Dimplex DHCER20HUM User manual

2kW Ceramic Heater
with Humidifier
Model: DHCER20HUM
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT

TABLE OF CONTENTS
WARNINGS AND PRECAUTIONS.......................................................1
STRUCTURE ...................................................................................3
OPERATION....................................................................................4
CLEANING AND MAINTENANCE .......................................................9
TECHNICAL REFERENCE DATA ........................................................12
WARRANTY ....................................................................................12

WARNINGS AND PRECAUTIONS
Warnings
Never place the unit near gas appliances, flames or
flammable liquids.
Never hit or shake the unit. Doing so may cause damage.
Never cover or obstruct the air inlet or outlet.
Doing so may cause overheating.
Never spray water on or place the unit near water.
Doing so may cause electric shock.
Never connect other appliances to the same power outlet.
Never connect or disconnect the power plug with wet hands.
Doing so may cause electric shock.
Never insert fingers or objects through the guards when the unit
is operating.
Never use an extension cord.
Always have a professional technician, manufacturer or service agent
replace a damaged power cord.
Precautions
This appliance is for indoor use only.
Do not use the unit near windows or where water collects. Rain and
water collection may lead to a risk of fire or electric shock.
Do not place the unit in a damp place or where humidity is high
(such as a bathroom).
Do not leave the unit operating while unattended.
Do not place the unit in direct sunlight to avoid surface
discolouration.

This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure they do not play with the
appliance.
Avoid electromagnetic interference. Keep the unit at least 1 metre
away from electric appliances such as televisions and radios.
Avoid scratching and damaging the surface. Do not use chemical
solvents (i.e. Benzene, alcohol) to clean the surface.
Place the unit on a stable surface when operating.
Unplug the unit before cleaning, servicing or maintenance.
Electrical connections must be in accordance with National or
Local Codes.
The rear of the unit must be at least 50cm away from the wall.
Do not place the appliance on its side, back or front while in storage
or transport. The unit must be left in an upright position 2 hours
before operation.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
WARNING: do not cover the heater. This may cause the unit to
overheat.
Do not use the heater in the immediate surroundings of bathtubs,
showers, washing stands or swimming pools.
The heater must not be located immediately below a socket‐outlet.

STRUCTURE
1. Touch control
2. Silver circle
3. Display panel
4. Front grille
5. Front cover
6. Back filter cover
7. Filter
8. Water tank nut
9. Water tank
10. Back cover plug
11. Mist output nozzle
12. Back cover
13. Water outlet cover
14. Base
15. Wing nuts (for base)
16. ON/OFF Switch
17. Power Cord
18. Humidifier indicator
19. Humidifier dial

OPERATION
DISPLAY PANEL
Power indicator
Temperature indicator
ECO function indicator
Timer indicator
High power indicator
Swing indicator
Low power indicator

CONTROL PANEL
REMOTE CONTROL
ON/OFF button
Timer/temperature set button
Mode button
Timer/temperature button
Swing button
HUMIDIFIER INDICATORS
Indicator light
Dial to adjust
mist output

PRODUCT ASSEMBLY
1. Remove the unit from the packaging. There are 3 x parts –the main
body, base & remote control.
2. Insert the base into the main body, and secure with the 2 wing nuts
provided.
3. Place the unit upright on an even stable surface.
ON / OFF
This button is used to switch the unit ON and OFF.
TIMER
A timer can be set so the unit turns off automatically after a set period.
When Pressing the TIMER button once, the ‘h’ indicator will illuminate. Press
the ‘+/-’button to set the timer between 0-12 hours. Each press of the ‘+/-’
button increases/decreases the set time in 1 hour increments. If a time isn’t
set within 5 seconds, the unit will exit the timer function and revert to
displaying the room temperature.
MODE
This button is used to switch between pre-set operating modes. By simply
pressing the button, you can regulate the mode from LOW Power to HIGH
Main body
Base
Wing nuts

Power or ECO mode depending on your needs. The unit automatically starts
in LOW Power mode.
SWING
The unit will begin to oscillate after pressing the SWING button, and the
indicator light will illuminate. To turn off the SWING function, press the
swing button again, and the swing will stop and the indicator light will switch
off.
ECO MODE
When ECO Mode is selected, the unit will automatically adjust to suitable
settings according to the room temperature. When the room temperature is
below 18°C, the unit will operate in HIGH Power, and when the room is
above 18°C, the machine will operate in LOW Power. When the room
reaches 22°C the unit will stop working, until the room temperature
decreases, and will then start working again.
HUMIDIFIER
This heater has an inbuilt humidifier function. Humidifiers put moisture back
into the air, helping reduce allergens and allergies. Humidifiers are great for
those with skin conditions such as eczema. The water tank in the unit will
need to be filled in order to use this function.

REMOTE CONTROL
The remote control can be used to operate all functions.
1. Remove the battery cover at the back of remote control (Picture
2).
2. Insert the battery (included) [Picture 3].
3. Replace the battery cover.
Operation
1. Connect the unit to a power supply and switch on.
2. The unit will be in standby mode and sound a ‘beep beep’once
connected to the power supply. The ON/OFF indicator light will
illuminate.
3. Press the ON/OFF button to turn the unit ON.
4. The unit defaults to: Low Power, no swing and a temperature setting
of 25°C.
5. Press the Mode button to change the setting. The mode is changed
in sequence: Low Power, High Power & Eco mode. The respective
indicator light will illuminate to show what mode is selected.
6. Press the Timer/Temperature button once, to set a time for the unit
to turn off automatically. The number will flash on the LED display
when the time is ready to be set. Time is set in 1 hour increments,
and can be set up to 12 hours. Press the ‘+/-’buttons to set the
desired time.