device.

ON/OFF

After the device is plugged in to a power supply, press the ON/OFF button to turn the unit

on. The defualt state the device will enter is low wind speed, with display panel and other

functionality off. Press this button again to switch the device off.

SWING

Press the SWING button to enable or disable the units horizontal swing functionality. When

this function is turned on, the SWING LED logo will be shown on the display panel. When

switched off, this will dissapear.

FAN SPEED

Press the FAN SPEED button to adjust the speed of the fan. The unit has 3 fan speeds being

low, medium and high, and adjusts in the following sequence: Low-Medium-High-Low etc. The

corresponding logo on the display panel will light up depending on the speed.

TIMER

Press INCREASE TIMER or DECREASE TIMER buttons to turn the timer function on. When

this is turned on, the 'h' logo on the display panel lights up. Press the INCREASE TIMER button

to increase the timer one hour at a time. Press the DECREASE TIMER button to reduce the

timer one hour at a time. The timer can be set for up to 24 hours. By pressing either button for

over 2 seconds, you can set your desired time quicker.

PLASMA

Press the PLASMA button to enable or disable the plasma functionality. This works to remove

germs and antigens from the air. When this is on, the PLASMA logo will show on the display

panel. When switched off, this will dissapear.

AI PURIFICATION

Press the AI PURIFICATION button to enable or disable the AI Purification functionality. When

switched on, the unit will take 60 seconds to detect the air quality. In this period, the LED Air

quality Monitor on the display panel will flash between green, yellow and red and run on high

fan speed. After 60 seconds, the LED display will settle on the determined colour and the fan

speed will automatically alter with the detcted air quality. When the air quality is good, the

LED display will be green and the device will run on low wind speed. When the air quality is

medium, the LED display will be yellow and the device will run on medium win speed. When

the air quality is poor, the LED display will be red and the device will run on high wind speed.

LIGHTS OFF

Press the LIGHTS OFF button to turn all indicator lights off on the device. If you would like the

lights to turn back on, press any button besides the ON/OFF button and all indicator lights

will turn on again.

Child Lock

Operation